Erickson Adjustable Bungee Hooks - Qty 10

Video Transcript for Erickson Tie Down Straps EM05296-10 Review

Speaker 1: Today we're going to take a look at the Erickson adjustable bungee hooks. These are available in a quantity of one, two, or ten. This is going to allow you to attach your bungee cord to a secure point on your truck or trailer to secure down any light-weight cargo that you might need to secure.It's going to work with adjustable bungee cords from a quarter to 5/16th of an inch in diameter. The cord or roll is sort separately. To get that attached, you're just going to thread it through the large hole at the base of the hook and then up through that slot in the center and down through the slotted whole at the bottom. It helps to stretch that cord to sort of thin it out and then press it into place.

And then you're just going to press that in there.That's going to hold that secure so we don't have to worry about any slippage on our cord. There's also going to be that keeper in the center of the hook to keep that attached so we don't have to worry about that slipping off the attachment points either.This is going to be made of a durable high-strength plastic construction. As far as the dimensions with this hook, remove the bungee cord, that does allow you also to adjust it to whatever length you need that cord to be. But as far as the dimensions, it's going to be about three inches in length overall. At its widest point, it's going to be just about one and 3/4 of an inch to the end of that hook.

And the opening from inside edge to inside edge is going to be 3/4 of an inch.Again, this is available in several different quantities. For a single hook, the part number is going to be EM05296-1. For two or a pair of hooks, that'll be EM105296-2. For ten hooks, that's going to be EM105296-10. That's going to do it for our look at the Erickson adjustable bungee hooks for bungee cords..