Heat Shield for Rock Tamers Mud Flaps - Heavy Duty - Stainless Steel - Qty 1

See what our Experts say about this Rock Tamers Accessories and Parts

• Picking Between Heat Shield and Grille Outlets for Rock Tamers Mud Flaps
  If the exhaust pipes are straight back and very close to the Rock Tamers mud flaps part # ERT00108 I'd recommend the grilles part # ERT200 but if they are angled or there's a decent distance the shield # RT76FR is the way to go.
  view full answer...
• Solution For Installing Rock Tamers Mud Flaps Close To Exhaust On 2020 GMC Sierra
  When installing Rock Tamer Mud Flaps, there is not an exact distance that it needs to be form the exhaust. If the exhaust on your truck is routed straight back then you will want to install Exhaust Outlets # ERT200 so that the exhaust is routed through the Rock Tamer Mud Flaps # ERT00108. If the exhaust is not extremely close or is not routed straight back, then the best route is to install Heat Shield Stainless Steel - Qty 1 # RT76FR on the exhaust side. This way the mud flaps will not...
  view full answer...
• How to Prevent Exhaust from Melting Rock Tamers Mud Flap
  The heat shield part # RT76FR that you referenced was designed to prevent the type of damage you have on your Rock Tamers mud flap so this would be best solution. Other option is to have a turn down welded to your exhaust tip so that it is directed away from the flap. For a replacement mud flap you'd then want the part # ERTO22.
  view full answer...
  
• Heat Shield Needed For Rock Tamers Mud Flap System To Protect From A Hot Exhaust Pipe
  To prevent your exhaust from melting the Rock Tamers Heavy-Duty, Adjustable Mud Flap System # ERT00110 you can mount a heat shield like part # RT76FR on the flap. This will allow you to place the mud flaps in by the exhaust and not have to worry that they'll be damaged or allow rocks to fling up into the bumper.
  view full answer...
• Rock Tamers Needed For A 2024 GMC Sierra 2500 With Blue Ox WDH
  Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want # ERT00108, for 2.5" x 2.5" you need part # ERT00110. The WDH shank should be what you're going off of so 2" is more likely what you'll need. Rock Tamers offers a bolt-on heat shield # RT76FR to help protect the flaps from the exhaust. If you ever change out the WDH with something that has a...
  view full answer...
• Recommended Rock Tamers Rock Guard For A 2005 Chevy Silverado With A 2" Hitch
  Rock Tamers make rock guards for 2", 2-1/2", and 3" opening trailer hitches. Typically the higher the capacity of the truck the larger the trailer hitch opening will be. For your 2005 Chevy Silverado with a 2" hitch you'll need part # ERT00108. If you had a 2-1/2" hitch you'd need part # ERT00110. If you had a 3" hitch you'd need part # RT54FR. Whether or not you'll need the Heat Shield for Rock Tamers Mud Flaps # RT76FR for your Rock Tamers will depend on where your exhaust is angled....
  view full answer...
• Heat Shield For Use with Rock Tamer Mud Flap System
  Rock Tamers has a heat shield specifically for their mud flaps as the part # RT76FR which is the kit you'd want since this is the mud flap system you have. There's no reason the Access one you mentioned couldn't be used but the gap the Rock Tamers kit creates between it and the flap will do a much better job preventing heat transfer.
  view full answer...
  
• Will Rock Tamers Mudflap Heat Shield Protect Flaps from Melting
  The angle of the arms that hold the flaps of the Rock Tamers Heavy-Duty, Adjustable Mud Flap System # ERT00108 are adjustable so that you can add distance between the tail pipe and them as needed. If you install the heat shield part # RT76FR that you referenced though you will not have to worry at all about the flaps melting. The metal of this insulates the flaps from getting hot enough to melt even with diesel engines that have very hot exhaust.
  view full answer...
  
• Fit of Rock Tamers ERT00108 Hitch Mounted Mud Flaps on 2011 Toyota Sequoia
  The Rock Tamers # ERT00108 is width adjustable from 67-1/4 to 96-3/4 inches wide. Since the wheel track of your Sequoia is 69 inches at the rear, the # ERT00108 would fit the vehicle. Whether you'll need the # RT76FR heat shield or the # ERT200 outlets will depend on how and where your exhaust exits the rear of the vehicle. The shields are sold individually, the outlets are sold in pairs. If the exhaust outlet will be within a foot of the mud flaps, I'd recommend getting the heat shields...
  view full answer...
  
