Erickson Adjustable Bungee Hook - Qty 1

Video Transcript for Erickson Tie Down Straps EM05296-1 Review

Speaker 1: Today we're going to take a look at the Erickson adjustable bungee hooks. These are available in a quantity of one, two or ten. This is going to allow you to attach your bungee cord to a secure point on your truck or trailer to secure down any lightweight cargo that you might need to secure.It's going to work with adjustable bungee cords from 1/4 to 5/16 of an inch in diameter. The cord or roll is sold separately. To get that attached, you're just going to thread it through the larger hole at the base of the hook and then up through that slot in the center and down through the slotted hole at the bottom. It helps to stretch that cord, thin it out and then press it into place.

Then, you're just going to press that in there. That's going to hold that secure, so we don't have to worry about any slippage on our cord. There's also going to be that keeper in the center of the hook to keep that attached, so we don't have to worry about that slipping off the attachment points either.This is going to made of a durable, high strength plastic construction. As far as the dimensions with this hook .. remove the bungee cord.

That does allow you to adjust it also to whatever length you need that cord to be. But as far as the dimensions, it's going to be about three inches in length overall. At its widest point, it's going to be just about two, or just about 1 3/4 of an inch to the end of that hook. And the opening from inside edge to inside edge is going to be 3/4 of an inch.Again, this is available in several different quantities. For a single hook, the part number is going to be EM05296-1.

For two or a pair of hooks, that will be EM05296-2. For ten hooks, that's going to be EM05296-10 or dash ten.That's going to do it for our look at the Erickson adjustable bungee hooks for bungee cords.