Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick

See what our Experts say about this Roadmaster Base Plates

• Flat Towing A Jeep Wrangler From The Bumper
  The only adapters we carry for bumper towing are for Roadmaster Tow Bars. The Roadmaster Sterling All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 8K Item # RM-576 with either the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick Item # RM-035 or Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick Item # RM-035-1 will allow you to bumper tow your Jeep Wrangler.
  view full answer...
• Wiring Kit for the Nighthawk All Terrain Tow Bar to Flat Tow a 2018 Jeep Jk Wrangler Unlimited
  To complete the wiring kit included for your 2018 Jeep JK Wrangler Unlimited when using the Roadmaster Nighthawk All Terrain # RM-676 tow bar I recommend going with the All Terrain Towing Combo Kit # RM-9284-2. This includes the wiring and diodes needed to complete the wiring as well as a cover and locks for your Nighthawk All Terrain, silicone rv lube, and a storage bag for keeping all of your loose flat towing components in one place when they are in storage. If you would rather just...
  view full answer...
• Are Adapters Available To Connect A Roadmaster Falcon 2 Tow Bar To A 2020 Jeep Gladiator Bumper
  If you're referring to D-Ring adapters then Roadmaster currently offers two adapters compatible with your Flacon 2 Tow Bar # RM-520 with the only difference being the thickness of the D-Ring. For 3/4" thick D-Rings you'll need part # RM-035 and for 1" thick D-Rings you'll need part # RM-035-1. If you don't have D-Rings then you'll have to go with a standard baseplate and would need to reach out to Roadmaster directly to have them determine fitment with your aftermarket bumper.
  view full answer...
• Recommended Base Plate Kit and Other Parts to Flat Tow a 1997 Jeep Wrangler with Warn Bumper
  To flat tow your 1997 Jeep Wrangler you'll need a tow bar, wiring, and likely a high-low adapter. You'll also want to consult your owner's manual to make sure your vehicle is able to be flat towed without damaging it. Since you have the Warn bumper with the D-rings you can use Roadmaster D-Ring Bumper Mounts # RM-035-1 if they're 1 inch thick or # RM-035 if they're 3/4 inches thick. These will pair nicely with a Roadmaster tow bar like the Falcon 2 # RM-520. To power the Jeep's lights...
  view full answer...
• Should You Have Side-To-Side Play With Roadmaster D-Ring Mount Adapters
  No, having play in the your Roadmaster D-Ring Mount Adapters # RM-035-1 can cause friction which will lead to them failing. You'll want to measure the thickness of the your D-Ring mount and order accordingly. based on the picture you provided it looks like it's 3/4" which would mean you need the Roadmaster D-Ring Mount Adapter # RM-035. You'll want to measure the thickness of your mounts to be sure though.
  view full answer...
  
• Can Jeep Wrangler with Aftermarket Bumper be Flat Towed from D-Rings
  It really comes down to what the aftermarket bumper manufacturer will endorse and say is okay. If the bumper manufacturer states that their bumper can have it's D-rings used for connecting a tow bar it would be okay to do so. If the D-rings are 3/4 inch wide you'd need the D-ring adapter part # RM-035 or if they are 1 inch wide you'd need the part # RM-035-1.
  view full answer...
• Overall Width Of The Roadmaster D-Ring Adapter # RM-035-1
  The Roadmaster D-Ring Adapter # RM-035-1 is approximately 2-1/8" wide so it would technically fit between the direct-connect fittings on your baseplates, but they aren't intended for this kind of use so if anything went wrong you would be liable. The safest course of action would be to swap the adapter and direct-connect attachment points on/off as needed between the two vehicles.
  view full answer...
• Total Width of Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars
  The total width of the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part # RM-035-1 is 2-1/8" which is measured from the outside of the ears.
  view full answer...
• Should There Be Any Gap Between The Roadmaster D-Ring Adapter And The D-Ring
  I've dealt with this issue in the past and Roadmaster stated that there shouldn't be more than 1/8" gap, otherwise you'll get two much play and can start to get friction. Since you're right at 1/8" with the # RM-035-1 you'll most likely be good to go but it wouldn't hurt to reach out to Roadmaster to see if they approve of this for warranty reasons. In the attached video below you can see the same amount of gap at the 1:45 minute mark.
  view full answer...
  
