T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118392
Retail:$50.40
Our Price: $32.93
Confirmed to Fit
2017 GMC Savana Van
without factory tow package
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (432)
- Q & A (0)
- Photos
2017 GMC Savana Van - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your GMC Savana Van with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points in rear cargo area
- Plug in T-connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118392 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118392
Average Customer Rating: 4.8 out of 5 stars (432 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Terence 06/29/2024
2003 Chevrolet Express Van
very fast and accurate shipping times, ease of installation. quality product.
by: Stephan06/02/2019
Chevrolet
Hi
Installed in minutes appears to be a nice addition to our business for hauling more merchandise. BUT the four smaller flat pieces of steel that hold the bolt head spin inside the 2010 Chevy Express frame and torqueing to speck was not achieved. I was able to wedge 3 of the four plates with bolt to stop it from spinning and torqued to spec but left one middle one un torqued. The light kit will have to be installed when the vehicle is empty to access the panels for removal.
by: GromBeardo10/22/2023
Used this on my AWD Express Moto Van. Straight forward easy hookup to the factory harness. Plenty of length on the trailer side wiring to run it out the back and connect to the trailer. Definitely worth the money to save the hassle of tapping into the factory harness.
by: Ervin 03/11/2024
2013 GMCSavana Van
Was exactly what it said it is
These guys are my go to place for trailer parts
by: Matthew01/19/2020
2018 Ram 3500
Very easy to install on my 2018 Express 3500 Passenger. Follow this video: https://www.etrailer.com/tv-install-tekonsha-prodigy-p3-trailer-brake-controller-2017-chevrolet-express-van-90195.aspx
I ran the right side light in a channel over the door (see pic of me pointing to it). I used an old tension rod to punch through the gasket and pull the wires through the body... no cords dangling out of my door!
I also installed the Curt Heavy Duty hitch and the 7 wire RV harness (for vans without factory wiring)... all using the video above.
by: Travis 10/31/2023
Chevrolet Silverado 1500
wiring harness for my 1500 express van fit great plugs rite in and works great.
by: Lucas05/27/2016
2007 Chevrolet Express Van
If you can't figure out the install on this, then you should'nt be driving. Easy, fast and worth the price. I paired this with the wiring kit for trailer brakes and 7-wire harness and I'm ready to tow. 2007 Chevrolet Express AWD passenger van.
by: Melinda 06/14/2024
I think its a great product. Fits perfectly on my van.
Thank you.
by: Nikki06/17/2021
Sal was great, got the order out same day FAST. Arrived right on time. The items were exactly what I needed to get my Van together for towing complete with hitch and wiring harness.
by: Charles 05/27/2024
2021 GMCSavana Van
Everything fit very well. Assembly was very easy.
by: Christian 05/23/2024
2021 Chevrolet Express Van
I am sure it will work okay, and your videos helps as well, because I have an Express Cargo Van.
by: James S.09/07/2019
2018 GMCSavana Van
Both products were huge disappointment but this one was a total joke. The connectors do plug right in but the wires are too short to cleanly route or hide they have to be hanging in the air to reach - same behind the vehicle. This is worthless unless you just want the plugs, you will have to cut and buy a new flat to extend to your receiver unless you just want it all hanging from the plugs in the way of your cargo.
by: Don07/23/2020
2019 Chevrolet Express Van
Excellent just as advertised received curt class lV and wiring # 118392 via UPS had it all installed in just over an hour
by: Dave 04/05/2024
Bolts on plugs in and working
by: Rafael 02/28/2024
2019 Chevrolet Express Van
Super easy to installed.
by: Natalie (sending a review on father s behalf)04/12/2022
2003 Chevrolet Express Van
I can't even write a review because the item was stolen due to poor packaging. The item was sent with the shipping label slapped on instead of putting it in a separate box. Disappointed.
by: Eric05/20/2020
This wiring product worked perfectly plug and play. Hardest part was running wires from inside van to the outside. There is a removable cap at bottom of body pillar under brake lights. Easiest to remove cap and run single wire up and tape harness and pull back out.
Only problem I noticed is my van was prewired so I bought wrong kit but this kit worked perfectly so I just stayed with it.
Works even better attached to the heavy duty hitch that I got from etrailer too.
You shouldn't be disappointed with this easy to install product!
