CIPA Rearview Mirror for UTVs - 10-1/4" Long x 3-3/4" Tall - Clamp On - Black

Video Transcript for CIPA Mirrors - ATV - UTV Mirror - CM11170 Review

Today we're going to be taking a look at part number CM11170. This is the CIPA Rearview Mirror for UTVs. It's going to mount to your utility vehicle or side-by-side. That way you can see what's behind you. It's going to feature two ball-and-socket joints that's going to enable you to adjust the angle of the mirror. That way you can set it how you like it.

You're going to have one right here at the back of the housing. You can see how that pivots. The other one is going to be just like that one, here at the base of the clamp. Now the neat thing about the ball-and-socket joints is that they're very easy to move when a little bit of force is applied, but you don't have to worry about these things jarring loose if you take your UTV through the woods or on the trail and go over some rough terrain. It's not going to bounce and shake loose from where you have it set, so it gives you that adjustability. It's also going to feature a convex lens.

That way you can get that wide angle that you're looking for, which is going to minimize the amount of blind spots. It's going to feature a shatterproof acrylic lens with a durable ABS plastic housing. It's going to feature a low carbon steel arm with a lightweight rust-proof aluminum bracket that's going to easily clamp onto the round bar of your roll cage. Now this is designed to fit one and three-quarter inch diameter round bars. The overall dimensions here, of the mirror face, going length-wise, it's going to measure ten and one-quarter.

Then the height is going to measure three and three-quarters of an inch. That's going to do it for today's review of part number CM11170. This is the CIPA Rearview Mirror for UTVs. .