Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers - Black
(22 reviews)
Price: $169.95
In Stock
Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers - Black
Item # 8890280
Our Price: $169.95
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (22)
- Q & A (0)
- Videos (1)
- Photos
Yakima Accessories and Parts - 8890280
- Hitch Bike Racks
- Wheel Holds
- Wheel Assembly
- Yakima
- HoldUp
Replaces the front bike tray assembly for your black Yakima HoldUp bike rack (Y02443, Y02443-2, or Y02445). Installs on the bike rack spine, this assembly is closest to your vehicle. Black HoldUp racks need the Y90197 instead.
Features:
- Replaces the front bike tray assembly for your Yakima HoldUp bike rack (Y02443, Y02443-2, or Y02445)
- Installs on the bike rack spine, this assembly is closest to your vehicle
Fits:
- Yakima HoldUp bike racks: Y02443, Y02443-2, and Y02445
- 2-Bike add-on for Yakima HoldUp bike racks: Y02446
Note: Works with the black HoldUp racks only; gray HoldUp racks need Y90197 instead.
8890280 Replacement Front Wheel Holder Assembly for Yakima Hold Up Bike Racks - Black
Video of Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers - Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Yakima Replacement HoldUp Front Bike Tray Assembly - 8890280
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Yakima replacement front bike tray assembly. This is going to fit with your Yakima holdup bike racks, and this will work with the two bike rack for your inch and 1/4 inch hitches, as well as the two bike rack for your two inch hitches. It's also gonna work for the four bike rack and the two bike add-on for your holdup bike rack. So if you have any of those part numbers that you see on the screen there, this is going to be a direct replacement from Yakima, so you can trust it's gonna fit right in place of the original. No worries about fit issues or compatibility problems, anything like that.
But keep in mind this is for the Yakima Holdup, not the Holdup Evo. So I make sure you're getting the right setup for your bike rack. This is gonna have all the same features as your original. It's also going to have this cable lock here. They do include one key for your cable lock, but they also include a control key so you can switch out that lock core for your original, so you can use your original key for both your front and rear bike rack locks there.
So pretty simple to get everything set up just like it was originally. Now keep in mind this is black, so it's going to match with your black holdup racks. If you do have a gray holdup rack, we do have a alternate part number for you that's gonna be gray, so it will integrate more smoothly for you. You don't have to worry about piece together kind of look. It's all going to look like it came right from Yakima.
So, that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers - Black - 8890280
Average Customer Rating: 5.0 out of 5 stars (22 Customer Reviews)
Replaces the front bike tray assembly for your black Yakima HoldUp bike rack (Y02443, Y02443-2, or Y02445). Installs on the bike rack spine, this assembly is closest to your vehicle. Black HoldUp racks need the Y90197 instead.by: Jeff01/19/2024
Honestly I thought I would never find this rack outside of the manufacturer which I would have to buy a larger assembly to get what I wanted but etrailer.com had it separately brand new and awesome.
by: Curtis 12/21/2023
Easy order process, and the replacement was perfect!
by: David B12/11/2020
etrailer does a great job in keeping parts for our Yakima carrier.....other brands may be cheaper but when you use your carrier every other day, part wear out and there is nobody better that etrailer to help with parts, questions and installation diagrams for DIY
by: Darin 06/16/2023
Part came on time and the Etrailer folks are always helpful. Have used this site many times.
by: Michael 08/03/2023
Item worked as expected. Delivered very quickly and was well packaged.
by: James S.10/03/2018
etrailer is top shelf! This was my second purchase and service was excellent. Website provided accurate and relevant product information which took guess-work out of purchase. Replacement part arrived next day after order in perfect condition thanks to a well-packaged shipping box. Free shipping too! Thanks etrailer.com for great service. Protecting my hitch rack from damage, that is on me!
by: Daniel 02/15/2023
Exactly what I needed for replacement. Fast service
by: David 06/15/2023
It was just what I needed! The process of ordering it and receiving it was seamless.
by: Tom05/16/2021
after dealing with the manufacturer and receiving two of the wrong replacement parts, it was a pleasurer to receive the correct replacement part the first time and it arrived when you said it would, Maybe you could give the manufacturer some tips on how to do things correctly.
by: Terry g.12/23/2014
Products were as described, fit perfectly with all required hardware. Products shipped well and George was great to deal with.
by: Joshua10/30/2020
Shipment was packed very well and arrived damage free a week ahead of schedule! Very pleased with this and all purchases from etrailer!
by: Jason01/11/2018
I got this as a replacement for a damaged carrier from an accident. Still works great a year later!
by: Shannon 07/06/2021
As expected in new condition. Glad I could find it.
by: William 11/17/2019
Received in 2 days. Installed in 15 minutes (4 bolts). Awesome experience. Thank you!
by: Harvey 08/14/2023
by: Levi 02/06/2021
Very helpful !! Already in use!! Thanks
by: Brian04/07/2024
by: Gevas07/06/2023
by: Byron 04/08/2023
by: Yi05/25/2023
by: James 02/23/2023
by: Anna 11/19/2021
22
22
See what our Experts say about this Yakima Accessories and Parts
- Replacing a Broken Front Arm on Yakima HoldUp Bike RackIt looks like you have the standard version, the Yakima HoldUp # Y02443. The replacement front arm # 8880833 is only for the HoldUp EVO # Y02479 bike rack. You are correct that in your case, you will need to replace the entire front wheel assembly # 8890280.
view full answer...
