Recommended Trailer Hitch Receiver and Wiring For a 2016 Nissan Juke Front Wheel Drive
Question:
Looking for the appropriate hitch in install on a 2016 Nissan Juke SV FWD, any guidance is appreciated.
asked by: Ivan
Helpful Expert Reply:
I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24892 for your 2016 Nissan Juke SV FWD. With the Draw-Tite receiver you are not required to use a Stabilizing Strap # 18050 with a hitch mounted accessory, which the Curt # C11302 does require.
The Tekonsha T-One Vehicle Wiring Harness # 118528 will give you a 4-way flat lighting connector. This will be required if you will do any trailer towing, and allows you to use Auxiliary Lights # C53201 in the event a hitch mounted accessory impairs other drivers view of your tail lights. The Mounting Brackets # 18140 and # 18144 will allow you to secure the 4-way on the receiver without drilling.
If you will be towing the Draw-Tite Drawbar # 3593 with a 2" # 19258 or 1-7/8" # 19256 hitch ball is recommended by Draw-Tite.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
No-Drill Mount for Electrical Mounting Bracket - Short
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- 4 Round
- 5 Round
- Tow Ready
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Curt Auxiliary LED Indicator Lights
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Lights
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Size Bolts Hold Draw Tite Hitch # 24867 to 2016 Nissan Juke
- Q&A: 2013 Nissan Juke Trailer Hitch Recommendation for Cargo Carrier
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Hitch and Wiring for a 2017 Nissan Juke AWD
- Q&A: Difference Between Rhino-Rack Roof Rack Legs RL210DS8 and RL210S2
- Q&A: Electric Fat Tire Bike Rack Recommendation for 1-1/4 inch Hitch
- Q&A: Can Hanging Bike Rack with Adapter Bar Be Used with 80 Lb E-Bike
- Q&A: Installation of Curt Trailer Hitch on 2014 Nissan Juke SL AWD
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch