Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
(149 reviews)
Price: $220.85
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
Item # HSAB
Retail:$273.55
Our Price: $220.85
You Save: $52.70
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
- All Info
- Reviews (149)
- Q & A (0)
- Photos
- Used (2)
Brophy Truck Camper Tie Downs - HSAB
- Bed-Mounted
- Front and Rear Tie-Downs
- Brophy
- Powder Coated Steel
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Makes it easier to attach your turnbuckles (sold separately)
- Angled bracket provides more clearance between tie-downs and truck fenders than standard tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder-coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
Angled Bracket Makes for Easy Hookup
These particular tie-downs are designed with an angled bracket that gives you more clearance between the tie-down anchor points and your truck's fenders. This extra space makes it much easier to attach and tighten your turnbuckles (sold separately) when you're securing your camper.
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they will make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSAB CR Brophy Heavy-Duty Tie Downs for Slide In Truck Camper - Black Powder Coated Steel - Camper Hold Down - Angled Design - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4 - HSAB
Average Customer Rating: 4.4 out of 5 stars (149 Customer Reviews)
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.by: Leo04/03/2024
The Brophy tie-downs work just as advertised. I am a recreational user of my camper - not full-time or long trips, and have had no issues with them. The only challenge is backing my truck under the camper with the brackets mounted - like threading a needle, because the leg stands barely clear the brackets. I have a 2-16 F-250 and a Northstar 650 and their is not enough clearance in the bed to add the brackets after the camper is in position. Again, this is not a problem with the brackets, its a camper leg/stand and bed width issue.
by: Steve03/22/2024
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
by: Ty05/09/2024
Works great with the bike rack. Looks nice, easy installation. I'm glad I bought it. I would recommend.
by: Mike G06/14/2024
Working great good product,fast shipping
by: Mickey 05/10/2024
Kimberly was friendly, knowledgeable and really helped me pick out the right tie down. Would have no problem ordering from her agai.
by: Gregory 06/12/2024
simple install, well made . Using on my pop up truck camper
by: Jeff R06/27/2014
I am so happy with your Angled Hold Downs. Especially how they clamp to the bed of my truck and I didn't have to drill any holes. They do a great job and I have no worries when the girls take it camping for the weekend... I do worry about the safety of my pickup though. hahaha
by: Teri04/04/2018
As always my order arrived early. The box was not in great shape but nothing was lost out the holes. Poor delivery guy could barely get it to the porch. I was surprised at how heavy they are. It took me about half an hour to get them installed. I have a 1995 Dodge Ram 2500. The shape of the inside of the truck was a pain to work around. I couldn't set the front tie downs as far forward as I would have liked, but it will work. Haven't got the camper yet but I'm sure they will be perfect. I have seen these on many pickups here in western Colorado. The installation video made my choice easy ...NO HOLES TO DRILL.
by: James07/09/2023
After installing the tie downs per the instructions I proceeded to connect a turnbuckle with chains and upon tightening it down the Brophy tie downs turned towards the camper connection point. In other words they would not tighten up.
Jenny N.
7/12/2023
I wanted to ask if you can send a picture of how the tie downs are installed. I want to help to make sure that you can use the tie downs.
by: Devin05/24/2023
1) Poor quality product: The nuts for the bed clamp can't even be tightened all the way due to poor design, friction with the body of the clamp.
2) The neoprene pads referenced in the instructions weren't included in my package.
3) Fast shipping time and good communication from eTrailer
Jenny N.
5/26/2023
I know that these tie downs are considered to be more universal. The external bed rail cannot be more than 5.5 inches wide and there needs to be at least 2 inches of space under the lips of the rail. Would you be able to send a picture of how yours is installed? Just be sure that you do not have a double- wall or step side bed. I will have Customer Service reach out to you about the missing neoprene pads. We will have them sent out.
by: Matthew06/20/2023
Items in the box were not secure and clearly banged around during shipping. Box was torn in a number of places and resulted losing the T-bolts. I discovered Friday evening, and called etrailer the next morning. Person indicated you don't ship on Saturday but would go out Monday morning and she'd mark it priority. She indicated I could expect delivery on Tuesday or Wednesday. I received notice of the delivery on Friday as I was on the way to Canada fishing for a week. Needless to say I got creative and used pieces of 2x2 instead to leverage brackets to truck bed side. When I got home I looked at the T-bolts and think I will stick with the wood. There is no coating on the T-bolts so would likely damage the bed lining.
by: Jeremy03/23/2023
The product itself will do the job, after I spend some precious time to clean it up. I was amazed that all the individual parts and hardware made it, since the box was totally destroyed. All of the powder coating of the plates are badly scratched, down to raw metal, just from banging and sliding against each other. A couple corners of the thinner metal flanges are bent, too.
This package looked like it was drop-kicked down a flight of cement stairs in a fit of rage.
Unfortunately, I need this to work ASAP, and will repair and modify to suit my needs. Never mind how I feel, or the principal of the matter, but I feel some refund or discount is in order.
I’m sure it left Brophy’s manufacturing facility looking shiny and straight.
I’m sure they could improve their packaging.
I’m certainly sure that etrailer could indentify this obvious issue and take some steps of their own to maintain a happy clientele, like simply throwing it into another heavy box.
Jenny N.
3/24/2023
It certainly sounds like the tie downs did have a rough ride in shipping. Customer Service will reach out to you.
by: Walt 07/26/2023
Your service was great. The products I ordered arrived ahead of schedule. Also the tie downs look to be of great quality--very heavy, I can't wait to try them this weekend. The shipping box took a real beating. The packaging tape worked well at holding the box together. The only suggestion I have is that you might consider using a stronger cardboard box or reinforcing it somehow to withstand the handling of your products while being shipped.
by: Excellent 05/02/2019
These tie downs worked great for my Toyota Tundra. I was securing a light weight camper.
by: Loretta 08/02/2023
the clamp ons didn't allow for the plastic cover over the truck bed rails to remain in place on the 2022 Nissan Frontier KC with 6' 1" box.
by: H edward05/15/2016
I have a Sunlight, 8 foot, slide-in truck camper that I now carry in a 2015 Dodge 1500 Quad Cab. I use the Brophy angled tie downs for the front of the camper and Happijac bumper tie down for the rear. It took some tweeking and the right combination of hardware to connect the Brophy tie down to the camper but in the end it all came together and I'm very happy with the results. They are relatively easy to install and make a solid, safe tie down system. I would recommend them to a friend.
by: Bob T.08/30/2013
I installed the angled camper hold-downs today and it took me all of fifteen minutes. I was impressed at how heavy-duty they are. I am very pleased with the product.
Bob T.
8/30/2014
Well, its been a year since I installed the hold-downs on my truck and I am still very satisfied with them. They have been in use several times and in fact I am leaving next week on a two week hunting trip to Colorado.
by: Paul V.05/06/2020
Product was easy to install, worked great. It held on some pretty knarly roads.
etrailer is a great company to work with as well.
by: Wade02/03/2018
Really impressed with the product and installation was really simple good quality product I would recommend it to anyone
by: Gerry06/28/2020
Excellent product - super fast shipping - perfect fit for my 2019 Ram Turbo diesel 3/4 ton 4x4. Plenty of clearance.
by: Andrew 05/10/2023
The ease of installation and the robust product makes this a great go to for truck camping.
by: Michael11/14/2023
The service was great and the staff was more than willing to help with any issues the only reason I gave it four stars was that the website was misleading
by: Erik 12/05/2023
Everything was correct to my order standard delivery was very fast
by: Gene03/17/2023
Good quality but to wide off bed doesn’t clear camper jacks
25
149
Show More Reviews
See what our Experts say about this Brophy Truck Camper Tie Downs
- Will Brophy Clamp On Camper Tie-Downs Be Compatible With A 2017 Ford F-250 The Brophy Clamp On Camper Tie-Downs # HSAB are a universal fit designed for full-size, non-dually trucks with a few other restrictions but you can still measure to see if they would be a fit for your F-250 based on the dimensions displayed below. We do list the Brophy Clamp On Camper Tie-Downs # HSWB as a compatible fit for a 2017 Ford F-250 so you could switch to those instead. We also carry the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to complete your setup...
view full answer...
- Recommended Camper Tie-Downs For A 2023 Ford F-350 With Deployable Running Boards Unfortunately the deployable running boards are going to prevent the installation of TorkLift camper tie-downs so the only other option would be Brophy Clamp On Camper Tie-Downs # HSAB. These tie-downs clamp to the inner lip of the bedrails and angle down along the body of the bed. Because of this you will want to do a bit of measuring beforehand to ensure that the tie-down won't touch the bed and scratch your paint. I've attached a diagram below so that you can take some measurements....
view full answer...
- Will Brophy Clamp-On Tie-Downs Accommodate A 2,400lb Truck Bed Camper While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs # HSAB there is a 3,000lb capacity for the turnbuckles # TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need to meet the following criteria: External bed rail width cannot exceed 5-1/2" Requires at least 2" of space beneath lip of bed rail Not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds
view full answer... - Will The Brophy Clamp On Camper Tie-Downs Fit A 2015 GMC Sierra 2500HD With An 8' BedThe Brophy Clamp On Camper Tie-Downs # HSAB are typically used for much older model trucks but can still work if your 2015 GMC Sierra 2500 meets the following criteria: External bed rail width cannot exceed 5-1/2" Requires at least 2" of space beneath lip of bed rail Not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds You'll also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to complete your setup and properly lock...
view full answer... - Recommended Clamp On Bed Mounted Camper Tie Downs for a 2001 Dodge Ram PickupFor a set of clamp on camper tie downs that have been confirmed to fit your 2001 Dodge Ram Pickup I recommend using the Brophy Clamp On Camper Tie-Downs part # HSAB. I have attached a photo for you on a truck from the same generation to show fit. The Brophy Clamp On Camper Tie-Downs part # HSSF should also fit but we have not yet tested this. It looks like you may need the angled lip to clear the bed sides so I do recommend using part # HSAB. The angled lip is the only difference between...
view full answer...
- Will Brophy Camper Tie-Downs Work In A 2011 Ford F-150 The Brophy Slide In Camper Tie-Downs # HSAB might be a fit for your 2011 Ford F-150 but you'll need to do a bit of measuring first and you'll likely need to trim out holes where the tie-downs would sit. You'll want to verify that # HSAB brackets can clear the sides of the bed based on the dimensions I've pictured below. You'll need a minimum of 2" between the sidewall and lip of bed rail in order for these to mount properly. The liner can be trimmed out just enough to for the brackets to...
view full answer...
- Difference Between The Brophy Camper Tie-Downs HSAB And HSSF The Brophy # HSAB and # HSSF are essentially the same thing with the exception that the # HSAB has a small bend in it to make connecting to your turnbuckles easier. If you're still needing turnbuckles you can use part # TDHP.
view full answer... - Lance Truck Bed Camper Tie-Down Recommendation for a 2011 Chevy Silverado 2500Since you're going with occasional use of your Lance camper I recommend the following parts for a tie-down system on your 2011 Chevy Silverado 2500: - Brophy Clamp On Camper Tie-Downs # HSAB - Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP Happy camping!
view full answer... - Are the Brophy Clamp On Camper Tie-Downs Available in a Set of 2The Brophy Clamp On Camper Tie-Downs # HSAB are only available as a set of 4 (front and rear) tie-downs.
view full answer... - Could Brophy Camper Tie Downs be Used on 2016 Ram 3500The Brophy camper tie downs part # HSAB can be used on your 2016 Ram 1500 since they are a universal design. In general the frame mounted tie downs are a more solid choice over ones like these that attach just to the truck bed rails but the # HSAB would fit and work well. You'll also need hardware to secure the camper to the tie downs as well with the # TDHP.
view full answer... - Is Brophy Clamp On Camper Tie-Downs Item # HSAB Compatible With A Ford F-150 RaptorI contacted Brophy and determined that Item # HSAB is compatible with your 2012 Ford F-150 Raptor as long as the bed rail does not exceed a width of 5-1/2". I also recommend the Brophy Basic Turnbuckles Item # TDHP to go with the tie downs to secure the camper down. If your rails are wider than 5-1/2" you would have to go with a frame mounted tie down. I have included a link to the page of the 3 different options for the frame mounted tie downs. Make sure, if you must go this route, to...
view full answer... - Recommended Brophy Camper Tie-Downs for 2005 Toyota Tundra For your 2005 Toyota Tundra I recommend the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF. These particular tie-downs will mount right to the truck's stake pockets instead of having to clamp them around the bed rails like the other options for a bit of an easier installation and a more secure attachment. Just note that some drilling will be required. We had a customer use these with his 2005 Toyota Tundra and reported that they worked perfectly so we know that they fit the stake...
view full answer... - Brophy camper Tie Downs Recommendation for a 2003 Chevy Silverado 2500HDThe Angled Hold-Downs for Truck Bed Campers # HSAB should work very well for your 2003 Chevy Silverado 2500. We had a customer leave us a review that said they were very easy to install and reinstall and that it only took a few minutes, so I think they would work well for you since you said you needed the easiest to install and remove. The # TDHP tie down hardware will also be needed to attach the camper to the tie down bracket.
view full answer... - Dimensions for Brophy Tie Down Kit part # HSAB and Fit for 2014 Ram 2500I attached a picture that has basically all of the dimensions you'd ever want for the Brophy Tie Down Kit part # HSAB. These will fit your 2014 Ram 2500. If you check out the install video I attached you'll see the kit installed on a similar full-size Ram as yours as well.
view full answer...
- Would the Brophy HSAB Tie Downs Fit a 2015 GMC 3500 Long Bed DuallyThe Angled Hold-Downs for Truck Bed Campers # HSAB that you referenced are universal in design so they can fit nearly all truck beds including your 2015 GMC 3500 with a long bed. They don't fit some dually beds. The fit issue with the dually trucks is that the bed flairs out at the rear of it for some trucks and the hold downs would interfere. I looked up a picture of the bed of your truck and where the stake pocket would be your truck bed is standard width so these will work. For some...
view full answer...
- Will the Brophy Clamp On Camper Tie Downs Be Used on a 2018 Ram 2500 W/ A Velcro Tonneau Cover? As long as your 2018 Ram 2500 has access to the underside of the bed rails and a minimum of 2" between the lip of the bed rail and side wall the Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB will fit. You're also going to need a set of turnbuckles # TDHP to secure your camper to the tie-downs.
view full answer...
- Will Brophy Camper Tie-Downs Fit a 2021 Chevy Silverado 2500From what you're saying it sounds like the Brophy Clamp On Camper Tie-Downs # HSAB will work on your 2021 Chevy Silverado 2500 but I'm adding a dimensional photo for you to reference and check with on your end. These are a universal application so each fit is slightly different. Be sure to pick up the Brophy Basic Turnbuckles # TDHP to secure your camper to the tie-downs. Attached are some videos for you to check out as well.
view full answer...
- Recommended Bed Tie Downs and Turnbuckles for a 2015 Ram 2500Yes, you can use the Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB with your 2015 Ram 2500. These tie downs will install on your truck by clamping onto the side rails in your truck bed and will require no drilling. You're also going to need a set of turnbuckles to secure the camper to the tie downs. I recommend going with the TorkLift FastGun Turnbuckles for Bed-Mounted Camper Tie-Downs # TLS9521. These turnbuckles are super easy to use and will reach 14" to 21 1/2".
view full answer... - Camper Hold Down Recommendation for a 2003 Ford F-350The Angled Hold-Downs for Truck Bed Campers # HSAB would work well on your 2003 Ford F-350 for securing your camper to the bed of the truck. The only Ford trucks that we have fit exclusions for with these are the 2004-2008 Ford F-150. You will also want the part # TDHP.
view full answer... - Brophy Clamp On Camper Tie-Downs 2015 Ford F-250 Super DutyYes, the Brophy Clamp On Camper Tie-Downs, # HSAB, will fit your 2015 Ford F-250 Super Duty as long as it is not a dually. Your external bed rail width cannot exceed 5-1/2", requires at least 2" of space beneath lip of bed rail and not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds. You will also need Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4, # TDHP. Please see the link to product review and installation...
view full answer... - Do Brophy Camper Tie Downs HSAB Fit 2007 Ford F-150 Short BedThe Brophy Camper Tie Downs part # HSAB that you referenced will fit and work well on your 2007 Ford F-150 6-1/2 foot bed. We had a customer with your exact truck leave a review for these and they said they worked great. The hardware kit you'll also need is the part # TDHP.
view full answer...
- Will the Brophy Clamp On Camper Tie-Downs Fit a 2020 Toyota TundraThe Brophy Clamp On Camper Tie-Downs part # HSAB are universal tie-downs used to secure a truck bed camper to a truck bed. They are universal because the manufacturer does not do any testing on specific year, make, and models. That said, we have heard back from customers using these tie-downs on earlier model Toyota Tundras so they should work on the 2020 as well. In order to complete your setup you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP.
view full answer... - Are Brophy Tie-Downs OK to Use on 2015 Ford F-150Yes, your 2015 Ford F-150 with a light truck camper is absolutely suitable for use with the Brophy Clamp On Camper Tie-Downs # HSAB. There won't be any issue with your truck's bed and these tie-downs, and the only other thing you'll need are turnbuckles, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs # TDHP.
view full answer... - Max Weight of Camper Compatible with Brophy Clamp on Tie-DownsThe Brophy Clamp On Camper Tie-Downs # HSAB do not have a max weight capacity rating. So you will be restricted only by the payload of your truck. You may also be interested in the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4 # TDHP.
view full answer...
Do you have a question about this Truck Camper Tie Down?
Used Items Available
Condition: Installed
Notes: some light scratches and installation marks
Condition: Surface Scratches
Notes: Item has several scratches, scrapes and paint chips. Otherwise new and unused.
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Rachelle B
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Amanda M
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
April
7/11/2014
Haha