Can Roof Rack Accessories Designed for Crossbar Top Channels Fit Yakima LockNLoad

Question

Question:

What is the correct size track nut for yakima locknload channels? Do you carry them.

asked by: John G

0

Expert Reply:

The channels on top of the Yakima LockNLoad Platform Rack for Crossbars like the part # Y05045-39 are designed to accommodate roof rack accessories that were designed to attach to crossbar top channels. So basically any track nut designed for roof rack installed accessory top channels is goin to work like the # 853-2106 but you really will want to base it off what the accessory is and whether it was designed for top channel install.

expert reply by: Jameson C

0

Answer 1

The Replacement M10 Channel Nut for Rhino-Rack Accessories #RR89TB has a M10 thread size and base dimensions of 35mm x 19mm x 8mm.

view full answer...

Answer 2

I pulled this from our warehouse and it was a lot smaller than I originally thought. In the attached picture I have all of the dimensions you requested noted. To give you a quick overview of the dimensions: Thickness - .16 inches Long Sides - .993…

view full answer...

Answer 3

I have an answer for you. I reached out to my contact at Yakima and they said that they specially make t-slot hardware for accessories that are designed to fit into LockNLoad Platforms like the #Y05044-39. With that being said, there is no way to…

view full answer...

Answer 4

The T-Slots on the Yakima LockNLoad Platform Rack #Y05044-39 have the same dimensions as standard crossbars so you can basically use any brand of T-Bolts to accomplish your job. For example, you can use the Thule Square T-Bolt #853208914 or the…

view full answer...

Answer 5

The T-slots used by the Rhino-Rack Pioneer Platform and the Yakima Lock N Load are the same dimension, so the #RR43157 Rhino-Rack Hi-Lift Jack/Shovel Holder should work fine on the Yakima Lock N Load.

view full answer...

Answer 6

According to Yakima, the shortest crossbars that will work on your Ridgeline is their 'medium' crossbar which is the 60 inch long #Y00426. If you go any shorter than that, the bar won't be long enough to properly connect to the roof rack…

view full answer...

Answer 7

The Yakima LockNLoad Platform Racks like part #Y05044-39 won't work with roof boxes so if you have a 2019 Toyota Land Cruiser the Rhino-Rack Pioneer SX Platform Rack part #JA9134 would be a better option. Furthermore, the LockNLoad requires…

view full answer...

Answer 8

The Yakima LockNLoad Platform Rack for Crossbars #Y05045-39 would add right at 4 inches to the height of your vehicle.

view full answer...

Answer 9

The dimensions of the Wingbar Thule crossbars like part #TH711420 are 3-1/8" wide x 1" tall.

view full answer...

Answer 10

I spoke with Yakima, and they informed me that the t-track on the Yakima LockNLoad Platform Rack for Crossbars #Y05045-39 measures 8mm (.31") high, and measures 11mm (.43") wide. Attached is a diagram of depicting these measurements for you…

view full answer...

Answer 11

You can use the Yakima LockNLoad Platform Rack On your A.R.E. HD MX Series Truck Cap. The mounting hardware wraps around your crossbars to secure it into place. If you have 2 crossbars on the roof, the largest platform you can put up there is…

view full answer...

Answer 12

Yes, the Inno Box 2020 Rooftop Cargo Box - 14 cu ft - Matte Black, part #IN86FR, can attach to the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 60" Long x 54" Wide, part #Y05045-39, with the addition of the Aero Crossbar T-Slot…

view full answer...

Can Roof Rack Accessories Designed for Crossbar Top Channels Fit Yakima LockNLoad

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching