Customers compare 335TSC-1000 to these similar products
Products Featured in this Video
Speaker 1: Today we're taking a look at the Tuson electronic sway control system. This system limits side-to-side movement of your trailer while towing. It corrects sway by activating your trailer's electric brakes, and it's more effective when compared to friction sway control systems, because this gets ahead of sway before it really happens, or before it becomes noticeable to the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…
view full answer...The instructions for the orientation of the Tuson Sway Control part #335TSC-1000 when installed are very specific. The red dot on the label has to be at the trailer's center line and the arrows on the label that say "Mount with this…
view full answer...If the manufacturer does not allow for a weight distribution hitch like the Equal-i-zer #EQ37060ET you can use the Tuson Asymmetric Sway Control #335TSC-1000 to help with sway. This system uses the electric brakes on the trailer to help reduce sway…
view full answer...The Tuson Electronic Sway Control System #335TSC-1000 has been confirmed to work with Dodge OEM brake controllers (verified by Tuson) and is compatible with 1 - 4 axles. Since you have an OEM controller on your 2018 Ram 2500 and your 30' travel…
view full answer...The Tuson Electronic Sway Control System for Electric Trailer Brakes #335TSC-1000 has installation instructions that give a placement location on the center of your trailer and 5-10 feet behind the hitch ball. The unit comes with a wiring harness so…
view full answer...The label side of the Tuson Electronic Sway Control System for Electric Trailer Brakes #335TSC-1000 needs to face forward and be in a vertical orientation perfectly centered on the trailer 5-10 feet back from the center of the king pin like what you…
view full answer...When it comes to choosing between the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 and the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37100ET you'll want to take a couple of things into consideration: 1.…
view full answer...The Curt TruTrack Weight Distribution System part #C17499 is the perfect option for a trailer ranging from 5,000 - 7,000 lbs. It offers integrated sway control as well as weight distributing properties. It only requires that you add a hitch ball to…
view full answer...With an as-loaded weight of about 5200 lbs, your tongue weight will be somewhere in the 500-800 lb range. Because it's a travel trailer, you'll certainly want to go with a w/d system with an integrated sway control because a travel trailer is…
view full answer...The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13534 is not rated for weight distribution systems according to the manufacturer. Most Class III hitches are but there are exclusions and this is an exclusion. I've linked the…
view full answer...Since the Tuson Electronic Sway Control System #335TSC-1000 will activate either side of the trailer brakes as needed to stop sway and the Curt True Course #C94VV instead applies them both at the same time and does a better job sensing and stopping…
view full answer...Since your current lamps are surface mounted, you'll have some more flexibility in choosing a lamp. Going with an LED lamp is a great idea, brighter light while using a fraction of the electricity. It's not too often you can have your cake…
view full answer...