Replacement Attachment Tabs for Demco Tabless Base Plates

Question

Question:

I need to find just the twistlock part for the Demco DM9519291 baseplate the towbar has gone missing with the twistlock parts dont want to have to replace everything can you help thanks

asked by: Reval S

1

Helpful Expert Reply:

It sounds like you are looking for the Replacement Attachment Tabs for Demco Tabless Base Plates # DM86MV. This includes both tabs and are the correct replacement tabs for the Demco Tabless Base Plate Kit # DM9519291.

expert reply by: Scott S

1

Answer 1

What you are looking for is the Replacement Attachment Tab for Demco Tabless or etrailer Invisible Base Plates - Qty 1, #DM86MV. This will replace a missing tab, the removeable arm, of your etrailer Invisible Base Plate Kit, #e98948. Please note the…

view full answer...

Answer 2

The Hopkins Replacement Break-Away Switch part #HM20010 has a normally open circuit which means there will not be any current that passes through the breakaway switch while the pin is intact. Once the pin is pulled the circuit then becomes closed and…

view full answer...

Answer 3

The Demco Base Plate Kit part #DM9519308 requires the removal of the tow hooks on the front of your 2016 Jeep Cherokee Trailhawk. If you check out the attached picture you'll see that the base plate kits basically replaces the tow hooks. There…

view full answer...

Answer 4

The lightest tow bar we have that matches up to the Blue Ox base plate kit on your 2014 Honda CR-V is the Demco Dominator: - Demco Dominator Non-Binding Tow Bar for Blue Ox Base Plates #DM9511008-BX This weighs in at a mere 30 lbs because of the…

view full answer...

Answer 5

The Demco Tabless Base Plate Kit #DM9519340, for your 2019 Jeep Cherokee, only use 1 pin to keep them in place with the actual mounting brackets. I spoke to my contact at Demco who said that if you are having trouble disconnecting these then you…

view full answer...

Answer 6

Yes, you will need to remove the tow hooks on your 2015 Jeep Cherokee Trailhawk to install the Demco Tabless Base Plate Kit #DM9519308. If you wanted to use the tow hooks then you would have to uninstall the base plate kit. There is no horizontal bar…

view full answer...

Answer 7

Yes, we have spoken with Demco and they have confirmed that the Roadmaster Adapter part #RM-035 that you referenced will work with your Demco Dominator tow bar part #DM9511008.

view full answer...

Answer 8

The absolute best tow bar that is offered for your 2016 Jeep Cherokee Trailhawk is the Demco Dominator Tow Bar part #DM9511008. The reason for this is because it is mostly made of aluminum which means it is lightweight (only 30 lbs), has…

view full answer...

Answer 9

If you have a factory brush guard on your 2003 Jeep Liberty, the etrailer Base Plate #e98970 will fit perfectly! There will be no interference with your brush guard. If you need a tow bar to complete your flat-tow setup, I recommend the Demco…

view full answer...

Answer 10

I attached an install video that will show you the entire install process of the etrailer base plate kit part #e98952....but the base plate kit is the Demco part #DM9519308 that's in the video which is essentially the exact same thing. Demco and…

view full answer...

Answer 11

The closest Blue Ox tow bar option to your 7,500lb capacity requirement is going to be the Blue Ox Avail Non-Binding Tow Bar #BX7420, which has a 10,000lb capacity. There are other branded compatible options with 7,500lb capacity, like the Demco…

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Replacement Attachment Tabs for Demco Tabless Base Plates

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching