Recommended Hitch for 2011 Nissan Juke for Towing 2,000 Pound Trailer With Brakes
Question:
Hello I’m looking to put the Timbren axel less axel 2000 lbs on my trailer project. I’d also like to add brakes to the build. I’ll be pulling it with my 2011 Nissan Juke. I’d like to know if I can install a class 1 hitch with a 2” ball hitch adapter to tow 2000 lbs?
asked by: Joe M
Expert Reply:
Yes, you can use a Class I hitch like the Curt # C11302 to tow your 2,000 lb trailer. I recommend this hitch if you have the 2011 Nissan Juke with front wheel drive. If you have the all wheel drive model, you will need the # C11088 instead. Both of these hitches have a maximum gross trailer weight of 2,000 lbs, so as long as you do not exceed the capacity of the hitch you will be fine.
You will also want to double check your owner's manual to make sure your Nissan Juke is capable of towing your trailer. From what I have found, the towing capacity of the 2011 Nissan Juke is 2,755 lbs (listed as 1,250kg) but you should verify that information before towing.
For a ball mount that will fit the 1-1/4" receiver. I recommend the # C45520 and the # C40018 for a 2" ball.
If you need to add wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118528. This will give you a 4-way connection at the back of your vehicle. In order to upgrade from a 4-way to a 7-way and be able to use your trailer brakes, you will need the Universal Installation Kit # ETBC7. This kit includes the 7-way adapter and everything else you need in order to upgrade to a 7-way connection.
To complete your setup you will also need a brake controller to control your trailer brakes. Check out the Redarc Tow-Pro Liberty Brake Controller # RED24FR. This proportional brake controller can mount anywhere out of the way in your vehicle so it won't take up space. The control knob mounts in the dash for easy adjustment. Pressing on the knob activates the manual override and it uses a colored LED for diagnostics. You will also want the # RED69FR wiring harness for installation.
Since you mentioned adding brakes on your Timbren Axle-Less Suspension, I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-469 for the right hand and # 23-468 for the left hand. These are compatible with the # AKHD-545-35-EZ-K you looked at for your Timbren system. These are self-adjusting brakes so they require very little maintenance and you won't have to worry about manual adjustments.
I have attached some review and installation videos for your reference.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 3 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 2 Axles
- Indicator Lights
- Redarc
more information >
Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Redarc
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel Trailer
- Q&A: Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Replacement Hub for AxleTek Hub # BD2-545-17