bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Round
  5. LED Light
  6. Red
Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens

Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens

Item # STL42RB
Retail:$24.33
Our Price: $15.94
You Save: 34%
Trailer Lights
Shipping Weight: 0.33 lbs
Add to cart
In Stock
Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens Recessed Mount STL42RB
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong plug. Great Prices for the best trailer lights from Optronics. Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens part number STL42RB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (327)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - STL42RB

  • Tail Lights
  • Round
  • LED Light
  • Red
  • 4 Inch Diameter
  • Recessed Mount
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong plug.


Features:

  • Red round trailer light serves 3 functions on trailers
    • Stop light
    • Tail light
    • Turn signal light
  • Sonically sealed, waterproof housing and lens unit is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable polycarbonate lens and housing
  • Red lens over white LEDs
  • Mounts on trailer with built-in flange - hardware not included
    • Requires a 4-1/2" round hole for installation
  • Accepts industry standard 3-prong plug (A45PB and A47PB - both sold separately)
  • DOT compliant


Specs:

  • Dimensions: 5-1/2" diameter x 1-15/16" thick
  • Distance between mounting holes (center on center): 4-1/4"
  • Diodes: 10
  • Power draw at 12.8V:
    • Stop/turn: 0.413 amps
    • Tail: 0.0.26 amps
  • LIfetime warranty on LEDs


Manufacturer Cross Reference
Light will work as an exact replacement for:
  • Truck Lite # 44326R
  • Grote # 53292
  • Peterson # M418R-2

Optronics STL42 Series 4 Inch Round LED Light with Mounting Flange Diagram

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.



STL42RB Optronics LED Trailer Tail Light - Stop, Turn, Tail - Waterproof - 10 Diodes - Round - Red Lens

Alternate part number: STL-42RB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens - STL42RB

Average Customer Rating:  4.9 out of 5 stars   (327 Customer Reviews)

5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong plug.

by:

The trailer tail light fit perfectly on our 2011 Montana camper.
I would purchase the lights again!!



by:

All the trailer lights were OEM and fit perfectly



by:

I always find the right parts for my boat trailer. The service is great I like to keep a spare set of lights for my2008 Ranger trail trailer



by:

Used these to replace old lights on my horse trailer. Installation was easy and they are very bright. I had issues with a connector on my first order, but the second was just fine. I also had issues with one being dim, but found out it was my trailer plug. Once it was replaced, it was great! Would use these on another trailer if needed.



by:

Excellent replacement tail light



by:

I think they should work.



by:

Part fit perfectly and works great!!
Easy
to order and received part sooner than expected!
Recommend etrailer to anyone.
Thanks!!

Lamar

6/15/2023

Still working great. Would recommend to anyone!!



by:

Great service, great product



by:

I put these LED lights on my 1967 Scotty. They have a nice clean look, and show up so much better than the originals. The wiring process, with the plug in connections, was easy!



by:

Excellent quality of there product.



by:

Worked as should for 2009 Ranger bass boat trailer !



by:

Great lights, very bright and visible day and night, much much better than the factory bulb light. I have recommended them to our friends who have RV's
Thanks etrailer



by:

Lights are great and fit perfect in my ‘09 Z520 Ranger boat trailer. Only reason for the 4star rating is because some of LEDs went out in the first set I bought. Four of the ten diodes would be lit but very dim. Thought it might be a ground wire or something on my trailer. It was not. This happened about three years after I put them in. I guess for how easy/inexpensive they are, it’s a good value still.



by:

100 times better than the original lights I had with traditional bulbs. With the LEDs you can see them even better during the day. Which is nice to know that people can see me at all hours of the day.



by:

Arrived promptly and was packaged in a protective box with padding to protect it during shipment. This was the first time I ordered from the company. I found the stop lights to be a quality product and would order from etrailer again!

