12V Single Rocker Switch - On/Off - SPST - Chrome Plate

Video Transcript for Review of JR Products Wiring Parts - Rocker Switch with Chrome Faceplate - 37213885

Hey everyone. I'm Ellen here at etrailer.com, and we're going to be taking a look at the rocker switch with face plate. This is going to have a nice chrome face plate to kind of finish up the look. It would be great as a light switch or any other kind of electric switch, maybe for your slide out or another item that you want to turn on or off. It is going to be a single pole, single throw switch. That means it just turns one thing on or off.So let's take a closer look and make sure that this is going to be the right fit for your application.

So you can see that red switch with that black background against our chrome face plates. That holds it nicely in place. And again, just gives us that kind of complete, finished look to it. As far as the specs, again, single pole single throw. It is rated for 10 amps at 250 volts AC or 15 amps at 125 volts AC.

The size of our face plate from the outer edge outer edge is about one or. Excuse me, two and three quarter inches, roughly probably closer to actually two and eleven sixteenths, and then about one and five eighths inches wide. The actual switch itself, if you wanted to ever separate it, it's about one and a quarter by about five eighths of an inch.That's pretty much all there is to it for our look at the single rocker switch. I hope this has been helpful in deciding if this is the right one for you. One last measurement I do want to give you is the additions inaudible 00:01:47 mounting holes, just in case you're trying to replace an already existing switch.

Looks like the distance between them center to center is about two and an eighth of an inch. So that's pretty much it, it does not come with any mounting hardware. So that is something you will have to pick up on your own. A couple of small wood screws will probably do just fine. Thanks for watching, we'll see you out there on the road..