• Parts Needed to Flat Tow a 2006 Jeep Wrangler Rubicon with D-Ring Bumper Mounts
  To flat tow your 2006 Jeep Rubicon you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental brake system, and possibly a high-low adapter. Since your Rubicon has the D-Ring bumper mounts you will want to use either part # RM-035 if the shackle mounts are 3/4" thick or part # RM-035-1 if they are 1" thick. This will take the place of a base plate kit and will work great with the Roadmaster Falcon 2 Tow Bar # RM-520 and RoadMaster 68" Single Hook, Coiled...
  view full answer...
  
• Adapter for Jeep D-Ring Bumper Mount
  We do carry an adapter for Jeep D-Ring bumper mounts, the # RM-035-1 and # RM-035. However these are for Roadmaster tow bars such as the Sterling All Terrain, Non-Binding Tow Bar, # RM-576. Currently there is not a D-Ring bumper mount for the etrailer XHD Non-Binding Tow Bar, # e94ZR.
  view full answer...
• Availability of D-Ring Mounts for Hercules Tow Bar
  We do not currently have any D-ring bumper mounts available that are compatible with your existing Hercules Tow Bar. Your only option will be to either install a standard base plate kit on your Jeep or go with a different tow bar that will work with the Roadmaster # RM-035-1 Adapter. If you decide to go with a new tow bar I highly recommend the Roadmaster Falcon All-Terrain # RM-522 that features a non-binding design for an easy release even when you're on unlevel ground, extra-long telescoping...
  view full answer...
• Tow Bar Compatible With Adapter for Jeep D-Ring Bumper Mounts RM-035-1
  The Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1 has a 1 inch diameter opening, and we know that the Ready Brute Elite II has a larger diameter, which is why it won't fit. Unfortunately, there are no adapters available that will allow a Ready Brute Elite II tow bar to mount to your 1 inch thick shackle mounts. So that does mean you will need a new tow bar in order to utilize the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Tow...
  view full answer...
• Is There a Base Plate Kit for a 2022 Ford Bronco with Aftermarket Bumper
  I do have base plate kit options for a 2022 Ford Bronco but none of which are designed for use with an aftermarket bumper. There are currently only options for models with the factory plastic bumper or models with the Ford Performance Heavy Duty Modular Bumper, the Roadmaster Direct-Connect Base Plate Kit part # RM79RR for the former or part # RM92ZR for the latter. If you have an aftermarket bumper you'll be left with either modifying one of the above or if the bumper has d-rings you can...
  view full answer...
• Cost-Effective Flat Towing Setup for 2009 Jeep Wrangler JK with 7/8 inch D-Rings
  We do have some flat towing equipment for you to get your 2009 Jeep Wrangler to Jeep events and while there are cost effective options, flat towing equipment in general can get a bit pricey so you'll need to keep that in mind. With that being said, I have narrowed down the options for you to some cost-effective products. Since you have the D-Rings on your bumper I recommend using the Roadmaster D-Ring Adapters # RM-035 for 3/4" thick D-Rings or # RM-035-1 for 1" thick D-Rings. Both of...
  view full answer...
• Is a Demco Commander II Adapter Available for D-Rings on 2006 Jeep TJ Bumper
  I reached out to my contact at Demco who said that they don't offer any adapters that will fit the Demco Commander II # DM9511012. Other adapters from different manufacturers, like the Roadmaster # RM-035-1, won't be compatible either but I do have solution for you. Since this is the case your best bet is to swap out your tow bar for the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 which also features a non-binding design and will work with the D-Ring adapter mentioned above. The...
  view full answer...
• Roadmaster Base Plate For A 2011 Jeep Wrangler Rubicon With An AEV Steel Bumper