Joseph

1/30/2023

I used these lights in conjunction with a wig-wag flasher unit to build a Railroad Crossing replica for my model railroad train room. Works and looks great in the sun-blocker shades I built around each.



by:

On time ,fits my boat trailer and works as it should. Thanks for the quick service



by:

They look great and are plenty bright. Don't forget to get those wiring pigtails though. These do not have any way to connect without them. No external wires, just a 3-prong connection on the housing.

Bryan

11/3/2021

These have been a good replacement for the old incandescent lights. Still working great.



by:

Perfect fit, wiring as described! Perfect upgrade for our 60s Sears Tent Trailer



by:

Thanks... the light is perfect and at a great price. The other place wanted $26.00 for the same light and you charged much less. I highly recommend etrailer.com for parts.



by:

These are exact replacements for my 2009 RangerTrail trailer. Fit perfectly.



by:

Fit perfectly on my trailer and works g reat!



by:

nice lights



by:

These lights worked out great. good price too!
EZ install.

David

7/10/2020

Still working great!!



by:

Just what I needed for a perfect replacement on my boat trailer



by:

Very imprest with your service and follow-up to make certain the product arrived. Customer service is more important than the product in my opinion. (Recently bought a fully equipped 3500 ram dually Laramie longhorn truck-paid cash-and went to 3 dealership B4 I found a good service dept. Next purchase will be with this dealership regardless of price. Could probably get some of my needs cheeper thru Amazon but because of your service I will be dealing with you.