Eric
5/21/2021
Its been a year and still working without any issues.
by: Zach11/23/2023
super easy to install went in no proble ms
by: Agustin 07/24/2022
Excelente servicio y entrega muy rápida
Muchas gracias
100% recomiendo esta pagina
Agustin
7/25/2023
It didn’t last a 6 weeks
by: Alan02/02/2018
etrailer did a great job as usual but the vehicle this part is designed to fit does not have any existing openings to pass the connectors through so the wires all had to be cut and spliced back. I might as well bought an inexpensive vehicle side pigtail and spliced unto the wiring harness. It would have gone faster.
Mike L.
2/3/2018
This particular wiring harness is meant to remain in the cargo area of the van until its needed. When you need to use it, just run it out the back doors and shut the doors. The weatherstripping around the doors is thick enough that the wires will not get pinched or damaged, as long as you avoid the door latches. Installing the harness in this manner protects the connector from damage and from moisture.
by: Mark01/07/2017
2011 Chevrolet Express Van
Easy install. This wiring harness worked well for about 6 months. Now when I hit the brakes the trailer lights do not work properly.
Laura E.
1/17/2017
Mark, thank you so much for your order and your feedback. The number one cause of faulty wiring harnesses is a loss of ground. To troubleshoot your wiring harness, I recommend checking out our wiring FAQ, which can be found at the following link:
Helpful Links
by: Mark 08/20/2020
2019 Chevrolet Express Van
The harness plugged in my express van , just like in the video. Perfect fit , took about 20 min , use caution when removing the trim panels , use a removal tool.
Mark
8/21/2021
Still working great , all the wiring connections are inside the van , so always protected until use.
Mark
8/21/2021
Still working great , all the wiring connections are inside the van , so always protected until use.
by: William 05/22/2023
Works great, only wish there were more zip ties with the kit
by: Pete 03/10/2023
This wiring harness was top notch! plugged up easily and quickly and did exzctly what it was intended for
by: Bernard09/08/2018
2010 Chevrolet Express Van
A real time saver for my work van, all connectors fit great, the wires could have been maybe three or four inches longer, I can't believe that GM does not offer something like this, thank for the great product and fast shipping and a good price!
Bernard
9/8/2019
Working great, very happy with this product
25
432
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- 2019 Chevy Express 3500 Trailer Wiring and Brake Controller RecommendationsHey Scott, thanks for reaching out! The parts you're looking at will definitely get you what you're wanting in terms of wiring and a brake controller on your 2019 Chevy Express 3500, but I actually recommend swapping out the Hopkins Wiring # 31345 with the Tekonsha T-One # 118392. In my experience, Hopkins is less reliable and I wouldn't be surprised if you had to end up changing out that wiring a little further down the road. So for your application I recommend the following parts: ...
view full answer... - Recommended Trailer Hitch and 7-Way for a 2015 Chevrolet Express VanThe Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41946 is a great option for a 2015 Chevrolet Express Van. It will allow you to tow pretty much any trailer within reason due to the Class V rating. I have attached an install video below. In order to complete your setup you'll need wring as well, the T-One Vehicle Wiring Harness part # 118392 would start you off with a 4-way which could then be adapted to a 7-way using the 4 to 7-Way with 4-Way Adapter part # ETBC7. It does not sound...
view full answer... - Recommended Trailer Hitch Receiver for 2005 Chevy Express 2500 3/4 Ton VanThe Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41946 is a confirmed fit for your 2005 Chevy Express van but the measurements are correct. This hitch does require drilling to install rounding out the holes, so that may account for the difference. My recommendation for you is to use the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14090 which measures 40 inches wide on center. This hitch requires no drilling for installation....
view full answer...
- Installing Electric Brake Controller on 2014 Chevrolet Express Van Without Factory Tow PackageTo install the Tekonsha Prodigy P3 Electric Brake Controller # 90195 into your 2014 Chevrolet Express the black wire from the controller will go to 12 volt power, the blue wire runs back to your 7-way trailer connector at the rear of your van, the white wire is for gound, and the red wire connects to the cold side of your stop light switch. If you don't already have one you will need a 4-way trailer connector installed. The wirnig harness # 118392 will fit your van. Then you will use...
view full answer... - Does Blue Wire of 7-Way Need to be Connected when Using Curt Echo Brake ControllerHey John, so since the Curt Echo part # C51180 provides it's own brake output circuit you don't need to connect the blue wire of the 7-way adapter part # 37185 on the vehicle side. Only the black wire needs to be connected. Which we have a version of this adapter with just what you'd need with the part # ETBC7. If you need a 4-way too you'd want the part # 118392 and you'd be set.