  We do have a potential option for you, but the Roadmaster Direct-Connect Base Plate # RM-521448-5 is designed to work only with the factory Jeep bumper, so we cannot confirm that it will work with the AEV bumper. Your best option is going to be using the D-ring mounts on your AEV bumper as the attachment point for your tow bar. If the D-ring mounts are 3/4 inches thick with 7/8 inch or 1 inch diameter holes you can use # RM-035 with a Roadmaster tow bar. If the D-ring mounts are 1 inch...
  view full answer...
• Does The Roadmaster D-Ring Adapters RM-035-1 Work With The etrailer Tow Bar #e74ZR
  The etrailer SD Non-Binding Tow Bar # e74ZR you reference is not compatible with the Adapter for Jeep D-Ring Bumper Mount # RM-035-1. Instead, you'll need to use a Roadmaster tow bar like the Roadmaster Nighthawk All-Terrain Tow Bar # RM-676, which is designed to work with their D-Ring adapter # RM-035-1.
  view full answer...
• Off-Road Bumper Adapters For Flat Towing a 1997 Jeep Wrangler TJ
  Currently none of the aftermarket bumpers we carry are rated for flat towing with your 1997 Jeep TJ. We only carry the adapters for either Blue Ox or Roadmaster tow bars which will allow you to connect to an aftermarket bumper which is rated for flat towing. Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings # BX88357 Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1" D-Rings # BX88358 Adapter for Jeep D-Ring Bumper Mounts...
  view full answer...
• Base Plate Options For A 2022 Jeep Gladiator With A Barricade Alloy Bumper
  Hello David. Based on what I can see online the Barricade Alloy Bumper has welded D-rings. Provided this bumper is tow rated, I suggest using the Roadmaster D-ring adapters # RM-035 for 3/4" thick D-Rings or # RM-035-1 for 1" and use a Roadmaster Falcon All Terrain, Non-Binding Tow Bar, # RM-522. I do suggest that you contact the manufacturer of this bumper and verify that it is rated for flat towing. If the bumper is not tow rated, the Roadmaster Direct-Connect Base Plate Kit # RM77VR...
  view full answer...
• Can 2007 Jeep Wrangler Unlimited with Aftermarket Bumper be Flat Towed Behind an RV
  Whether or not you can flat tow using the bumper on your Jeep is up to the bumper manufacturer. It sounds like you will need to keep pressing them for this information. You might ask to speak with an engineer or technical help person there. From what I could find the D-rings that come with the bumper are rated for 4-3/4 tons so the mounts the D-rings are in would have to have at least the same rating. The 2007 Jeep Wrangler Unlimited weighs a fraction of that so I do not foresee it being...
  view full answer...
• Parts Needed to Flat Tow a 2005 Jeep Wrangler with D-Rings on Smittybilt Front Bumper
  The front bumper on your 2005 Jeep Wrangler does resemble the Smittybilt XRC. If that is what you have then you actually won't need a base plate kit as you can use D-Ring adapters to flat tow your Wrangler. We have verified this with Smittybilt in the past. What you will need is either the Roadmaster 1" D-Ring Bumper Mounts # RM-035-1 or the 3/4" D-Ring Bumper Mounts # RM-035 and then a compatible tow bar like the Falcon 2 # RM-520. If you don't already have safety cables then I recommend...
  view full answer...
  
• Adapter to Connect Roadmaster Tow Bar to D-Rings of Jeep Wrangler
  If the D-rings are 3/4 inch thick the adapter you'd need is the # RM-035 or if you have a 1 inch thick D-ring you'd need part # RM-035-1. Both of these work with Roadmaster tow bars like the Falcon 2 part # RM-522.
  view full answer...
• Compatible D-Ring Adapter For Flat Towing Jeep With Smittybilt Bumper With Falcon 2 Tow Bar
  It is possible for you to use the D-rings on your 2015 Jeep Wrangler bumper with the Roadmaster Falcon 2 Tow bar part # RM-520 with the adapter part # RM-035-1 if your D-rings are 1" thick or part # RM-035 if your D-rings are 3/4" thick. I have attached a couple very helpful video for your reference. Please keep in mind your aftermarket bumper does need to be rated for flat towing. According to Roadmaster, Smittybilt is the only aftermarket bumper manufacturer that they know of that approves...
  view full answer...
  

Do you have a question about this Base Plate?