Review of Draw-Tite RV and Camper Hitch - Adjustable Frame Mount Hitch - 82201 Video

I attached a picture I received from Draw Tite that shows the dimensions of Draw Tite hitch part #82201 that you are looking for.

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this…

While we do not carry any custom-fitted hitch receivers that will fit your Keystone Raptor toy hauler, we do have universal fits that will. For the best route, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide…

The spacing from the top of the flat end bracket to the center of the hole on the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR (CC-300) is 1.5".

The center to center measurement of the mounting bracket bolt-holes for the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR is 5-7/8". Additionally, there are two other bolts holes on the angle brackets that measure 3-1/8"…

The hitch opening of the Draw Tite hitch part #82201 that you referenced measures 6 inches from the main cross tube.

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide, #C13704 has brackets that will mount to the bottom of the frame. The square tubing sets within these brackets which extend toward the inside of the frame. If you have a…

Generally an RV bumper is designed to take lateral force but not the vertical force it would encounter from having skid wheels installed on it. The RV frame at the rear (near the bumper) is the best place to mount skid wheels. If there is a hitch on…

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 has brackets that are 10 inches long with mounting holes 8-1/2 inches center on center. The height is right at 5-1/2 inches tall. I've attached a video to…

For your 2015 Keystone Raptor Toy Hauler, I recommend looking into a frame mount trailer hitch like the Curt Adjustable Width Trailer Hitch Receiver #13703. This particular hitch is designed for use on RVs and trailers and can be adjusted to fit…

I would be happy to compare the Road Armor, Dexter E-Z Flex, and MORryde equalizers you were looking at for your Jayco Eagle 325BHS. First things first each of these kits are designed to replace equalizers that measures roughly 6" between the…

Thanks for reaching out! I recommend checking out the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR for your travel trailer. Hitches like this are universal fits so you just need to make sure the frame of your trailer is in the…