view full answer... - Class 4 Trailer Hitch, Trailer Wiring, & Brake Controller For 2021 Chevy Express VanWe can get your customer's 2021 Chevy Express set up with a Class 4 hitch, as well as the needed trailer wiring and brake controller. I'm going to assume they do not have any OEM wiring since they do not have the factory 7-way. What you will need are the following: - Curt Trailer Hitch Receiver # 14090 - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118392 - Universal Installation Kit for Trailer Brake Controller # ETBC7 - Redarc Tow-Pro Liberty Brake Controller...
view full answer... - Parts Needed To Tow Trailer With Brakes With 2018 GMC Savana VanFrom your photo it does not look like the 2018 GMC Savana Van has a 7-way factory tow package. There is not a 7-way pin available that plugs into the plug you have shown. First you would need T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118392 for a 4-way connector that plugs into the plug you have pictured. I have attached an installation video for your reference. Then you can use a 4-way upgrade kit part # ETBC7L and brake controller Curt Echo part # C51180...
view full answer...
- What Hitch and Wiring Harness Do I Need for Towing an 8000 Pound Camper on a 2007 Chevy Express Van?For towing an 8000-pound camper on your 2007 Chevy Express 2500HD, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class IV - 2" # e98861. The etrailer hitch has a gross trailer capacity of 10,000 pounds and a maximum tongue capacity of 1,000 pounds. Since you have a 2007 Chevy Express without a towing package, the only plug and play option we carry is a 4-pole connector, but you can convert it to a 7-way. For this route, I recommend the T-One Vehicle...
view full answer... - Adding a 7-Way Trailer Connector and Brake Controller to a 2016 Chevy Express LT If your 2016 Chevy Express van did not come with a factory trailer connector at the back then we have to assume that it does not have the factory tow package. It could have some of the wiring for it but just not active. In order to install a 7-Way trailer connector you would first need a 4-Way using # 118392. Then, after that is installed, you will need # ETBC7 to install the 7-Way and retain the 4-Way. If you pull the cap off that plug in your picture and it turns out to be a functional...
view full answer...
- Is Non-Powered 4-Pole Wiring Harness Safe for Use in 2008 Chevy Express 3500 15-Passenger VanFor the 2008 Chevy Express 3500 15-passenger van we do have non-powered 4-pole harnesses # 118392 and # 55540 that are intended to add trailer wiring for vans without the tow package. These simply plug in at the two tail light assemblies to get the necessary lighting signals for the trailer and that lighting power is then drawn through the van's own internal wiring. We also have a powered converter harness # 31345 that uses a separate 12V power connection to the van battery. This provides...
view full answer... - Recommended 7-Way and Brake Controller on 2019 Chevy Express VanFor the 2019 Chevy Express Van 2500 without a towing package, you will need the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118392 which will give you a 4-pole to start with if you don't already have one. Then you will need a 4-pole upgrade kit part # ETBC7 which comes with all of the components needed to wire in a functional 7-way on your van. I have attached the video and wiring diagram for your reference. It sounds like you may be towing a trailer...
view full answer... - Where to Connect 4-Way Trailer Wiring Harness on 2020 Chevy Express 2500 Without Tow PackageThanks for the photo and let's start with the correct 4-way for your 2020 Chevy Express 2500, which is the T-One Vehicle Wiring Harness # 118392. As you can see by the cut out of the linked installation instructions I added, you will connect the harness to the plug on the driver's side, which you have pointed out in your photo. I have added a link to an installation video I recommend checking out as well. Then to add a 7-way you will need to hardwire in the Universal Installation Kit...
view full answer...
- Parts Needed to Add 7-Way Trailer Connector to 2014 Chevy Express VanYou would first need to start with a 4-way if you do not have one already. For that you would need the part # 118392. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller I would recommend the Prodigy...
view full answer... - Installing 7-Way on 2017 Chevy Express VanTo install a 7-blade in your 2017 Chevy Express van, presumably for a brake controller, you are going to need to do some hard wiring. For a brake controller the first thing you'll need is to add 4-way # 118392 and I've added a link to a video showing how this is installed in a '17 Express. Then to add a 7-way you will need the Universal Installation Kit for Trailer Brake Controller # ETBC7; I have also added a link to a video showing a brake controller being installed in a similar Express...
