Designed to mount in the center of your vehicle's bench seat, this console is the perfect mini-workstation for a contractor on the move. Flip the armrest up to access the huge storage area and get a writing surface as well.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the Rampage Contractor Center Console in a nice charcoal color. That's going to be part number RA39423. The Rampage Contractor Center Console is going to be a great addition to your bench seat. This is designed to mount in the center of your vehicle's bench seat. This console is going to be perfect as a mini workstation. Take a look here on the inside.
We have one big compartment with a removable tray to get all our items in there as needed. One of the neat features I really like is we have a built-in clipboard right here for your paper or notepad or notes in there. You can just simply use it as a workstation as needed. Clips in place. All set with an elastic band here.
That way, you can always keep whatever paperwork you have in there nice and tidy. You could even throw a pen or highlighter or pencil in there and it'll hold it in place as well. Folding it back down in this position, you're going to see that it offers two cup holders here at the front of the unit. These are fully adjustable. Bring'em in and you can fit a variety of different cup sizes. Push that spring-loaded button to extend it all the way back out. This console has an oversized hinged design right here.
That's actually going to open up for the rear of the unit. Flip that open. It's got this nice little stop here that's going to rest against that hinge design which is going to add a lot of stability when you decide to use the writing surface. Here in the tray, it's got a nice little handle so you can use it or move it. It's going to allow you to gain access to the larger compartment.
Plenty of storage space in there. Throw in anything that you need. Now, this isn't just for a contractor. You can use this in any vehicle in the front or rear that has a bench seat and a seatbelt going across it to secure it. Once we have that tray in place, you can see that we have slots up here for our coins. It's going to fit your quarters, your dimes, your nickles, and your pennies. We can also use some of these other compartments just to store some of your other gear.Now, here on the inside, it's got nice felt material. It's going to add some protection in case you have any items in there. If we want to put our phone in there, screen down, we don't have to worry about our screen getting all scratched up or anything like that. Nice, protective lining for the interior of the console. When it comes to the overall dimensions, it's going to measure about 18.5 inches long by 10.5 inches wide by 8 inches tall. Let's go and show you how this installs right here on our bench seat. Here on the bottom, you're going to find a seatbelt loop. It's the black loop here on the bottom of the console. It is designed to be wide enough to fit your standard sized seatbelt and buckle system. What you want to do is you want to go ahead and flip it down, position it kind of where you want it, and then we're going to use that seatbelt strap here on the bottom to run our seatbelt through. Just a little note that this will tighten up a little bit better if you make sure that your seatbelt stays straight and doesn't get all twisted during this process. Move my hand out of the way so you can see. Simply just going to run this through the loop here on the bottom of the console just like that. We're going to go and attach it to our seatbelt. Then over here, I have the excess strap from the seatbelt just as if you we're tightening up a seatbelt, like you had a passenger sitting here in the middle.We're going to do that same thing for our bench seat. Once we have that tight, you can see that it's pretty secure in there. It is going to move a little bit. That's going to be normal with a system like this. We want to make sure we can get it as tight as we can. That's going to be it for the install, part number RA39423, The Rampage Contractor Center Console. .
Average Customer Rating: 4.6 out of 5 stars (12 Customer Reviews)
Designed to mount in the center of your vehicle's bench seat, this console is the perfect mini-workstation for a contractor on the move. Flip the armrest up to access the huge storage area and get a writing surface as well.Great online source for trailer related items. Fast turnaround and in-stock always. Second time to order from them ,ordered hard to find 12" radial boat trailer tires, no problem they had them in stock , received them in two business days, and did not have to pay additional fast freight charge, GREAT! Will order again from them if the need comes up ,strongly recommend this online site for your normal and hard to find trailer parts and the convenience to order right from home.
Have this in the back seat of our van for a year now. It has weathered a couple trips. works as designed. An awesome addition to a bench seat van. Would I buy it again? you bet. Would I like to see anything changed? not really. It works great.
Fit perfect for our GMC 05 Safari. Needed a little extra storage for small items after it was converted to a camper van!
Quality is not top notch, but it works well. No real complaints
Just what I was looking for and fit and functions great.
It was as I expected. It could have been an inch or two wider. I believe it will work out fine
Perfect fit, great work space!
Do you have a question about this Car Organizer?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.