Pro Series Weight Distribution PS58442 Review Video

Hey Mike, so what you are looking for is a weight distribution shank which we have with the part #17120 for an option that will allow you to have up to a 5-3/4 inch drop. Thankfully basically all of the weight distribution companies decided to make…

The Titan 60ZX7000 brake actuator is a Model 60 actuator, and you do have the correct part for a replacement master cylinder: - Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 So this will work…

I have a solution for you, but the heads and bars of weight distribution systems are not interchangeable between manufacturers. For this reason you're not going to be able to use the Curt #C17075 with your Pro Series weight distribution bars. If…

Eight inches from the ground to the bottom of your weight distribution shank would be fine for most situations but like you've experienced turning into inclined driveways can cause it to drag. Your trailer must sit pretty low to call for your…

Your weight distribution system uses a Shank #FA92-02-4100 that gives you a maximum 6-1/4" of rise and 2-1/4" of drop. I recommend using the Fastway Shank #FA92-02-4214. This will give you up to 10" of rise and 7-1/4" of drop with…

Yes, we have a direct replacement for your OEM 12-volt Shurflo 2088-422-144 fresh water pump, HydroMax RV Fresh Water Pump #P25201. The pump delivers 3-gallons per minute at 55-psi and will draw 10-amps maximum current. It includes a built-in…

We do have the BP 12 ETP you are looking for with the part #BA64FR.

The Replacement Head for Reese Weight Distribution System - Round Bar #RP58112 will work with all Reese round bars that insert and twist for installation. I've attached a photo to assist. As long as the top of your round bars look like #PS58440,…

I spoke with my contact at Horizon Global (parent company of Draw-Tite) regarding your older Draw-Tite Weight Distribution System. He stated that your particular system is comparable to the Pro-Series (also owned by Horizon Global) Round WD System…

Thank you for providing a photo of your Pro Series weight distribution hitch #49570. The assembly/installation instructions for this kit are linked for you for reference and they indicate the correct torque specs for the included hardware. It is very…

As you mentioned, the trunnion spring bars do come in various weight ratings. Increasing your weight distribution capacity will improve your weight distribution. Either the 1500-lbs trunnion spring bars, Item #RP58369, or the 1700-lbs trunnion spring…

I can tell by the picture you submitted that you have current Reese trunnion style spring bars by the square shape and the curved end I see on the bar. Since you have a tongue weight of 1,200 lbs then the bars you'd need are going to be the 1,000…