Trailer Hitch and Towing Equipment Recommendation for 2011 Nissan Juke
Question:
Can this hitch only be used in AWD Jukes? I have a FWD SL, 2011.
asked by: Mendy
Expert Reply:
The Draw-Tite Class I hitch, part # 24867 is only compatible with AWD versions of the Juke. For the front wheel drive model, use the Draw-Tite Class I, part # 24892.
If you'll be using the hitch for towing purposes, you might be interested in the following to complete your towing set-up:
Trailer wiring harness with 4-pole trailer connector, part # 118528
Ball mount, part # 3593
1-7/8 inch trailer ball, part # 19256
2 inch trailer ball, part # 19258
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Fit of Draw-Tite Class I Hitch # 24867 Around Exhaust of 2014 Nissan Juke
- Q&A: What Size Bolts Hold Draw Tite Hitch # 24867 to 2016 Nissan Juke
- Q&A: Options For Replacing A Tie Down Turbo Lube 48394 Clear Oil Bath Cap
- Q&A: Can 215-60-8 Trailer Tires be Replaced with 215/65-10 Tires on Snowmobile Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Anti-Rattle Device Recommendations for 1-1/4 inch to 2 inch Hitch Adapter
- Q&A: Does the Pro Series Anti-Rattle Device Fit Both 1-1/4 and 2 inch Hitches
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Can Hanging Bike Rack with Adapter Bar Be Used with 80 Lb E-Bike
- Article: Trailer Lighting Requirements