25
327
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Can Utility Lights in Trailer Run Off Running Light Circuit Through a Switch on an Aluminum Trailer
    Yes, you can run the switch power wire to a clearance light but the trailer would have to be connected to the vehicle with the running lights on for the interior lights to have power. Aluminum does not offer the best ground so if the lights do not work you may have to run a jumper ground wire to a steel component or the main trailer connector ground. I would try it first to see if there is any problem with grounding to the aluminum surface. A fuse is not needed though you could add one...
    view full answer...
  • Replacement Tail Light Assembly For 2005 Airstream Trailer
    We offer several lights and may have just what you are looking for that will fit your 2005 Airstream. Thank you for the photo of your lights. You will want to take a measurement to be sure you get a light that will match the housing you are installing it in. if you remove a light you may be able to get the part number of the light assembly. If you cannot find the part number you can measure the opening and mounting holes to make sure we get a light that will work. The light assembly...
    view full answer...
    Image 1 for Image 2 for
  • Is the Optronics Trailer Light # STL42RB Sold Individually
    The Sealed, 4" Round LED Trailer Stop, Turn and Tail Light # STL42RB that you referenced is sold individually. I attached a review video for you to check out as well.
    view full answer...
  • Replacement Option For Glo-Brite 9891-88 LED Trailer Tail Light
    We do have an option for you to replace your Glo-Brite 9891-88 LED trailer tail light. Based on my research this is a 4 inch round LED tail light that uses a 3-wire plug and fits in a 5-1/2 inch grommet. We have exactly that with the following light: - Optronics LED Trailer Tail Light # STL42RB This comes with the grommet, which has mounting holes separated on center by 4-1/4 inches, so the only other thing you will need is the 3-wire pigtail, and you can choose from a standard or right...
    view full answer...
  • Troubleshooting Running Lights Circuit on a Travel Trailer Tail Light Harness
    Since you have tested the 4-Way connector on your vehicle and it is working properly, it leads me to believe that the wiring of the lights is incorrect. You will want to make sure that the fuse for the running lights on the vehicle is not blown. It sounds to me like the lights you have only have two wires coming out of the back for wiring to the trailer connectors wiring. If this is the case then the red wire will connect to the yellow (left) and green (right) wires on the trailer lights....
    view full answer...
  • Does Sealed, 4" Round LED Trailer Tail Light STL42RB Also have Reflectors
    Trailer tail light # STL42RB has reflective properties but I recommend # STL43RBX. The mounting ring around this light is a reflective lens rather than just a black ring like with # STL42RB. I also recommend wiring harness # A47PB to plug into the back of the light.
    view full answer...
  • Need Amber Taillights Like the Sealed 4" Round LED Trailer Taillight # STL42RB
    When it comes to the Sealed 4" Round LED Trailer Taillights, # STL42RB, the amber version is part # STL42AB. I have included two short videos for you.
    view full answer...
  • Is there a Trailer Tail Light that Matches Peterson Back Up Light # 411SC
    We do not have an exact match for a red round tail light like the Peterson Back Up Light, # 411SC, that you have referenced that is a flange mount. The closest flange mounted lights are going to be the Peterson round tail lights # 431800 and # 432000. For a flush mounted light, you could use # 429800 which may be more what you are looking for. We also have the Optronics brand flange mounts # STL42RB or # ST47RB. They use wiring harness # A45PB.
    view full answer...
  • Will Each LED Taillight Need to Be Grounded Separately on Trailer
    When it comes to wiring an LED taillight like the Sealed 4" Round LED Trailer Stop, Turn and Tail Light # STL42RB with Pigtail Harness, # A45PB, the red wire is for stop and turn, the black for running lights, and the white wire will need to be attached to a clean and corrosion free bare metal surface on the trailer. As for a clearance light having two wires like the Rectangular LED Trailer Clearance and Side Marker Light, # MCL32AB, you will ground the white wire and connect the black...
    view full answer...
  • How to Connect the # STL42RB Tail Lights to a 1958 Trailer with 2 Wire Lighting System
    The 4 inch Round Sealed LED Stop, Turn or Tail Light, item # STL42RB, uses a 3 wire pig tail, item # A47PB or # A45PB, to connect to your existing trailer wiring. The plug on the pigtail plugs into the back of the tail light and is then hard wired to your trailer wiring. It sounds as if your original tail lights were grounded to the trailer frame through their mounting studs, so a third wire was not needed. When connecting the 3 wires from the 3 wire pig tail, you will ground the white...
    view full answer...
  • Replacement LED Tail Light For Pacific Trailer
    We have LED trailer lights available. If you have the dimensions of the light you want to replace that would help in finding the right replacement for your Pacific trailer. From my research I found that some of the Pacific trailers use part # STL42RB. This is a 4-inch round flange mount light that has 10 LEDs. It is a three function stop/turn/tail light. If you need a flush-mount light, we also have part # STL43RB. this is also a 3-function 10-LED light. If you are looking for an oval...
    view full answer...
  • Replacement Tail Light For Forest River Georgetown XL RV
    I'd be happy to assist you. It sounds like you need the Sealed, Flush Mount Tall Rectangle LED Trailer Stop, Turn and Tail Light, Grommet and Plug, 12 Diode # STL34RB but most of the pictures I see have round tail lights like the Sealed, 4" Round, LED Stop/Turn/Tail light, 21 Diode - Red # STL55RB. If this is not the correct part, then send me a photo with the measurements of the light and we will get you what you need. The numbers and letters that are actually printed on the light are...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Trailer Light And Mounting Bracket Recommendation
    The Optronics light, part # STL42RB, you are asking about uses the mounting holes in the included flange for mounting. This light features 10 Super LED lights and has a sealed, waterproof housing and lens kit. The mounting holes in the flange are spaced 4-1/4 inches apart center-to-center. We do have a mounting bracket, part # BK45BB, for a 4 inch light but the mounting holes are spaced 4 inches center-to-center. If you wished to drill the holes in the bracket to match the holes in the...
    view full answer...
  • Flush Mount Stop Turn and Tail Lights for a 1982 13 Foot Scamp Travel Trailer
    I did a bit of research on your trailer and the reflect-o-lite light that you mentioned. It looks as if they are surface mount lights that are 6-7/8 inch diameter. For a replacement you could use the 7 inch round Transit LED Stop/Side Marker/Tail Light, # STL90RB, to have a somewhat original appearance, with an upgraded LED light. You could also use a surface mount like the I recommend the Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR by Command electronics,...
    view full answer...
  • Newly Installed LED Trailer Lights Go Out When Brake Pedal is Pressed
    This sounds like a ground issue. Ground problems normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or brake light. Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free bare...
    view full answer...
  • Pigtail for Optronics #42 Series Trailer Lights
    The Optronics LED Trailer Tail Light # STL42RB comes with the light assembly only, but we do have the following pigtail styles to choose from: - Right Angle 3-Wire Pigtail # A47PB - Straight 3-Wire Pigtail # A45PB
    view full answer...
  • What Size Hole Should be Drilled to Install a 4 inch Optronics Clearance Light
    You would want to drill a 4-1/2 inch hole to install the 4-inch Optronics Trailer Light # STL45RB. You will also need a Straight 3-Wire Pigtail # A45PB to wire in the # STL45RB.
    view full answer...
  • Replacement Round LED Stop/Tail/Turn Light for 4-1/2-inch Opening
    It sounds like you are looking for a recessed-mount light such as Optronics Round LED Trailer Stop, Turn and Tail Light # STL42RB. This light has a 3-hole mounting flange that measures 5-1/2-inches overall diameter. The mounting holes are spaced on 4-1/4-inch centers. Other options in round red LED-type stop/turn/tail lights are shown on the link provided.
    view full answer...
  • Can Silverado with Separate Turn Signal Circuits be Wired to Taillights that are Combined
    We have taillight converters like the # RM-732 which will take a separate circuit setup like your Silverado has and combine them so that you can use the circuits on the lighting you have now that was designed for combined circuits.
    view full answer...
  • Will Optronics Trailer Tail Light # STL42RB Fit a 1974 Blair Horse Trailer
    I went out to the warehouse and pulled an Optronics tail light, # STL42RB to measure the back to determine the size hole you would need. The trailer would need, or you would need to cut, a 4-1/2 inch diameter hole. The lights will fit the 4-5/8 inch mounting hole. You would also need a pig tail harness # A45PB.
    view full answer...
  • How Does a Trailer Light Mount in the Buyers Products Light Box 337LB663
    The Buyers Products Tail Light Mounting Box - 4" Round Hole # 337LB663 is designed to be used with something like the Rubber Grommet for 4" Round Trailer Lights # A45GB and Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible # STL55RB. The light will snap into the grommet, which will then snap into the mounting box. The wires of the 3-Wire Pigtail for Optronics Trailer Lights # A45PB will need to be run through the small hole that is drilled into the box, but this can be a...
    view full answer...
  • Backup Lights Similar To the Optronics 4 Inch Round LED Trailer Light # STL42RB
    The closest backup light that we carry to the 4 Inch Round LED Trailer Light, # STL42RB, is the 4 Inch Round LED Backup Light, # BUL11CBX. This is a 4 inch round clear back up light that has an overall diameter of 5-3/4 inches and a depth of 1-5/8 inches. This light will require a standard 2 prong plug, # A45CB, and has a reflector on the mounting flange.
    view full answer...
  • Replacement Taillights, Wiring and 7-Way Connector for Car Hauler
    To fit the round 4-1/2 inch holes on your trailer for the rear brake lights you could use the # STL42RB as this will fit in that hole. For a pigtail harness you would also need # A45PB. For the side clearance lights you would need to enlarge the holes to 3 inch in diameter, use the # A55GB as a grommet and then use # MCL59AB for the lights and # A46PB as a wiring harness. For a replacement 7-way with 8 feet of wire for running new wire everywhere you would want the part # H20046. You...
    view full answer...
    Image 1 for
  • Correct Wiring Needed to Install Optronics Round LED Trailer Light
    To install the Optronics Round LED Light # STL42RB you can use the Optronics 3-Wire Pigtail # A45PB. This has the three 20 gauge wires for stop, turn, and tail light functions. The red wire is for stop and turn, the black for tail lights, and the white is the ground wire.
    view full answer...


< Previous



Do you have a question about this Trailer Light?


Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Kathleen M
Video by:
Kathleen M
Employee Jacob H
Video by:
Jacob H
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Hannah L
Updated by:
Hannah L
Employee Cole B
Installed by:
Cole B
Employee Andrew S
Installed by:
Andrew S
Employee Shane H
Installed by:
Shane H
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.