Do Track Nuts # 853-5147 and # 853-2106 Have Same Thread Size

Question

Question:

Hello, Could you tell me if the larger Thule track nut 853-5147 is the same size screw hole/threads as the smaller 853-2106 track nut that comes with the 3101 fit kit? I would like a larger foot print track nut that provides more contact for securing to the track than the slim nuts that come with the 3101 fit kit. I have tracks on my canopy shell not sure brand, installed by canopy dealer who sells Thule and Yakima. I have Thule podium feet for old style square bars and a 3101 fit kit for the tracks. Thank you for any help you can provide.

asked by: Alan G

0

Expert Reply:

Both track nuts you mentioned of # 853-5147 and # 853-2106 have M6 thread size.

expert reply by: Jameson C

0

Answer 1

I pulled this from our warehouse and it was a lot smaller than I originally thought. In the attached picture I have all of the dimensions you requested noted. To give you a quick overview of the dimensions: Thickness - .16 inches Long Sides - .993…

view full answer...

Answer 2

The Track nut #853-2106 that you referenced will also work on the TK1 roof rack fit kit so it would be exactly what you would need.

view full answer...

Answer 3

In sort of a backwards way we know that the part #753-2149 does fit the feet you have since we had a customer with a TK1 tell us that on the bottom of the foot they say your same part number of 8535122

view full answer...

Answer 4

It looks like we have everything you would need except for one of the washers (washer 951061312). I have listed the parts out below. TK1 Base - Part #753-2149 Cover -- Part #853-7084 M6 x 17 mm Bolt -- Part #924-0617-15 M6 Washer - Part #951061254…

view full answer...

Answer 5

The track nut part #853-2106 is M6 and is sold individually.

view full answer...

Answer 6

For your TK1 system, you will want the Replacement FootBase Thule Tracker Roof Rack #753-2149. Depending on the rails you have, you will either want the track nut #853-2106 or #853-5147. Then you will want bolt #924-0617-15 with key #853-2430-02.…

view full answer...

Answer 7

The Replacement Track Nut for Thule Tracker II Half Foot Pack or Tracker Fit Kits TK6, TK8, TK9 #853-2106 will fit in your tracks and were designed to secure the Tracker II feet to the rail using bolt #924-0617-15. Without knowing what towers you…

view full answer...

Answer 8

Yes, the track nut used for the Thule Fit Kit #THKIT3101 is the same one that was used for the discontinued TK1. If you are just needing to replace the track nut then we have it available as part #853-2106 on our site.

view full answer...

Answer 9

Replacement Track Nut for Thule Tracker II Half Foot Pack or Tracker Fit Kits TK6, TK8, TK9 #853-2106 is made to be used with Replacement M6 x 17 mm Bolt for Thule Tracker II Half Foot Pack or Fit Kits #924-0617-15. The threading on both parts is…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Do Track Nuts # 853-5147 and # 853-2106 Have Same Thread Size

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching