This single-arm stand has 3 indicators that let you true your bike's rims and disc brake rotor. The indicator adjusts along the arm to accommodate tires up to 29". Mount to your Feedback Sports repair stand or to your work bench.
Features:
Specs:
This truing stand lets you inspect your bike's wheels and disc brake rotors for imperfections. It has indicators to test your rims for balance and shape and test your rotors for bending or warping. The stand has a rotating, pivoting arm that gives you unrestricted work access to your wheel. It works with wheels up to 29" in diameter, and it uses your bike's existing 9-mm quick-release skewer to secure the wheel to the arm. You can mount it to your Feedback Sports work stand or use the included plate to mount the arm on your work bench.
The stand includes 3 truing indicators that help you detect flaws in your bike's wheel or disc brake rotor. The indicator bracket adjusts along the arm using a spinner knob.
The lateral indicator helps detect an unbalanced wheel. Simply screw the head at the end of the indicator bracket until the spring-loaded tip touches the wheel's rim. Any movement of the tip as the wheel is spinning indicates an imbalance.
The axial indicator lets you check the shape of the wheel. Remove your tire from the rim, place the tip against the underside of the rim, and spin the wheel. Any resistance detected indicates you have a damaged or improperly shaped wheel.
The rotor indicator lets you check your disc brake rotor for bending or warping. You can make the slot for the rotor wider or narrower by simply screwing the sides up against the rotor so it fits perfectly, then spin the rotor and watch for resistance.
The adjustable holding arm provides unrestricted access to your wheel. The arm rotates 360 degrees around the cylinder and pivots vertically to let you work at nearly any angle. There is a knob at the bottom of the arm that lets you easily tighten and loosen the grip on the arm.
You can detach the arm from the steel base and attach it to your wash and work stand. Use the knob at the bottom of the arm to loosen the tension on the mounting cylinder and slide it off. Then use the knob to tighten it to the exposed frame above the clamp head of your work stand.
You can also use the included plate to mount the arm to your work bench in your basement or garage.
Use your bike's standard 9-mm quick-release skewer to mount your wheel to the stand.
An adapter for 10-mm, 12-mm, 15-mm, and 20-mm thru-axles is also included to accommodate different size wheels. It accommodates hub spacing up to 157-mm Super Boost.
You can remove the truing stand from its steel base and place it into the exposed frame above the clamp head on all the Feedback Sports work stands.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is Jeff at Etrailer.com. Today we're going to take a look at the Feedback Sports Pro truing stand for bike wheels. Now this is a nice single arm stand, which will help you true your bike's rims and disc brake rotor. You can see its rotating and pivoting arm provides unrestricted access to the wheel. Basically, if you loosen this, you can even rotate it this way or that way. And then once you get it in position, just line it up and then go ahead and tighten it down.Now it does use your bike's existing nine millimeter quick-release skewer to secure the wheel up here to this arm.
But it does come with this adapter here. This adapter is for 10 millimeter, 12 millimeter, 15 millimeter and 20 millimeter thru-axles. And it'll accommodate super boost frames up to 157 millimeters by 12 millimeters. Basically you just line that up, drop it into place, and then tighten it down, and then you can use this adapter.At the bottom here, this is a truing unit. Has three indicators that will adjust up and down the arm.
If you loosen back here, you can see, you can slide it up or down the arm to accommodate wheels up to 29 inches in diameter with the tire mounted. Has a nice, let me turn it a little bit just so you can see, has this spring tip lateral indicator, which will detect an unbalanced wheel. Has an axial indicator, which will check the wheel's roundness. And then you put these two together and it's a rotor indicator to check your disc brake for bending or warping.The knob at the base of the arm will let your mount to Feedback sports repair stand, or fold your arm down to storage. Like I was showing you earlier, if you loosen that arm, you can fold this all the way down, just like that.
Or you could actually slide it off and, as we mentioned, mount this to the Feedback Sports repair stand if you need to.On the very bottom here, you can see this mounting plate you can unscrew, and you can use that mounting plate to let you install it onto your work bench if you prefer. Has a nice built in tray here, which will keep your tools and parts close at hand. Slide that back on, go ahead and tighten that down.You can see it's a nice bright red anodized aluminum arm and the steel base will help resist corrosion. If you notice on the bottom of the base, does have these nice rubber feet, which will keep the stand stable on most flat surfaces. You can see this one's not going anywhere, and the base does have some weight to it.The arm length, if we measure this red arm right here, is going to get you right up here to about 16 inches long.
The base itself is going to be eight and a half inches wide, about 10 and three quarter inches long. And the weight of it is just a little bit over nine pounds, about nine and a quarter pounds. Does come with a nice set of instructions that'll describe how to hook everything up and how to check your wheels. That should do it for the review on this Feedback Sports Pro truing stand for your bike wheels..
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
This single-arm stand has 3 indicators that let you true your bike's rims and disc brake rotor. The indicator adjusts along the arm to accommodate tires up to 29". Mount to your Feedback Sports repair stand or to your work bench.The stand works great. I have 29er boost wheels and the stand came with the proper adapter to mount the wheel. The stand breaks down small enough for easy storage. etrailer.com had the best price and the shipping was fast.
Works beautifully! Unboxed it, set it up per enclosed instructions, and put a bike wheel on it to check wheel true. Looked at various [online] videos to learn how and where to adjust spokes. Tightened the appropriate spokes in small increments and the Truing Stand showed improved truing. Then used the disc rotor tool to check rotor truing. Again, works beautifully. Very happy.
Great part and great support from the etrailer team
The only other trying stand I’ve used was a bike hand brand. It is very similar to the park tool version. I like that I don’t have to spend an extra 150ish bucks to put a wheel on this and true rotors. I really prefer this unit as it’s smaller simpler and actually easier to use. You could get your dish off if you aren’t careful but that is a possibility with the other style as well.
Best I’ve used!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.