bing tracking image
Customer Service My Orders
Q & A Icon

Flush Mount Stop Turn and Tail Lights for a 1982 13 Foot Scamp Travel Trailer  

Question:

the trailer does not have any holes cut for lights just screw holes that can be filled if they dont match so exact size doesnt matter. I need flush moun, definitely want LEDs I have three wires will these work and do I need anything else? current lights are: relfect-o-lite 110-150 AE IASTL-68

0

Expert Reply:

I did a bit of research on your trailer and the reflect-o-lite light that you mentioned. It looks as if they are surface mount lights that are 6-7/8 inch diameter. For a replacement you could use the 7 inch round Transit LED Stop/Side Marker/Tail Light, # STL90RB, to have a somewhat original appearance, with an upgraded LED light. You could also use a surface mount like the I recommend the Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR by Command electronics, which would be large enough to cover the original mounting location.

If you wanted to install a flush mount light the Sealed, 4" Round LED Trailer Stop, Turn and Tail Light, # STL42RB, would work well but would require cutting a hole in the trailer body to flush mount the light. This light requires a 3 wire pigtail, # A45PB or # A47PB, for wiring the light.

expert reply by:
0
Bob G
Ask The Experts a Question >>

Products Referenced in This Question





Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

Review of Command Electronics Trailer Lights - LED Tail Lights - CE86FR
Review of Command Electronics Trailer Lights - LED Tail Lights - CE86FR - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>