To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.
Features:
Specs:
Setting up these tabless base plates for use with your Demco tow bar is fast and easy. They easily bolt onto the ends of your tow bar. And because the tabs remain on your tow bar at all times instead of protruding from your vehicle, your car maintains a clean look when it's not being towed.
Using the Demco Tabless base plates to attach and remove your tow bar couldn't be easier. With the base plate tabs attached to your tow bar arms, simply insert the tabs into the receivers on your vehicle and twist to lock them in place. Insert the included pull pins to add an extra layer of security, ensuring the tabs stay put. To remove each arm, simply tug the pull pin to disengage the lock, twist the tow bar arm, and pull the tab out of the bracket.
Keep dirt and debris out of the base plate receivers with the included covers. These high-density polyethylene covers easily snap into place over each pull point when your tow bar is not attached. Limiting internal corrosion makes it easier to slide the tabs in and out and helps to prevent seizing so that the tabs don't get stuck.
Demco makes adapters for use with other tow bars so that you don't have to go through the added hassle and expense of replacing your tow bar when outfitting your new towed car with base plates.
Type of Tow Bar | Adapter |
---|---|
Roadmaster Tracker, Falcon 2, Falcon All-Terrain, Blackhawk, Blackhawk All-Terrain, and Sterling tow bars with serial numbers up to 14,500 | DM9523036 |
Roadmaster Nighthawk All-Terrain, Sterling All-Terrain, and Sterling tow bars with serial numbers 14,501 and above | DM9523062 |
Roadmaster Eagle and Eagle 8000 | DM9523014 |
Roadmaster Falcon 5250 | DM9523023 |
Blue Ox | No adapter needed |
etrailer | No adapter needed |
Demco Kwik-Tow | No adapter needed |
Curt Rambler | No adapter needed |
Average Customer Rating: 4.9 out of 5 stars (197 Customer Reviews)
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.Superb Customer Service and Communication!!!! Fast shipping...item delivered sooner than estimated. The baseplate seems very well constructed (as expected of Demco products).
entailer demonstrated its excellent reputation with this order.
Thank you!
I really like the way this base plate installed. Everything fit perfect and I like the look once it was completed. It's a snap to hook up with room for error. Our Jeep pulls like it's not even there.
Good product and quick delivery
Installing it wasn't to bad, took about 5,6 hrs, works great.
Adam was extremely helpful with the parts I needed for my 2021 Jeep Grand Cherokee.
Thanks for the great tow setup! with the videos it was a great install for my wife and I. Went on just as it should and looks super! Most people do not even see it on the Jeep.
Hookup to the motor home is super easy, with the demco tow bar, and hookups. Would recommend to anyone looking to tow, look to Demco!
It works as expected. Very happy.
Dan Manzer
The product itself is great. It fit fine and seems to be designed and built well.
Parts of the installation instructions are not correct for my 2015 Jeep Grand Cherokee Summit. The front fascia has a couple of additional connection points at the bottom and it also connects to the front fender "flares" differently than the instructions show. If you do not realize the differences, then you can definitely damage your front fascia.
Once we got thru the installation this Tow plate system has worked great. I like that it is fully hidden when not in use.
Received product extremely fast. Also they beat Amazon by 10%. I just sent a request before purchase and they handled the rest. Very good company.
Solid.
What I expected. Very pleased with the product.
Relatively easy to install, works great, less obtrusive than other brands. Instructions are clear, quality is good. Shown with knuckles removed. As you can see, I had to improvise to mount the coiled cord socket and breakaway switch.
Love it,my bumper wasn't rated for towing so I had to go this route. Pleased it fit fine with the aftermarket bumper.
This base plate is of exceptional value and construction. It was fairly easy to install on my 2008 Jeep Wrangler by myself but would have been quicker if I had an extra set of hands. Overall I am extremely happy with how the base plate looks and the customer service was above and beyond expectations. I would recommend the base plate and you don't have to look anywhere else than etrailers for what you need.
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
I purchased this as part of a package which included; Hitch and wiring for my 2022 Equinox, Base plate, Tow Bar, brake System and connecting air hose, break away cables, LED tow lights with wiring harness, and a trickle charger to keep the Equinox battery from going dead while I was towing it behind my class A RV.
I had etrailer do the install of all the components on my car and RV. All the workmanship was excellent and done in the amount of time they said it would take. Also because they did not have a video of this equipment being put on this year and model vehicle, I gave them permission to make a video(which added a extra day and a half to the install)and the installation was free. Everything has worked perfectly and I couldn't be happier. Etrailer is my go to for anything towing and also RV parts.
I recently completed a DIY installation of the Demco Tabless Base Plate on my 2021 Jeep Wrangler. Installation is fairly straightforward following the etrailer.com videos. A couple gotchas on the videos.
First, one of the videos suggests removing a sheet metal plate to provide easier access. While it does make for easier access during removal of the bumper, you should reinstall it BEFORE installing the base plate. If you install the baseplate first, there is insufficient clearance for the bolts that hold the sheet metal plate.
Second, the videos show reinstalling the plastic air dam after reinstalling the bumper. At least on my 2021 Wrangler there is NO way you could do that without seriously bending, and possibly breaking the plastic dam. Reattach the dam to the bumper BEFORE reattaching the bumper. Clearances for rebolting the bumper are sufficient. I did it without a lift (thank goodness for the Wrangler’s high ground clearance).
Bottom line is it’s a bit of a project but looks great.
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.