Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome
(30 reviews)
Price: $90.41
In Stock
Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome
Item # TWSPWC3BT
Our Price: $90.41
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (30)
- Q & A (0)
- Photos
Tow-Rax Wheel Chocks - TWSPWC3BT
- Motorcycle
- Wheel Chock
- Single Chock
- Steel
- Tow-Rax
- Chrome
This sturdy steel chock attaches to your trailer's wood or metal floor to help stabilize your bike. Keyhole slots make it easy to remove chock for storage. Chrome finish resists corrosion and provides a touch of class. Mounting hardware included.
Features:
- Wheel chock helps to stabilize your motorcycle, dirt bike or other small vehicle for transport
- Works with tires up to 6-1/2" wide
- Keyhole slots let you easily remove chock to free up space when not in use
- Tubular steel construction creates a strong, durable system
- Chrome finish is stylish and corrosion resistant
- 3-Point mounting system - drill only 3 holes into your floor instead of 4
- Mounting hardware is included for installing on a wood or metal floor
Specs:
- Dimensions: 11-11/16" long x 8-3/8" wide x 8-1/2" tall
- Mounting hole dimensions:
- Distance between rear holes: 5-1/2" on center
- Distance between front hole and rear holes: 6-3/4" on center
- Weight: 5 lbs
- Limited 1-year warranty
SPWC3BT TowRax Chrome Tubular Motorcycle Wheel Chock with 3-Point Mounting System - Multi-Surface Mounting Hardware
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Alternate product found
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome - TWSPWC3BT
Average Customer Rating: 4.8 out of 5 stars (30 Customer Reviews)
This sturdy steel chock attaches to your trailer's wood or metal floor to help stabilize your bike. Keyhole slots make it easy to remove chock for storage. Chrome finish resists corrosion and provides a touch of class. Mounting hardware included.by: John 02/04/2023
Easy install in my new enclosed “V” nose trailer with 3/4” decking. The Tow-Rax seems super solid. I haven’t used it yet but plan on hauling my Honda CRF300L as well as occasionally my R1200GS. I got my alignment off a bit on one hole so I had to enlarge one hole on the chock base a bit with a chainsaw file but in the end it worked perfectly.
by: Scott 01/16/2022
The tow ran wheel chocks are well made. I particularly like that the mounting hardware is flush mount when the chock is removed. Nothing to trip over in the trailer.
by: Thomas 05/11/2023
They are great and come would hardware.
by: Lawrence 07/05/2023
Well it is a great product with very fast shipping.
by: Brandon08/14/2022
Missing some hardware that should have came with unit. Made it work but was sub-optimal.
Heather A.
8/23/2022
Oh man, sounds like you were missing some hardware. I sent your information to customer service to assist with that.
by: Daniel09/21/2022
ORDER CAME WITHOUT HARDWARE.
Katrina B.
10/5/2022
I am sorry to hear that you are missing your hardware to your Wheel Chock. I have sent your information over to our customer service department for them to get in touch with you.
by: Donley07/06/2021
bought them for a friends trailer seem to be working out I put bigger bolts in being he has harleys
Donley
7/7/2022
They rusted when left on the trailer outside so they are red
by: Thomas05/14/2018
Great salespeople and they do stand behind each sale to support what they sale. I would defiantly order again from etrailer.com
Thomas
5/14/2019
Great the best
by: Sid D10/26/2020
I bought this to haul my Goldwing trike in my toy hauler. It holds the front tire and keeps any side to side movement to a minimum. It doesn't lock in the front tire front to back (which was not expected) but, after arrival at your destination is easily removable, allowing easy and full access and usage of the toy box after unloading the trike. This works perfect for what I needed.
by: Rick B.01/03/2017
Ordered a wheel chock and a couple of recessed tie downs on Thursday and received them on Saturday. Unbelievably fast turn around. My first time ordering from etrailer.com but will definitely order from them again when needing products for towing trailer or camper.
by: Steve H10/29/2015
We have a Can Am Spyder RT. WE are going to Arizona for the winter. We needed wheel chocks that fit 6 1/2 tires and these Tow-Rax are perfect fit and have all the hardware for wood or medal floors. We have a alumna trailer and they worked out perfect. Got my order shipped in no time. Very fine product. I would recommend this product to anybody who needs this type of product.
by: bob hursh04/17/2016
Excellent. Bought two, am buying two more so four place motorcycle trailer will be complete.
by: Mike Knowles02/23/2023
Fast Service/Shipping Awesome Product 5 Stars
by: Arleen02/11/2018
My husband and I are very pleased with our purchase. It was easy to install and the removable option works out great in allowing us to utilize our trailer for tasks other than hauling our motorcycles.
by: Glenn 07/18/2021
Works great. Use it when I trailer my wife’s 2011 CanAm Spyder
by: Roger 12/26/2021
Perfect; As expected from e-trailer...
by: jimmc1307/06/2016
soon to be installed, as in tomorrow, great instructions and quality parts. leaving Friday for the knucklehead reunion in Milwaukee.
by: Tim 09/08/2022
It was just what I needed
by: Tim 08/30/2022
I like the 3 point bolt down that this chock offered.
by: Wade06/10/2019
Well made. Haven’t used it yet. But don’t anticipate any problems. Great customer service.
by: K-Blaze07/07/2022
Showed up on time and works like advert ised
by: Jim M.04/07/2015
Exactly what I ordered, delivered faster than I expected.
Great service!
by: Ken Cooper02/10/2017
Great product; great quality; was the best buy I found; would recommend this company to any one. Thanks Guys
by: Bob05/31/2018
very solid product and great quality
by: RD03/05/2022
Good quality
25
30
Show More Reviews
See what our Experts say about this Tow-Rax Wheel Chocks
- Could Tow Rax Wheel Chock TWSPWC3BT Fit a Harley DavidsonThe Tow Rax Wheel Chocke part # TWSPWC3BT does not have a weight capacity or a bike size limit. It is dependent on how it is mounted. For example if secured to a metal or solid wood floor using the proper fasteners for that material then it could handle a Harley, no problem. With that said the chock will accept tires that are up to 6-1/2 inches wide so nothing larger than that would fit.
view full answer... - Wheel Chock Availability for a Honda GoldwingIt is not possible to say if your Goldwing with brake covers will fit, since the part that comes close to the disc is at an angle. You would have to physically test it.. I have seen pictures of similar Harleys and the tube runs very close to the rotor. The Rack'Em Manufacturing Removable Wheel Chock # RA-17 does not have a weight capacity or a bike size limit. It is dependent on how it is mounted. For example if secured to a metal or solid wood floor using the proper fasteners for that...
view full answer... - Recommended Removable Wheel Chock for 2016 Indian Vintage Motorcycle Great news! I found that the width of your 2016 Indian Vintage's front tire is just over 5 inches. This will work great with the removable Tow-Rax Wheel Chocks. Depending on what type of trailer floor you have we off the wood screws with chock in black # TWSPWM or chrome # TWSPWC. We also have a chrome with multi-surface mounting kit for metal or wood floors # TWSPWC3BT. Any of the Tow-Rax Wheel Chocks can use the metal floor hardware kit # TWSPWFKM sold separately. I have linked a...
view full answer... - Recommendation for a Removable Wheel ChockWe have TowRax chock # TWSPWM, # TWSPWC, and # TWSPWC3BT. These chocks have a keyhole shape opening where the large end fits around a bolt head. When the bolt is tightened down on the skinny end it cannot be removed. When the hardware is loosened, the chock can be slid back to slip over the bolt head.
view full answer... - How to Carry 2 Vespa 300 Scooters with a 32ft Class C Motor HomeYour best option for carrying your Vespa 300 scooters with your Class C motor home is to pull a small trailer. We do not have any hitch mounted motorcycle carriers that will allow you to carry both scooters at the same time. We have everything you need to equip a simple cargo trailer for carrying both scooters. A few parts you will want to look into are wheel chocks like part # TWSPWC3BT (1 per scooter), tie down rings like part # RR05, and tie down straps, like # EM31352.
view full answer... - Trailer Hitch Recommendations for 2014 Toyota PriusYou'd first want to equip your Prius for towing by installing a trailer hitch. I'd recommend the Draw-Tite Class I trailer hitch, part # 24847. For a trailer wiring harness, use part # C56147. You'll also need a drawbar, part # 3594 and the appropriately sized trailer ball. For a 1-7/8 inch ball, use # 19256 or for a 2 inch ball, use # 19258. Keep in mind that Toyota didn't recommend using certain Prius model years for towing, so you'll want to consult your owner's manual for clarification. Part...
view full answer... - What Trailer do You Recommend to Transport My Emojo Caddy E-Trike and Additional E-Bike?I have a great transporting solution for you. I did some research on your Emojo Caddy Pro E-Trike, and we unfortunately do not have an option for this trike that will support the 90-pound (with battery) weight and allow you to mount your other e-bike. However, the best option to transport the Emojo Caddy along with your other e-bike is the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long # K2MMT5X7. The great thing about the Detail K2 Mighty trailer is that you can use the gate...
