Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
(218 reviews)
Price: $203.80
In Stock
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
Item # HSSF
Retail:$220.09
Our Price: $203.80
You Save: $16.29
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (218)
- Q & A (0)
- Photos
- Used (1)
Brophy Camper Tie-Downs - HSSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with the included T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSSF CR Brophy Truck Camper Tie Downs for Slide In Truck Camper - Camper Hold Down - No Drill Tie Down - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4 - HSSF
Average Customer Rating: 4.6 out of 5 stars (218 Customer Reviews)
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.by: TheAvionNomad01/18/2024
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use.
I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
by: Pat03/20/2023
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for
a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads.
Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working.
Thank you etrailer for your super fast shipping and online product videos.
by: Ed B.05/21/2019
Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.
by: James 05/20/2024
Ordered these for new camper. Very easy to install and does the job without the high cost of frame mount.
by: Jeff Smith10/22/2023
These tie downs work great. It holds my 3k lb Cabover camper in place without issues. And I live in my camper, so not losing my home is very important to me!!
by: Shelly12/13/2023
The products arrived on the time scale as stated. The packaging did not hold up and the box with the metal tie downs was broken open. There was too much weight for the box and it just split open. Not sure if anything is missing. Packaging of items that are heavy should be more secure and sturdy.
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you. If anything is missing we can take care of it.
by: Allen.08/22/2022
These wont work for my truck and camper. The box on a 2018 gmc 2500 short bed does not lend well to placement of these in order to get the correct geometry i needed for the tie-down points on my Palomino maverick 6601. I had high hopews of not having to buy the frame mounts, but i will have to.
Mike L.
8/31/2022
The HSSF tie downs have specific fit parameters as mentioned in the product specifications above: External bed rail width cannot exceed 5-12 Requires at least 2 of space beneath lip of bed rail Not compatible with -in bed liners, bed rails, double-walled beds, or side-step beds
Allen.
8/23/2023
In response to the etrailer comment response, they fit on the bed fine, with plenty of clearance and would work for a smaller camper. they just did not fit in the right spots for my truckcamper combo.
by: Ron W07/02/2016
As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.
by: . George01/03/2024
The tie downs are great no problems.Very easy to install.I keep them on my truck all year long Thank you
by: Terry08/08/2023
Order arrived quickly, priced ok. Box was broken open by shipper NS the 4 T-bolsts bolts ere missing. Etrailer shipped ou the missing parts a few days later, but in the meantime I fashioned t-bolts I could use for my trip. Many customer comments on this camper Brophy tie-down match my experience. Etrailer follow up was great, but surely must be aware that their packing is sub-standard. Perhaps zip-tying the T-bolts to larger pieces would eliminate the loss even in case of breakage. Functionally the tie-dows were easy to install and seem quite adequate for off-road use of my in-bed camper. Will continue to use etrailer because of their excellent customer service.
by: captkirk02/15/2021
These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.
by: Mike S05/23/2020
These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.
by: Bing09/23/2019
I received this tie downs on July, and first used it yesterday.
My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper.
The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.
by: Brent 08/08/2019
I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks.
The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something.
As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.
by: Patrick04/02/2020
These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.
Patrick
4/6/2021
Still have not moved! Great design and cost savings.
by: Matt04/14/2015
These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping.
Overall I am pleased with the quality and price
by: Regan06/25/2019
Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!
by: Bryce05/10/2022
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
by: John05/25/2020
Easy to install and have done what’s expected. Keep the camper in place!!
by: JAMES K09/24/2012
ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE
by: Chuck11/13/2012
Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.
by: Neil08/04/2021
Arrived on a rainy day with the box falling apart. Too much heavy steel to be loosely packed. Fortunately, the hardware bag was still there. Some bare metal showing. I had some emails with MacKenzie B. and they were responsive and without asking they offered me a 5% refund for the damage. After my first trip, they performed well on some very bumpy roads. Held strong and didn't move. I did have to re-adjust the lower standoffs after the first week. Taking them on/off is frustrating because the 2 nuts are in the small gap behind the clamp against the inner bed wall. Too tight for all but an open end wrench. 1/6 turn times too many fumbling tries, arg! Also, I was nervous not having a locking feature (lock washer, locknut, etc). I bought 8 locknuts (pinch type) and welded them to the inner plate. Then bought 8 round head hex bolts (grade 8). So now I can install easily with an Allen socket. See pictures. Recommend eTrailer consider this modification.
Neil
8/5/2022
After my mount bolt mod, Ive used these multiple times and they are working great! Very stout and no visible marks on my F250 bed.
by: Jason S.06/05/2019
These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.
Jason S.
6/8/2020
A year later & they still hold strong.
by: Dayton12/15/2023
Awesome customer service my new fav pl ace
by: dave07/08/2016
Its a good product for a light camper. I personally would not use it on anything heavier than 1000lbs. But then iam not an engineer. I sold mine and my camper and bought frame mounted tie downs
Dave
7/11/2017
Did not work for me. Tried to send them back but shipping would cost a bundle so i would get less than half of what i paid. Sold them same day on-line. Not good for a larger camper.
Rachael H.
7/12/2017
25
218
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Camper Tie Down Recommendation for a 2014 Ram 1500 with Running BoardsI have a set of camper tie downs that will fit your 2014 Ram 1500, but they attach at the stake pockets of the bed and not the frame like the Torklifts do. There is no Torklift option for your truck if it has running boards. The Brophy Camper Tie Down, part # HSSF is a universal fit item and will work on your 2014 Dodge Ram 1500. The Brophy Tie Down mounts over the sidewall of the truck bed. The recommended hardware kit to install part # HSSF is Camper Tie Down Hardware Package, part...
view full answer... - Camper Tie-Down Recommendation for 2005 Dodge Ram 2500We do offer Brophy tiedowns that will fit your 2005 Dodge Ram 2500 as long as it does not have a stepside bed or dual rear wheels. The Brophy tiedowns that will work for your application is part # HSSF. The hardware kit you would need to attach the tie-downs to the camper is the part # TDHP.
view full answer... - Will Brophy Camper Hold Downs # HSSF Fit 2013 Ford F-150 PickupThe Brophy Camper Hold Downs, part # HSSF, are intended to fit a broad range of trucks including the 2013 Ford F-150. Exceptions to the fit are step-side beds, some double-wall beds and certain dually and import trucks. Also, bed liners may require trimming for installation. As long as your truck has a downward lip on the underside of the bed rail these hold downs will work. Please refer to the linked video which shows the installation process. This will help you confirm compatibility...
view full answer... - Brophy Camper Tie Downs that Can be Used with 2021 Ford F-150 with Aluminum Truck BedYes, we've checked with Brophy in the past and their camper tie downs part # HSSF are perfectly compatible with the aluminum bed of the 2021 Ford F-150. Turnbuckle kit you'd also want the part # TDHP.
view full answer... - Will Brophy Camper Hold Downs # HSSF Fit a 2011 Chevrolet Silverado Extended Cab, Long BedThe Brophy Camper Hold Downs, part # HSSF, will fit your 2011 Chevrolet Silverado extended cab, long bed as long as you do not have a slide-in bed liner. They will work with a spray-in bed liner. There is not a weight capacity rating for these hold downs and they are designed to work for any camper that is a correct fit for your vehicle. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. If you are wanting to use a stake pocket...
view full answer... - Camper Tie Down Recommendation for a 1994 GMC K1500 and 1976 Six Pac CamperI recommend using the same tie downs that you have referenced, # HSSF, for your 1994 GMC K1500. Provided your truck is not a dually and does not have a double wall bed, these tie downs will fit. They will support a camper that is an appropriate size for your truck. I also recommend using the hardware package # TDHP with the tie downs. I have included some pictures showing how the tie downs install. Using tie downs like this, which are the best option for you, would require trimming the...
view full answer...
- Brophy Camper Tie Down Recommendation for Truck with Aluminum Truck BedYes, Brophy has recommended the # HSSF for trucks with aluminum beds like yours so this would be a great option. For a hardware kit you would need the # TDHP.
view full answer... - Camper Tie Down Recommendations for a Chevy Silverado 2500There are several camper tie downs that you could use depending on how you want them to mount. First, the Camper Tie Downs, # TDSF, that you have referenced will fit your truck and fit in the truck stake pockets. If you do not want something in the stake pockets, then I recommend going with Camper Hold Down, # HSSF, which wrap around the bed side. For either kit, use Camper Tie Down Hardware Package, # TDHP.
view full answer... - Will Camper Hold Down, # HSSF, Fit a 2011 Ford F-250 with Spray-In BedlinerI went out to the warehouse and pulled a Camper Hold Down, # HSSF, to measure so you could compare the measurements to your truck to determine fit. The hold down will go around a bed rail that is no wider than 5 inches. The top part of the hold down is 6 inches wide while the bottom, more narrow part is 3 inches wide. The top 2 bolt holes are 3-5/8 inches apart on center. It has an overall height of 11-3/8 inches. A spray-in bedliner will be fine. Slide in bedliners would have to be trimmed...
view full answer...
- Frame Mounted Camper Tie Downs that Fit 2021 GMC Sierra 3500The Brophy T-Bolt Replacements part # BR2007 that you referenced are 6 inches long and would be same size as what came with your # HSSF. The best option we would be the Torklift frame tie downs part numbers # TL44FR and # TLC3221 for if you have a single rear wheel setup or the part numbers # TL44FR and # TL84FR for if you have a dually setup.
view full answer... - Best Fitting Brophy Camper Tie-Downs For 2004 GMC Sierra 2500 HD Duramax I spoke with Brophy and they stated the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSSF would be the best fit for your 2004 GMC Sierra 2500HD Duramax. You'll also want some turnbuckles, which I recommend the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000lbs - Qty 4 Item # TDHP.
view full answer... - If Brophy Camper Tie Downs Bend Can they be Bent BackIf the bend wasn't enough to affect the integrity of the tie downs then yes you could bend them back. So basically bend them back and as long as you don't see any metal creasing, paint flaking, or any other obvious signs of stress you'd be fine. If they are stressed to the point they need replacing these have a 1 year warranty.
view full answer... - Difference Between The Brophy Tie Downs TDSF and HSSF For a Camper Towed By a 2000 Ford F-150I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where as part # HSSF mounts over the sidewall of the truck bed. Also, part # HSSF is ok to use in trucks with spray-in bed liners. If your truck has a drop-in bed liner, it...
view full answer... - Availability of Chrome Plated Camper Hold Down ClampsYes, we can supply Camper Hold Down Clamp - Chrome Plated, # HSCP. These clamps are the chrome plated version of the HSSF hold downs.
view full answer... - Camper Tie Down Recommendation for a 1997 Ford F-350 DuallyYes, the Camper Hold Downs part # HSSF will work on your 1997 Ford F350. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your vehicle. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
view full answer... - Can I Use the Brophy Clamp On Camper Tie Downs on 2019 Ram 2500 With Double Walled BedAs long as the double wall still allows for the clamp on the underside of your bed rail, the Brophy Tie-Downs # HSSF will work on your 2019 Ram 2500. The brace on the bottom is adjustable so it will account for the additional wall on the inside of the bed. If you don't have the lip under the rail then you may want to instead consider the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # TDSF since they won't utilize that lip or the inside of...
view full answer...
- Can Brophy Camper Tie Down # HSSF be Used with Camper that is Longer than 8 FeetYou are correct the versions of the Brophy camper tie downs that attach to the truck bed rail pockets are limited to 8 foot long campers but the clamp on style like part # HSSF can be used with longer campers like what you have and will work great with your 2003 Chevy Silverado 2500HD.
view full answer... - Camper Tie Down Recommendation for 2015 Chevy Silverado 3500 with Wheel to Wheel Nerf BarsSince you have wheel to wheel step nerf bars the only solution for camper tie downs would be a Brophy kit like the part # HSSF which attaches to the stake pockets. The Torklift kits would interfere. Then for a hardware kit to attach the camper to the truck bed you would also need the part # TDHP.
view full answer... - Will Brophy Camper Tie Downs Fit a 2009 Ford F-150 STX and Not Interfere with the CamperIt is likely the hardware that sticks out into the bed that is causing some fit issues with the Brophy tie downs # HSSF. But if you have 8 inches of clearance on each side with your 2009 Ford F-150 STX then I don't see there being a problem. On the off chance that there is an issue part of the T-bolt sticking into the bed could be trimmed away. With these tie downs we also recommend hardware package # TDHP to secure the camper to the tie downs. I have linked a video featuring these products...
view full answer... - Recommended Camper Tie Downs for a 2005 Ford F-250 4x4 Regular Cab 8 Foot Bed DieselNo, the stake pocket mount tie downs, # TDSF, are only good for campers up to 8 feet long. You would need camper tie downs # HSSF instead for your 2005 Ford F-250. I have included a link to a video review and the instructions to the right. I also recommend camper tie down hardware package # TDHP. You may also be able to install frame mount tie downs which would be ideal. I have included a link to the custom fit frame mount tie downs for the 2005 Ford F-250. You will need to use the drop...
view full answer... - Will Brophy Camper Tie Downs HSSF Fit 2001 Chevy SilveradoYes the Brophy camper tie downs part # HSSF that you referenced do fit your 2001 Chevy Silverado. We had the chance to install these on a similar Chevy truck and they fit well. Check out the review video and install pictures I attached as well. You'll need the hardware kit # TDHP as well to attach them to your camper.
view full answer...
- Brophy Camper Tie Downs that Fit 2017 Chevy Silverado 1500For your 2017 Chevy Silverado 1500 the part # HSSF would be the correct camper tie downs. We have confirmed with Brophy that these work on the newer Silverados. For a hardware kit you'd then need the part # TDHP.
view full answer... - Brophy Camper Tie Down Setup for 2002 Toyota TundraFor tie-downs that will work in your 2002 Toyota Tundra with a 6-1/2 foot bed you will want the Brophy Clamp On Camper Tie-Downs # HSSF. These tie-downs are compatible with the turnbuckles # TDHP that you'd need to complete your camper tie down setup for your truck.
view full answer...
- Camper Tie Downs for 2007 Dodge Ram 3500 Big HornFor camper tie downs for your 2007 Dodge Ram 3500 I recommend the Brophy tie downs, # HSSF, with hardware package # TDHP. I have included a link to the installation details and a link to a video review. The best option would be frame mounted tie downs. To select the right ones though you will use the link to the right and then select the configuration of your truck from the drop down menu.
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Surface Scratches
Notes: Parts are scratched up, seems to be some signs of instalation, otherwise fine.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video Edited:
Zack K
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Rachael H
Updated by:
Amanda M
Updated by:
Manda E
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ed B.
5/22/2020
No problems. Would buy again. Very easy to take on and off the truck.