MaxxTow MaxWorks Creeper Seat Toolbox - 350 lbs

Video Transcript for MaxxTow MaxWorks Creeper Seat Toolbox Review

Speaker 1: Today we're going to be taking a look at the MaxTow MaxWorks Creeper Seat Toolbox, part number NTNW-0206.Now I have one of these, I own one, I use it all the time. These things are great because I like to work on my cars a lot. I have four toolboxes, I can't exactly roll a big toolbox over to where I need to go, so I take what I need, throw it in the drawers, throw it in trays or on the back tray, and I can roll all around my car, anywhere I need to in my garage.In your rolling toolbox, you're going to have three good sized drawers inside. It's going to have a foam pad. It's going to protect your toolbox and your tools. These drawers are also going to come with a locking mechanism so they stay closed when you're rolling around.

Now you're going to have four caster wheels. They're going to allow you full movement; however, there is one thing that I do want to point out is if you notice, the caster wheel, the top of it hits that bolt head and with me sitting on it, the wheels will not turn all the way. The way I fixed it is I took my caster wheel off and I put a washer in there.It's also going to come with two side trays that fold up into place how we have it here, and a strap. Simply unsnap it and set it down. The inside part of this tray is going to be magnetic.

To hold your tools in place if you drop any screws of anything in there, they're not going to go moving around or bouncing around in there.Now this rear tray here, it's going to be good for your hammers, different size screwdrivers, wire cutters, pliers, anything that you can fit inside there. Our seat cushion is going to be 16 and a quarter by 9. It's also going to have a two inch thick cushion pad for the seat. It's going to be made of a sturdy steel construction with a durable powder coat finish to resist corrosion.Now that we've gone over some of the features, let's show you how to put it together. Now this is what's going to come with your kit.

You're going to get your toolbox, there is your three drawers, caster wheels, your side trays, your mounting hardware and your rear tray. Now tools are not included for this assembly; however, all's your gonna need is a T5 Allen wrench, a 13 inch wrench and a 14 inch socket.So the first thing we're going to do is we're going to flip our box over on top the pad. The reason we're going to do that is if you see the holes here, you have it sitting on it's side, the holes aren't going to meet up with your brackets you have here. Next, we'll just line up our holes. What we're going to do is we're going to take our long hexhead bolt and we're gonna feed it through this inside hole in our bracket.

Then on the bottom side, take our washer, followed by the nut. We're going to do the same thing on this side. Next we're going to take our long brackets and you're going to have one on this outside hole and one on this back outside hole. Take our fixhead bolt and a washer and a nut and you're going to do this on all four corners. Once you have your hardware installed, go ahead and tighten everything down.Next, we'll put on our caster wheels. We're going to take the square end, put it in the bottom into the square hole and you're going to take your Allen side, it's going to go through the bottom here and you're just going to thread it into place and we're going to do that same thing on all four corners. One other tool that you are going to need is your Phillips screwdriver and that's to put this back tray on. You're just going to screw the bolts into the existing holes and that'll do it for the MaxTow MaxWorks Creeper Seat ToolBox, part number MTMW-0206.