Will Each LED Taillight Need to Be Grounded Separately on Trailer
Question:
Looking at an LED tail light - it says it comes with 3 wires - on my left of the trailer it has the yellow for stop and turn and brown for running - so how do I match up to the 3 wire LED? And then for a clearance light - my trailer only needs one wire, brown, for running lights - so how does this match up?? And does each LED need to be grounded separately??
asked by: Larry D
Expert Reply:
When it comes to wiring an LED taillight like the Sealed 4" Round LED Trailer Stop, Turn and Tail Light # STL42RB with Pigtail Harness, # A45PB, the red wire is for stop and turn, the black for running lights, and the white wire will need to be attached to a clean and corrosion free bare metal surface on the trailer.
As for a clearance light having two wires like the Rectangular LED Trailer Clearance and Side Marker Light, # MCL32AB, you will ground the white wire and connect the black wire to your running lights.
So to answer your question, yes, you will want to ground each taillight separately.
Products Referenced in This Question
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector- 3 Diodes - White Base - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Non-Submersible Lights
- LED Light
- 4L x 2W Inch
- Amber
- Optronics
more information >
Product Page this Question was Asked From
Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Shop: Optronics Armored LED Clearance and Side Marker Light - 6 Diodes - Steel Housing - Red Lens
- Shop: Optronics Armored LED Clearance and Side Marker Light - 6 Diodes - Steel Housing - Amber Lens
- Q&A: Recommended Wire Gauge for Installing Optronics LED Type Trailer Tail Light STL211RCB
- Video: Optronics GloLight Trailer Lights Manufacturer Review
- Shop: GloLight Uni-Lite LED Clearance or Side Marker Light with Grommet - Turn - Round - Amber Lens
- Video: Optronics Rubber Grommet Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL110AKB Review
- Video: Optronics Trailer Lights - Clearance Lights - STL175AMFB Review
- Shop: Trailer Wiring
- Q&A: Standard Color Code for Wiring Simple 4 Wire Trailer Lighting
- Shop: GloLight Uni-Lite LED Clearance and Side Marker Light - Submersible - 2 Diodes - Round - Amber Lens
- Shop: Rubber Grommet for 4" Round Trailer Lights - PVC
- Shop: GloLight LED Backup Light for Truck or Trailer - Submersible - 21 Diodes - Round - Clear - Qty 1
- Shop: Vehicle Lights
- Shop: GloLight LED Trailer Tail Light - Stop,Turn,Tail - Submersible - 21 Diodes - Round - Clear Lens
- Search Results: heat shrink
- Search Results: wiring
- Video: Optronics Trailer Lights - Tail Lights - STL101RCFB Review
- Search Results: 3 wire
- Search Results: glolight
- Q&A: Troubleshooting Trailer Brake Lights Not Working When Connected To 2000 Chevrolet Silverado
- Q&A: Backup Lights Similar To the Optronics 4 Inch Round LED Trailer Light # STL42RB
- Q&A: What Size Hole Needs to Be Cut To Install the Sealed 4 inch Diameter Optronics Light STL42RB
- Q&A: What is the Power Draw of Optronics LED 4 Inch Round Trailer Tail Light # STL42RB
- Q&A: What Size Hole Should be Drilled to Install a 4 inch Optronics Clearance Light
- Video: Deka Wiring 16-3B-1 Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL121AK9PVG Review
- Article: Trailer Wiring Diagrams
- Search Results: replacement trailer plug
- Search Results: trailer lights