Yakima 72" HD Tracks for Diamondback Truck Covers

Video Transcript for Review of Yakima HD Tracks Diamondback Truck Cover - Y92AR

Hi everybody. Andy here with etrailer.com. Let's take a brief look at the Yakima HD tracks for your Diamondback truck cover. Now these tracks are going to let you mount Skyline Towers, overhaul or outpost systems to your Diamondback truck cover. And these are going to work with the Landing Pad 26 and the Yakima HD track adapter kit. And that is sold separately.

And these have a load rating of up to 300 pounds, and these tracks are going to mount to your Diamondback trailer cover. Drilling is going to be required. You do get all the mounting hardware that you are going to need to successfully install this. The end caps, as you can see here, are going to allow for the installation of T slot hardware without having to remove the caps, which that's a nice feature. The durable aluminum construction is going to be rust resistant, so it's going to handle the elements that they're going to be constantly exposed to very well.

So you're not going to have to worry about corrosion or anything like that. Now I do want to give you some overall measurements, so I'm just going to lay this one across here, flip it over since it's got a flat surface there, and that'll give me the best surface to measure this. And I'm going to go ahead and get my tape measure here real quick and start with the overall length. So measuring end of end cap to end of end cap, we are sitting right at 24 and a half inches long end to end as you can see there. And then I'm going to get my ruler here for these smaller measurements.

Looking at the overall width, we're sitting right at two inches wide. And then the overall height from the bottom to the top, my thumb's going to mark that measurement there for you. We're sitting right at about three-quarters of an inch tall. Again, instructions are included to guide you through the installation process. Again, you'll have all the hardware that you need.

I think that's going to wrap up our look today. I do hope that our time together was helpful for you. Again, my name is Andy. Thank you for joining me.