- Can Replacement Tray Assemblies be Ordered for Yakima Holdup Bike RackYes you can order an entire tray assembly for the Yakima Holdup # Y02443 with the part # 8890280 for the front tray or # 8890281 for the rear tray.
view full answer... - How to Get Replacement Front Arm for Yakima HoldUp 2-Bike RackWe do have the correct part for you, but the 8880833 is only a fit for the Yakima HoldUp EVO Bike Rack , as opposed to the standard Yakima HoldUp bike rack. Based on your photo, you do not have the EVO, you have the standard HoldUp. The arms are not available by themselves for the HoldUp, for a bent arm you'll need to replace the wheel assembly, and I have added a photo showing the difference between where on the rack the assemblies fit: - Replacement Rear Wheel Assembly for Yakima HoldUp...
view full answer...
- Replacement Wheel Assembly For a Yakima HoldUp Bike CarrierTo ensure you get the correct replacement cross arm for your Yakima HoldUp bike carrier, we will want to know if you have the newer style black model or the older style gray model. If you have the older gray model, then you will want either the Front Replacement Wheel Assembly, # Y90197, or the Rear Replacement Wheel Assembly, # Y90198. The front wheel assembly is the wheel tray that is closest to the vehicle (see photo). The rear wheel assembly can be identified by the Yakima sticker on...
view full answer...
- Wheel Assemblies That Fit Spine for Yakima Plus 2 2-Bike Add-On for Yakima HoldUpYes, the Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281 is the entire assembly and you will also need the Front Wheel Assembly # 8890280 to go with the Replacement Spine for Yakima Plus 2 2-Bike Add-On for Yakima HoldUp # Y8890279. When you combine the assemblies and spine you will have the Plus 2 2-Bike Add-On for Yakima HoldUp for 2" Hitches # Y02446.
view full answer... - Solution for Needing Wheel Tray Cradle of Older Yakima Holdup Bike RackThat does look like an older version of the Yakima Holdup which I do have an option for you but just the front wheel tray is not available. You'd have to replace the entire rear holder assembly with the part # Y90198 and you'd be set.
view full answer...
- Replacement Trays for Yakima HoldUp Bike RackTo replace one of the arms on your Yakima HoldUp Bike Rack for 4 Bikes # Y02443-2 you'll have to replace the entire tray since the arm isn't available as it's own part. You'll need part # 8890280 for the front (closer to vehicle) tray or part # 8890281 for the rear (further from vehicle) tray. The max tire width for 29" tires is 2-1/2" which is why your new bike feels snug. The spines for the HoldUp and HoldUp EVO are different so the only way to get the correct size for your wider tires...
view full answer... - Replacement Rear Wheel Assembly for Yakima HoldUp Bike RackI'm sorry to hear that you were hit by a car (hopefully you're ok!) and we do have exactly what you need, though the arm by itself is not something that is available from Yakima as a replacement part. For your Yakima HoldUp 2-Bike Rack # Y02443 you will need the Replacement Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281. Just in the interest of thoroughness (because front and rear can be confusing on bike racks) I did add a photo showing the difference between the Rear...
view full answer...
- Does Replacement Wheel Assembly 8890280 Come with Mounting Hardware and Lock/KeyThe mounting hardware of your Yakima Holdup would need to be reused with the install of the replacement wheel assembly part # 889020. A lock and key is included with the assembly.
view full answer... - Replacement Front Wheel Assembly for Yakima HoldUp Bike RackThe part closest to the car is actually the front wheel assembly. If you have the older style gray Yakima HoldUp you need Replacement Front Wheel Holder Assembly # Y90197. For the newer style black Yakima HoldUp you need the Replacement Front Wheel Assembly # 8890280.
view full answer...
- Replacement Rear Wheel Assembly Availability for Yakima Holdup Bike RackWe have the exact part you are looking for, part # 8890281. This is the replacement rear wheel assembly for your Yakima Holdup bike rack. The part # 8890280 is the front wheel assembly.
view full answer... - Replacement Wheel Assemblies For The Yakima HoldUp 2 Bike Rack For your Yakima HoldUp Bike Rack for 2 Bikes # Y02443 we have the Replacement Front Wheel Assembly for Yakima HoldUp Bike Carriers # 8890280. If you ever should need the rear wheel assembly, you can use the Replacement Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281.
view full answer... - Parts for Yakima HoldUp Bike Rack to Make AssemblyIf you already have one of the wheel assemblies you will need other parts, including the other wheel assembly as well as the spine assembly and tongue assembly, which is packaged together. So you will need both the Front Wheel Assembly for Yakima HoldUp Bike Carriers # 8890280, Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281 and Replacement Spine for Yakima HoldUp 2 Bike Rack for 1-1/4" Hitches # Y8890278 which says "Spine" but is actually the spine assembly and tongue assembly...
view full answer... - Correct Replacement Wheel Assemblies for the Yakima HoldUp 2 Bike RackI did some research and it appears that the numbers you gave go to the Yakima HoldUp Bike Rack for 2 Bikes # Y02443. With that being said, since you're needing to replace a broken arm you are actually going to need to replace the entire wheel assemblies with both the Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers # 8890280 & the Replacement Rear Bike Tray Assembly for Yakima HoldUp Bike Racks # 8890281 as just the replacement arm is not available. If you have the...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
DeAnne T
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Brian T
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David B.
12/11/2021
Working like knew