view full answer... - Motorcycle Wheel Chock Recommendation that is RemovableThe mounting hardware included with the MaxxTow adjustable wheel chock, (DISCONTINUED) MT70075, is designed for a permanent installation. However we do have several wheel chocks that are considered removable because of how they mount. We have TowRax chock # TWSPWM, # TWSPWC, and # TWSPWC3BT. These chocks have a keyhole shape opening where the large end fits around a bolt head. When the bolt is tightened down on the skinny end it cannot be removed. When the hardware is loosened, the chock...
view full answer... - Mounting Hardware For The Tow-Rax Removable Wheel Chock Yes, the mounting hardware for the Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome # TWSPWC3BT can be found with part # TWPH2770.
view full answer... - Installation of Tow-Rax Removable Wheel Chock # TWSPWC3BT on Plywood FloorThe Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on either wood or metal surfaces using the included hardware kit. You will need a drill with 7/16-inch bit for wood floors or a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver. We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine the...
view full answer...
- How Wide is the Base of the Tow-Rax Wheel Chock # TWSPWC3BT The overall width of the Tow-Rax Wheel Chocks # TWSPWC3BT is 8-3/8 inches. I attached a picture that shows this dimension.
view full answer...
- Installing the Tow-Rax Removable Wheel Chock # TWSPWC3BT on an Aluminum TrailerThe Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on metal surfaces using the included hardware kit. You will need a drill with a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver. We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine the fit for your application. Basically you drill...
view full answer...
- What is the Difference Between the Tow Rax Motorcycle Wheel Chocks TWSPWC3BT and TWSPWCThe difference is the included mounting hardware. The # TWSPWC3BT comes with anchors and hardware to attach to metal or wood floors whereas the part # TWSPWC only comes with wood screws. I attached a review video for both chocks for you to check out as well.
view full answer... - Inside Width of Tow-Rax Removable Wheel ChockThe inside width of the Tow-Rax Removable Wheel Chock part # TWSPWC3BT is 6-1/2".
view full answer...
- Tire Width Range for Motorcycle Wheel ChocksThe range of tire width motorcycle wheel chocks we offer ranges are up to 6-1/2 inches like the part # TWSPWC3BT. I attached review videos for both chocks for you to check out as well.
view full answer... - Mounting Hardware for Tow-Rax Removable Wheel ChockYes, you can use the mounting hardware kit # TWPH2770 with the Tow-Rax removable wheel chock, # TWSPWC. there is also a kit that comes with the chock and the hardware in one part number. It is # TWSPWC3BT. I have included a link to a video on the wheel chock for you.
view full answer... - Motorcycle Wheel Chock for Metal Floor TrailerThe Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on metal surfaces using the included hardware kit. You will need a drill with a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver. We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine the fit for your application. Basically you drill...
view full answer...
- Wheel Chock For Motorcycles on Open Bed TrailerWhat you can do is use wheel chocks and install them directly to the bed of your trailer, and we have an option that will work on either wood or metal trailer beds, and tires up to 6-1/2 inches wide: - Tow-Rax Removable Wheel Chock with Hardware # TWSPWC3BT The # TWSPWC3BT comes with the needed hardware for either surface, and is removable if you want to use your trailer for something other than hauling your bikes.
view full answer... - Motorcycle Trailer Wheel Chock Recommendation that Can be Used in More than One TrailerIf you went with the Tow Rax Wheel Chock part # TWSPWC3BT you could use replacement hardware part # TWPH2770 and basically be able to mount a single chock in several trailers. The chock easily removes off of the hardware by sliding backwards and pulling up. You'd just need a set of hardware for each trailer and you'd be set.
view full answer... - Can Motorcycle Wheel Chock Be Installed in Trailer Floor with Mesh FloorYou'd have to get somewhat creative to install a motorcycle wheel chock like the part # TWSPWC3BT to a mesh floor trailer. Ideally I'd recommend you mount the chock to a piece of plywood and then mount the wood to the mesh floor or remove it each time you use it.
view full answer... - How to Use the Hardware Kit part # TWPH2770 to Install a Wheel ChockThe Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on either wood or metal surfaces using the hardware kit part # TWPH2770. You will need a drill with 7/16-inch bit for wood floors or a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver. We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine...
view full answer...
Do you have a question about this Wheel Chock?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Andrew J
Updated by:
Wilson B
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Glenn
7/19/2022
The wheel chocks worked great. I use them for my wife’s 2011 Spyder on the front wheels. We haul three motorcycles on trailer and the Spyder is last to load. I love the flush mount so we can back off other bikes without having to remove the bolts and nothing sticking up in our way backing of my Harley and friends Goldwing