Differences Between Draw-Tite # 24892 and Curt # C11032 for 2012 Nissan Juke
Question:
Would like to buy a trailer hitch for my 2012 nissan juke fwd but cant figure out the differences of the styles other than drill and no drill. And the one that I have to drill to open the receiving hole the directions dont explain what hole that is, At least I cant tell from the instruction fig.
asked by: Eric G
Expert Reply:
If you're planning on doing some light-duty towing, you'd want Draw-Tite #24892, along with the # 118528 trailer wiring harness and the 1-7/8 inch diameter trailer ball, part # 19256.
The Curt # C11302 would install in essentially the same manner, using the same attachment points, and has an identical weight capacity. However, Cut requires the use of a stabilizing strap # 18050 to provide extra support to non-trailer loads. The strap doesn't work well with some vehicles, so I typically recommend using either the Draw-Tite model.
There is an existing hole in the frame that needs to be enlarged in order to fish the hardware though the frame, using a drill is one method to enlarge the hole. I'll link you to some videos showing how to enlarge a frame hole and how to use a fishwire to pull hardware through the vehicle frame.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Size Bolts Hold Draw Tite Hitch # 24867 to 2016 Nissan Juke
- Article: My Trailer Hitch Doesn't Fit
- Q&A: 2013 Nissan Juke Trailer Hitch Recommendation for Cargo Carrier
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Hitch and Wiring for a 2017 Nissan Juke AWD
- Q&A: Difference Between Rhino-Rack Roof Rack Legs RL210DS8 and RL210S2
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Electric Fat Tire Bike Rack Recommendation for 1-1/4 inch Hitch
- Q&A: Can Hanging Bike Rack with Adapter Bar Be Used with 80 Lb E-Bike
- Q&A: What are the Right Lug Nuts for an 8-Lug Aluminum Trailer Wheel
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch