Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $122.47
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Our Price: $122.47
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Randy05/25/2023
Did not realize they are for a 8’ maximum camper. Mine is 9’6”
Randy E.
5/27/2024
They did not fit my 2021 Ram Stake pockets . Hope to get rid of them sometime in the future
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: Chad07/26/2023
Works perfect for what I needed
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
25
310
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Which Brophy Camper Tie Downs Fit 2011 Chevy Silverado Long BedI do have a solution for you, but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not designed to fit on 2011 and newer pickups, so they will not work for your 2011 Silverado. The Brophy Clamp On Camper Tie-Downs # HSSF would be the correct camper tie downs for your truck. You'd also need the hardware kit part # TDHP as well and you'd be set.
view full answer... - How to Determine Fitment of the Brophy Camper Tie Downs in a 1968 Ford F-250 Camper SpecialThe The Brophy Camper Tie Downs # TDSF, are a universal fit kit intended to fit as many trucks as possible. While there is nothing to say that it for sure fits, looking at your pictures it seems likely that it will work for your 1968 Ford F-250 Camper Special. However, this would not be without modification as the Brophy Camper Tie Downs, # TDSF requires holes to be drilled through the pocket and tie-down for installation. I have included a dimensional picture of the Brophy Camper Tie...
view full answer...
- Recommended Tie-Downs for 2019 Ram 2500 Short Bed with Running Boards/StepsWe do have camper tie-downs that will fit on your 2019 Ram 2500 but since you have the running boards none of the TorkLift Tie-Downs will fit. You could use parts # TLD2140 and # TLD3113 if you removed the running boards (or steps) but since I doubt that's something you want to do we need to look into alternatives. One of the most popular options on our site is the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF which you would use with the Turnbuckles # TDHP. These drop into your...
view full answer...
- Camper Tie-Downs for a 2013 Ford F-150I personally like the TorkLift Custom Frame-Mounted tie-downs like parts # TLF2014, and # TLF3005 which fit a 2013 Ford F-150 with the 6-1/2' bed and no board or step under the bed. There are variations of this type of kit depending on the configuration for your pickup and they provide you a clean look when you don't have your camper in the bed. For a more cost-effective option you can use a Brophy stake pocket mount like part # TDSF but you need to make sure that the 5-1/2" high x 1-7/8"...
view full answer... - What Camper Tie Downs are Needed on a 1991 Ford F-250 with 10' Truck Bed CamperI have a solution for you but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are designed to be used with truck bed campers up to 8' in length so they would not work for your 10' camper. You will want to use the Brophy Clamp On Camper Tie-Downs # HSSF which don't have a length and weight limit. You will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP for securing the camper to the tie downs. Something to note is that the # HSSF is not going to work...
view full answer... - Brophy Camper Tie Downs 2006 Toyota TundraThe Brophy Camper Tie Downs are not custom fitted to vehicles the same as other tie down options. For your 2006 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. They will clamp into the bed rail of your truck and provide an attachment point for your camper. The same tie down but with a polished zink finish is # HSBP. Each comes with Neoprene pads to protect your truck's paint. Please see the attached photo with the...
view full answer...
- Do Brophy Camper Tie Downs TDSF Fit 2004 Ford F-350 DuallyYes, the Brophy camper tie downs part # TDSF are a fit for your 2004 Ford F-350 dually.
view full answer... - Will Stake pocket Mount Camper Tie Downs Fit a 2014 Chevy SilveradoThere are no stake pocket camper tie downs that we carry that will fit your 2014 Chevy Silverado. You would need to use # HSSF with hardware package # TDHP or you could use custom, frame-mounted tie downs. The custom tie downs are going to be the best option since they attach to the truck frame and not just the bed. To view the custom options I would need to know if the truck is a 1500, 2500, or 3500.
view full answer... - What are the Rating Requirements for the Brophy Stake Pocket Tie Downs TDSFThe Brophy tie downs part # TDSF that you referenced are rated for use with any camper that is properly sized for the truck it will be installed in. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are mounted inside the bed. Also, Brophy # HSSF will work in trucks with spray-in bed liners. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. Since...
view full answer... - How to Tell if Brophy Stake Pocket Mounts Will Fit 2021 Ram 2500The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are a universal application that fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction. Because of this we don't have them in our fitguide system, but I've attached a photo showing the dimensions of the stake pockets so that you can compare them to the dimensions of your 2021 Ram 2500 to ensure they will work for your application.
view full answer...
- Will the Brophy Stake Pocket Mounted Camper Tie Downs Fit a 2007 Dodge Ram SRW 3500The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF work with most full-size, non-dually pickup trucks with straight fenders and single-wall construction, model years up to and including 2010. I have included a couple diagrams you can take a look at that include measurements so you can verify they will work with your 2007 Dodge Ram SRW 3500, as well as a video that touches on installation. These will also work with truck bed campers with an overall length up to 8'. You will also need...
view full answer...
- Camper Tie-Down Options for a 2022 Ford F-150 That Has Wheel to Wheel Running BoardsBecause you have running boards that run from wheel to wheel, there is not a set of custom tie-downs that fit your 2022 Ford F-150. You will have to use a set of universal tie-downs. I have listed universal tie-downs below, there are two different mount styles. Clamp-on - Brophy Clamp On Camper Tie-Downs # HSAB Stake Pocket Mount - Brophy Stake Pocket Mounted Camper Tie Downs # TDSF You will also need turnbuckles to secure the camper to the tie-downs. - Brophy Basic Turnbuckles w/ Hardware...
view full answer... - Will TDSF Camper Tie Downs Fit 1995 Dodge Ram 2500 Long BedYes, the stake pocket camper tie downs, # TDSF, will work on the 1995 Dodge Ram 2500, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is longer...
view full answer... - Slide In Camper Tie Down Options for 2002 Chevy 2500 HD Pickup TruckThe manufacturers supplied data for the Draw-Tite # 41544 hitch does not show any information regarding its use with a camper tie down system. Some tie downs for slide-in campers attach directly to a specialized truck hitch, but not in this case. Other tie downs attach to the truck frame, to the trucks factory installed hitch, or stake pockets. For your 2005 Chevy 2500 HD with aftermarket hitch, Extended Cab, and 8' bed you can use the Brophy # TDSF Stake Pocket Camper Tie Downs. Kit...
view full answer... - Camper and Tie-Down Recommendation for Ford F250 Super Duty with 6-1/2 Ft BedI spoke with one of our local RV dealers here in Saint Louis and he said that they offer a 6.8 and 8.6 Ft truck camper that would work with your truck. You will need to drop or completely remove your tailgate before hauling this type of camper. When choosing a camper you will also want to make sure that you do not exceed the weight capacity of your truck. When it comes to tie-downs, I personally recommend going with our custom fit TorkLift camper tie-downs like the # TLF2012 and # TLF3006....
view full answer... - Camper Tie Downs for a 2018 Ram 2500We have Brophy Stake Pocket Mounted Camper Tie Downs # TDSF but they are only for certain trucks up to the 2010 model year. You may be able to use Brophy Clamp On Camper Tie-Downs # HSAB though. They will fit if the external bed rail width is less than 5-1/2 inches and they require 2 inches of space beneath the lip of the bed rail. Use these with turnbuckle kit # TDHP. The other option is custom frame mounted tie downs. Which ones will fit depends on the configuration of the truck. I have...
view full answer... - Brophy Stake Pocket Mounted Camper Tie Downs QuantityThe Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not available in a quantity of two; they are only sold as a quantity of four.
view full answer... - Fitment of Brophy Stake Pocket Mounted Camper Tie Downs 2020 Toyota TacomaThe Brophy Stake Pocket Mounted Camper Tie Downs, # TDSF will work with your 2020 Toyota Tacoma. This comes with 3 removable spacers to allow a tight fit in your stake pockets. I recommend the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs, # TDHP. This turnbuckle will expand from 7-5/8 inches to 20 inches and with the included chain and S hook can reach up to 19-3/4 inches.
view full answer... - Camper Stake Pocket Tie Downs for 2003 Dodge 2500 2WDYes, the stake pocket camper tie downs, # TDSF, will work on the 2003 Dodge Ram 2500, as long as the overall length of the camper you are using them with is 6.5 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is...
view full answer... - Stake Pocket Camper Tie Downs for a 1991 Chevrolet Pickup TruckYes, the Brophy Camper Tie Downs, # TDSF, will work for your 1991 Chevrolet Pickup. Keep in mind, these tie downs are for campers up to 8ft only. We recommend using the camper tie down hardware kit, # TDHP, with these tie downs. If your camper is longer than 8ft, then I recommend using the Brophy Clamp On Tie Downs, # HSSF. This kit clamps around the top of the bed rail and requires a minimum of 2 inches underneath the lip of the bed rail. If you have a bed liner, it may need to be modified...
view full answer... - Will Brophy Stake Pocket Camper Tie Downs # TDSF Fit 2008 Chevrolet Silverado Crew CabThe Brophy Stake Pocket Camper Tie Downs, part # TDSF, will fit most full-size pickups with straight fenders and single-wall construction. These will install permanently in the stake tubes. Installation requires drilling to secure each tie down to the top of the bed rail (with included hardware). The Brophy # HSSF Camper Hold Down does not require drilling for installation. However, the HSSF requires a minimum of 2-inches underneath the lip of the bed rail for installation of the supporting...
view full answer...
- Using Frame Mounted Camper Tie Downs with Wheel to Wheel Running Board on a 2017 Nissan Titan XDI do have both front and rear camper tie downs that are a confirmed fit for your 2017 Nissan Titan XD. The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLN2410 is for the front and the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLN3404 is for the rear. However, you will need to remove your wheel to wheel running boards in order to install the rear frame mounted camper tie downs. None of TorkLift's frame mounted camper tie downs are designed to be used with wheel to...
view full answer... - Recommended Truck Bed Camper Tie Downs for 2004 Ford F150According to my contact at Brophy, the # TDSF stake pocket tie-downs will work with your truck, but your camper would need to be 8 feet long or shorter. You would also need the Tie-Down Hardware package, part # TDHP which includes the turnbuckles and chains. Their # HSSF system will not work with the 2004-2008 F150 Trucks. If your camper is longer than 8 feed, Torklift offers some tie down solution, but I would need more information about your truck. I would need to know: Does truck have...
view full answer... - Truck Bed Tie Downs for a 1995 Ford F-150 and Light Weight 8-1/2 Foot CamperFor your 1995 Ford F-150 and camper, I recommend the Camper Hold Downs, # HSSF. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. There is no weight capacity rating on the hold downs and the will work for any camper size that is properly sized for your vehicle. I also recommend the Camper Tie Down Hardware Package, # TDHP, which has a weight capacity of 3,000 pounds.
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.