Buyers Products RV and Camper Universal Receiver Hitch Review Video

You will need to have the chains on a Strait-Line weight distribution system straight up and down. There isn't a range of angles at which the chains can hang but I would not place the brackets off by more than 1/4 inch of where they are supposed…

Ideally, you would want the chains to be straight up and down. A slight angle is permissible. What I recommend is to change the chain hanger type being used. There are 2 options. First we have a type that bolts to the side of the trailer frame,…

The distance from the bottom of the square mounting hole to the top of the bracket on the Curt RV Bumper 2" Trailer Hitch Receiver part #E-100 is 1-1/8". I have attached a photo of this measurement for you. In order to make this work with…

For a cargo carrier that you'll be using on the back of a trailer you will need a fixed carrier as opposed to a folding one to have the best stability. There are a couple options for a fixed cargo carrier with a ramp for you. I recommend the…

The max towing capacity that the Buyers Products RV Universal Receiver Hitch #3371804060 has is 3,500 lbs. If the weight of the vehicle is under that and your application also has the needed weight capacity you'd be good.

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this one…

There's no reason you couldn't install the Buyers Products RV Universal Receiver Hitch #3371804060 above the rear bumper instead of down below it.

The Curt bumper mounted receiver part #E-100 will serve that purpose. The receiver itself provides a 3500 lb towing/ 350 lb tongue weight capacity. This assumes that the 4 inch bumper on your RV has sufficient capacity to safely tow the towing/tongue…

To add a receiver hitch for a bike rack you'll actually connect the hitch to frame of your RV and not use the bumper as most aren't rated to hold the weight of a bike rack and bikes. You'll need to measure from beam to beam to see what…

I cannot make a recommendation for pulling a trailer behind another trailer. I know it is done, but there are many things to take into account when thinking about this endeavor. You will need to contact the trailer manufacturer to see if the bumper…

There's no reason you couldn't install the Curt Hitch part #E-100 with the hitch opening above the bumper that you plan to install the hitch onto. I spoke with my contact at Curt and he confirmed that this would be just fine. We had a…

I am not really sure what you are trying to do but you can install a trailer hitch on the rear of a trailer. There are two different kinds of trailer hitches for trailers, frame mount and bumper mount. The frame mount hitches are much stronger but…