Roadmaster Hardware Kit for 1-1/2" Diameter, Rear Anti-Sway

Roadmaster Accessories and Parts - RM-4209-131

Replace all of the components except the sway bar itself in your Roadmaster rear anti-sway bar kit (RM-1209-131) with this all-inclusive hardware kit.

Features:

• Replaces all of the components except the sway bar itself in your Roadmaster rear anti-sway bar kit (RM-1209-131) with this all-inclusive hardware kit.
• Kit includes:
  • 2 Bushing clamps
  • 1 Axle bracket
  • 1 Frame bracket
  • 2 End links
  • 2 Bushings
  • 4 Bushing hats
  • 2 Metal sleeves
  • 2 Bushing sleeves
  • (8) 1/2" x 1-3/4" Grade 8 zinc bolts
  • (10) 1/2" Nylon insert zinc locknuts
  • (16) 1/2" Cut washers
  • (2) 1/2" x 3" Grade 8 bolts
  • (4) 9/16" Cut washers
  • (2) 12mm x 1.75 x 60mm Bolts
  • (2) 12mm x 1.75 Locknuts
  • 1 Container of Aqualube
  • 2 U-bolts
  • 4 Bushing hats
  • 2 End links

Superior Construction

The lubricated bushings in your anti-sway system allow just enough pivot and rotation to compensate for the pressure placed on one side of your vehicle when it goes into sudden maneuvers, hits crosswinds or encounters shifting weights. These bushings, therefore, must be both durable and flexible. Polyurethane allows an appropriate amount of give and lasts longer than rubber, which is the standard material used in bushings, thus ensuring that the system is neither so rigid nor so malleable that it becomes ineffective.

4209-131 Roadmaster Hardware Kit for 1-1/2" Diameter, Rear Anti-Sway

Installation Details