• Best Way to Protect Trailer From Rock Damage When Towing With Motorhome
  There are screens for flat towing set ups that attach to a tow bar, but for traditional towing on a trailer the best option are mud flaps/rock guards, the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches # ERT00108. These are large guards that measure 24-1/4" long x 23-7/8" wide x 3/8" thick each, and the width can be adjusted to measure anywhere between 67-1/4" to 96-3/4" from outside to outside. If your exhaust is anywhere close, you can also add the Heat Shield for...
  view full answer...
  
• Rock Tamers Heat Shield or Outlet Vent for 2021 GMC Sierra 1500 3.0 Diesel
  Diesel exhaust is much hotter than gas exhausts so while the outlet kit part # ERT200 is pretty clever I would recommend going with a heat shield instead with part # RT76FR. There isn't an exact distance that's recommended between the exhaust and the heat shield. In order or the vent to work the exhaust would have to be pretty close to where the mud flap is and it would need to point straight back which I don't believe is the case for your 2021 GMC Sierra 1500 diesel.
  view full answer...
• Will Exhaust Melt Rock Tamers Mud Flaps
  The Rock Tamers Heavy-Duty Adjustable Mud Flap Systems, like part # ERT00108 for 2" hitches, will melt if the exhaust is pointing right at them. Because of this Rock Tamers came out with their Heat Shield # RT76FR which you can add to protect the rubber and prevent the exhaust from burning a hole through it.
  view full answer...
• Do I Need To Use Heat Shield With My Rock Tamers?
  I suggest using heat shields # RT76FR with the rock tamers # ERT00108 unless you have an aftermarket tip on your exhaust that makes a complete 90 behind the tire.
  view full answer...
• Rock Tamer Mud Flap and Heat Shield Recommendation for 2017 Chevy Silverado 2500HD
  We have a heat shield # RT76FR for applications like your 2017 Chevy Silverado 2500 where the exhaust points right at the flap of the part # ERT00108. This would be your ideal solution and would work well.
  view full answer...
• Do Rock Tamers Mud Flaps Work With Silverado With Dual Exhaust
  Hi Matt; the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches # ERT00108 can work with your Silverado with dual exhaust, but you'll need a heat shield or exhaust outlets. Both will go on the Rock Tamers, and if your dual exhaust will be very close to the mud flaps (which would be the case if your exhaust was about even with the face of the hitch) then go with the Exhaust Outlets for Rock Tamers Mud Flaps # ERT200. You would cut a hole in the mud flaps where the exhaust...
  view full answer...
• Heat Shield for Rock Tamers Mud Flaps for Truck with Rear Exiting Exhaust
  For vehicles that have rear existing exhaust Rock Tamers has a heat shield available with the part # RT76FR which you could use with the Rock Tamers for 2 inch hitches part # ERT00108 and you'd be set. This would protect the mudflaps from melting due to heat.
  view full answer...
• Will the RoadMaster RoadWing Removable Mud Flap System Need to Be Trimmed if the Exhaust Will Hit it
  The RoadMaster RoadWing Removable Mud Flap System for Full Size Trucks # RM-4400 will need to be trimmed if the flaps are in the path of the exhaust. Exhaust heat can melt the mud flaps, but they can be trimmed. So, you would just want to trim away where the exhaust would be hitting the mud flaps. You could also add the Heat Shield for Rock Tamers Mud Flaps # RT76FR, if you'd rather not trim the mud flaps.
  view full answer...
• Recommended Rock Tamer Mud Flaps for a 2020 Chevy Silverado 2500
  The correct Rock Tamer Mud Flaps for a 2020 Chevrolet Silverado 2500 is part # ERT00108 for 2" hitch receivers or part # ERT00110 for 2-1/2" hitch receivers. If you don't know what size trailer hitch receiver you have, just measure the inside opening to see if you get 2" or 2-1/2". Please note, you will need to use a ball mount with a shank long enough for the clamp on the Rock Tamer Mud Flaps to attach. This will not be an issue for most ball mounts but the Weigh Safe 2-Ball Mount w/ Built-In...
  view full answer...
  

Do you have a question about this Accessories and Part?