TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(1505 reviews)
Price: $387.71
In Stock
Customers prefer these similar products
- All Info
- Reviews (1505)
- Q & A (0)
- Photos
TorkLift Camper Tie-Downs
- Rear Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with front tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
T3303 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLT3303
This Product Fits The Following Vehicles
- 2005 - 2014 Toyota Tacoma 2WD - without board or step underneath truck bed and with a factory installed hitch
- 2005 - 2014 Toyota Tacoma 4WD - without board or step underneath truck bed and with a factory installed hitch
- 2015 - 2015 Toyota Tacoma 6 Foot Bed and 4WD - Double Cab - without board or step underneath truck bed and with a factory installed hitch
Customer Satisfaction Score:
81% were satisfied with this product
19% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLT3303
Average Customer Rating: 4.7 out of 5 stars (1504 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Solo08/15/2015
My order arrived 2 days ahead of the listed delivery date. I am very pleased! I appreciate the excellent customer service! You can use this email for satisfied customer reviews.
Best Wishes! Solo
by: Daniel 02/10/2024
by: Laura 08/01/2023
by: Charles 12/21/2022
A little tougher to install than the front ones but not too bad. Torklift tie downs are very well made, tried he bumper attached one but I guess bumpers aren't what they used to be I saw bending at the tie down after one trip. So bought these. Entrailer as usual priced well and fast shipping.
by: Tim C03/03/2024
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
by: Fred06/02/2023
Got the tie-downs today. Shipped quickly. There is an extrusion ridge on the inside of the square tubing my hitch was made from. I had to file that out. Once done, everything slipped together like an Erector-Set project. Whole thing took 20 minutes. Very pleased.
by: Flanagan06/18/2023
Easy to install. Took less than an hour with no helper. They are very sturdy and I expect them to last.
2020 RAM 3500 with OEM hitch.
by: Keith09/05/2022
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug
by: Stacey07/12/2023
Poor packaging, missing parts and showed up looking used from being beaten in shipping.
by: James02/02/2024
The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
by: Richard02/14/2024
The rear tie downs do not extend out far enough to avoid the dully rear fender and has damaged the paint on the fender.
by: Jennifer03/21/2021
My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.
by: Okie11/10/2020
I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, despite the poorly written instructions. Also, the kit did not include a bolt fisher for the 7/16 bolt. The bolt fisher supplied was for a 1/2 inch bolt. Fortunately I had the correct bolt fisher from a previous project. I am also disappointed that the tie down hole has a slot cut in it which seems would significantly weaken it. I am not optimistic that the tie-down point will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot in the tie-down point shut to strengthen it.
by: Don 01/21/2023
The Superhitch is an amazing product. Had a couple now. Expensive but you get what you pay for. Purchasing from E-trailer is very easy and they delivered the product quickly.
by: Tom05/01/2024
Product was easy enough to install, works as designed, very happy. Shipping boxes continue to be an issue, not up to the job!
by: Fishride04/17/2024
Torklift tie downs work great!
by: Gilbert C04/11/2024
Frame mounted tie downs that attach to the reciever. No holes to drill!
by: Keith03/07/2024
I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.
by: Israel 01/23/2024
This is my second set for the TorkLift tie-downs, and I would not use any other type. We use it daily; our camper never comes off as we are constantly on the move. In the event we have to remove it for vehicle service such as alignment, it is easy to remove and get back on.
by: Jim 05/12/2024
rear bracket went on nicely . front not so . feeding guyed wire was difficult. the packet are well made and heavy duty.
by: Angel O12/20/2020
Steve Z at etrailer was sharp and very knowledgeable on the companies product. Steve was able to work with me on getting the proper camper tie downs for my 2015 Dodge Ram 1500 (Item #TLD3107). He told me when they would be arriving and they actually arrived earlier than expected. Great product, install was pretty easy, I had them installed within an hour. This is a very high quality product with heavy duty construction. They provide a secure attachment for tie downs to the truck camper. The instructions provided are adequate, but not great. I Don't normally give recommendations or endorse products, but these I am truly impressed with. Thank you so much Steve and etrailer.
by: Chris S01/27/2024
TLN2410 installed on 2016 Titan XD. Very sturdy product, all hardware was good. Will require 3/4”(19mm) and 14mm sockets. Note: directions a little off, you can fish the 7/16 bolt and plate through the bottom hole in frame as shown, but don’t try the 1/2” bolts there (ask me how I know, spent 20 minutes fishing the plate back out). Use the hole just above what is shown in the picture, on the side of frame, it will accommodate the 1/2” hardware. Also the front mounts will not quite clear the full length oem running boards which I was aware of and will swap out for shorter boards. Other than the “minor detail” with the instructions, they are fine and the mount is solid.
by: Craig03/25/2022
Forklift tie downs are manufactured to exact fit to existing manufactured frame rail holes. They lined up perfectly and after 6000 miles with camper on board have stayed secure. The only downside, (this is relative to when and ware you use you camper) they will corrode when driving through snow covered roads that have been treated with sand and/or salt. I use an oil based product to protect them corroding.
by: Tom09/01/2017
I really don't write reviews often but when everything is perfect is worth the time. I am a repeat Etrailer customer so it didn't surprise me that my shipment was complete and received in two days. These TorkLift frame mounted camper tie-downs are high-quality, heavy duty and powder coated. I put a full set on my new 2016 Ford F350 SRW 4 X 4 and will be using them with a Lance 855S truck camper. Installation went flawless without any drilling or adjustments. Instructions were clear and to the point. The most important benefit to the product is that your camper is held to your truck by the frame and not the bed and bumper. This reduces camper sway, movement and stress on the truck body. As far as appearance the tie down arms are removable for when the camper is not in use. This sure beats drilling holes in your truck bed, bumper and attaching brackets that permanently stay on the truck. Hats off to etrailer and TorkLift!
by: David 05/04/2024
Could not believe the quick delivery of my tie downs outstanding
25
1504
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Recommended Camper Tie-Downs And Turnbuckles For A 2006 Toyota Tacoma To mount a truck bed camper to a 2006 Toyota Tacoma you would need the following tie-downs: For 4WD Models without a board or step underneath the bed and a factory hitch: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303 For 2WD Models without a board or step underneath the bed and a factory hitch: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2308 TorkLift Custom Frame-Mounted Camper Tie-Downs...
view full answer... - Recommended Camper Tie Downs For A 2014 Toyota Tacoma If you're needing camper tie downs for your 2014 Toyota Tacoma then there are two different options based on whether your Tacoma is 2WD or 4WD: For 2WD models you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2308 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303. For 4WD models you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303. I do want to...
view full answer... - Rear Torklift Truck Bed Camper Tie Downs for 2001 Ford F350 With Factory HitchAlthough the # TLT3303 tie-downs aren't a fit for your 2001 Ford F350, we do have a rear tie down fit that's compatible with a factory hitch. For a steel tie-down, use # TLF3001 or # TLF3001A for an aluminum/stainless tie down.
view full answer... - What Size Pins Connect the Slide-In Part of the TorkLift Custom Frame-Mounted Camper Tie-Downs?I reached out to my contact at TorkLift International, and the pins you are referring to are 1/4 inch diameter and 2-1/2 inches long for the TorkLift Custom Frame-Mounted Camper Tie-Downs for a Toyota Tacoma. These frame mounts are vehicle specific and any step rails could cause interference.
view full answer... - TorkLift Basic SpringLoad Turnbuckes Compatibility with 2013 Toyota Tacoma with Factory HitchThe TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000 will work on your 2013 Toyota Tacoma with factory hitch. You will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 and Rear # TLT3303 for the proper fit on your 4 door 4x4 with 6 foot bed and factory hitch if you don't already have the tie downs for your truck. Let me know if you have further questions.
view full answer... - Torklift Tie Downs That Fit 2007 Toyota TacomaIf your 2007 Toyota Tacoma is a 4WD the front Torklift Camper Tie Down you'd need is the part # TLT2303, if 2WD part # TLT2308. If you have a factory hitch the rear tie down you'd need is the part # TLT3303 or if you have an aftermarket hitch part # TLR3500.
view full answer... - Recommended TorkLift Camper Tie-Downs For A 2014 Toyota Tacoma 4WDFor 4WD models you'll need to use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2303 for the front and # TLT3303 for the rear. If you have a 5' bed and running boards under the cab will need to remove the running boards to install tie down. To complete your setup you'll also need some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020.
view full answer... - Weight Of The TorkLift # TLT2303 And # TLT3303 Camper Tie-DownsThe TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 weighs approximately 17lbs and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303 weighs approximately 19lbs.
view full answer... - Correct TorkLift Tie-Downs for a 2014 Toyota Tacoma 4WDSince your 2014 Toyota Tacoma is a 4WD you need the following tie-downs: - Front # TLT2303 - Rear # TLR3500 These fit whether you have a factory hitch installed or not, but please note you truck can't have a step or board installed otherwise they won't be compatible.
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Written by:
Lindsey S
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
David F
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.