Replacement Brass Bushing for Weld-On Hinges - 20 MM

Video Transcript for Review of Marlboro Replacement 20 MM Brass Hinge Bushing - MA88ZR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this replacement brass bushing. This is going to replace the brass bushing that originally came with your weld-on hinge. This is going to ensure that your hinge will function properly so that you don't have to worry about it binding up and not opening and closing. This is gonna make sure that you have a nice smooth operation for your hinge, this is right at 20 millimeters in outside diameter, our inner opening there is about 13 millimeters and then our thickness is approximately two millimeters. So, it is going to fit right in place of that original, and it is that same brass construction so it is gonna resist corrosion and hold up really well for you for a long time to come.

It's very easy to get this switched out, basically just pull your pin side of your hinge out, pull off that original bushing, put this one in its place, and then reconnect your hinge and you'll be ready to go, have a nice smooth operation. So, if you're needing to replace that bushing, this is gonna be exactly what you need. That's going to complete our look for today, again, I'm Michael with etrailer.com, thanks for watching..