view full answer... - What Hitch do you Recommend for my 2020 Chevrolet Express Van?For a basic everyday type of hitch the etrailer Trailer Hitch Receiver part # e98861 is the way to go it offers the 2" x 2" receiver tube opening and has a very nice matte finish that looks great. If you're going to be maxing out the Express's towing capacity I recommend the Curt Trailer Hitch Receiver part # C15320 this has the same 2" x 2" receiver tube opening and is best suited on the 2500 and 3500's doing some serious hauling. As far as wiring the Tekonsha T-One Vehicle Wiring Harness...
view full answer... - Trailer Wiring Recommendation for a 2008 Chevy Express VanBoth the trailer wiring harnesses you referenced have been confirmed as fits for your 2008 Chevy Express Van. Either would work well but they have their pros and cons. The # 118392 will install much easier but will not have the circuit protection. In the event of a trailer wiring short you may end up popping fuses in your vehicle or damaging the circuits. The # 31345 will be a bit more difficult to install, but it will offer some peace of mind as trailer wiring shorts won't damage the...
view full answer... - Correct 4-Way Trailer Connector for 2019 GMC Savana 2500 VanThe trailer wiring harness for your 2019 GMC Savana 2500 van will simply plug into connectors behind the trim panels inside the rear of your van, and does not have a converter. The correct wiring harness is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118392.
view full answer... - Adding a 4- and 7-Way Trailer Connector to a 2015 GMC Savana Van 2500If your 2015 GMC Savana came with the factory tow package then # HM40975 would plug into a factory harness already present under the van. It is usually tucked up above the spare tire or in that generally area. If that harness is not present on your van then you will need to hardwire in a trailer connector starting with # 118392 for the 4-Way. Then to add a 7-Way and retain the 4-Way I recommend # ETBC7. It also comes with the wiring and accessories to wire in a brake controller. I have...
view full answer... - Trailer Wiring and Hitch for 2019 Chevy Express Van without Tow PackageIf your 2019 Chevy Express Van does not have any trailer wiring or a hitch there's a strong chance you don't have it but you can verify this by checking the VIN with a Chevy dealer. So for trailer wiring you'd want to start with the 4-way part # 118392 which is custom fit for your vehicle. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached...
view full answer... - Recommended Heavy Duty Trailer Hitch Receiver for 2006 Chevrolet Express CutawayFor a heavy duty hitch for your 2006 Chevrolet Express 3500 Cutaway I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41991-07. The problem with using a hitch like the etrailer Trailer Hitch Receiver # e98861 is that it is designed for the cargo and passenger van, not the cutaway, so it has a small hitch drop in order to clear the factory bumper. The # 41991-07 has a weld on installation and will fit vehicles with frames up to 62" with...
view full answer... - Determining if 2019 Chevy Express Van has Tow Package for Installing Trailer WiringIf your 2019 Chevy Express Van 3500 has the tow package there will be a round connector taped behind the rear bumper that a 7-way like the part # A10-7072VP could attach to. Otherwise you'd need to install a 4-way first like the part # 118392.
view full answer... - Recommended 4 and 7-Way Trailer Connector for a 2014 Chevy Express VanIn order to add trailer wiring to a 2014 Chevrolet Express Van you'll start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118392 which provides a 4-way and is plug and play. You can then adapt this to a 7-way for towing a trailer with brakes, the 4 to 7-Way with 4-Way Adapter part # ETBC7 is the perfect choice for this as it includes both the 7 and 4-Way connection as well as containing everything else you need to hook up a brake controller (wires, circuit...
view full answer... - Wiring And Brake Controller Needed For A 2006 Chevy Express Van 1500Hey RJ, For the 4-pole wiring I recommend the Tekonsha T-One Vehicle Wiring Harness # 118392. This comes with plug-in connectors for a fast and easy installation. From there you'll want the # ETBC7 to get the 7-way. It will plug into the Tekonsha 4-pole connector and have a few more wires to run. I've attached videos for both of these harnesses to help walk you through the installation process. I do recommend picking up a no-drill bracket # 18136 to make mounting the 7-way on the trailer...
view full answer... - 7-Way Trailer Wiring Connector Recommendation for 2006 GMC Savana VanSo if you have a 7-way factory connector already installed on your 2006 GMC Savana Van 3500 the 7-way kit part # HM40975 will fit and work well. If you do not have any trailer wiring at all currently you'll need to first start with a 4-way like part # 118392. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller....
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Jared G
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Stephan
6/3/2020
light kit went easy all is well thanks. One thing, keeper pin a little hard to access so far under the bumper but the hitch does its job.