Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
(564 reviews)
Price: $98.23
In Stock
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
Item # AKHD-545-35-EZ-K
Our Price: $98.23
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (564)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKHD-545-35-EZ-K
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub with Integrated Drum
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Easy Grease
- EZ Lube
- Pre-Greased
- 1/2 Inch Stud
- L44649
- L68149
- etrailer
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Zinc-enriched paint on drum adds durability
- Zinc-finished bolts resist corrosion
- Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- Bearings, races, grease seal, grease cap, and lug nuts are included
- QAI and CSA certified
Specs:
- Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Actual drum dimensions: 10" diameter x 2-1/2" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 4-1/2"
- Wheel studs: 1/2" diameter x 1-1/4" long
- Grease cap flange diameter: 1.99"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KBD2-545-19 AxleTek 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - EZ Lube - Pre Greased
Compare to Dexter 84546UC3-EZ
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased - AKHD-545-35-EZ-K
Average Customer Rating: 4.7 out of 5 stars (563 Customer Reviews)
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.by: Roderick07/22/2023
Hubs matched to my original Dexter hubs. The prices was more than 50% less than Dexter axles; well worth the savings.
Bearings came installed; made installation a breeze. Slide them on and put on retaining washer, nut and retaining bracket.
I’d buy them again (today) will re-evaluate in a year.
by: Jess12/11/2023
This is the trailer I built using your spindles and electric brakes.
It towed beautifully from Texas to Kansas City and back for the World of Wheels.
by: Robert08/31/2022
Easily installed... Pre-greased bearing... Should have come with new axel nut, cotter key and bearing washer, but didn't.. Used old ones...
by: George07/15/2023
Purchased a used 2016 Keystone Hideout Trailer and wanted to be sure it was safe going down the road. These four assemblies were clean, packaged well and fit as expected. We will be headed out to campsite next month and will update this review ONLY if their is a discrepancy, otherwise, we are very satisfied with our etrailer purchase.
by: Marcus05/22/2024
Part are great. Shipping was quick and communication was great. No issues with the transaction. Minus one start for less than adequate packaging for transport. I’ve had two orders. The hub that came with other items was in a box in a box. The other items were just loose in the box without protection. No damage noted, but the potential is there depending on the handling practice. Hub that cam skin was in its own box. Appreciate the reduced number of boxes, but this wasn’t sufficient. No damage to the part, but the outside of the.hub poked through the box, the plastic was pulled out and shredded and the hi. Protective cap was damaged.
by: Jeffrey02/12/2024
Pleased with the quality of these hub/drum assemblies. Bearings were nicely pre-greased. Kit comes with solid bearing hub covers and bearing buddy types with removable rubber grease plugs...your choice.
by: Jeffery03/28/2024
One of the lug nuts was damaged and could not be used. I would like a cotter pin and a flat washer included in this assembly.
by: Donald 02/12/2024
I think your a great company but my hub drum assembly was a little out of round.
This is probably from storage by the manufacturer.
Have great day! Don
by: James 04/29/2024
Product replaced OEM part exactly. product was fully lubed as advertised. Installation was simple.
by: John03/28/2024
I haven't received my leaf springs at the same time. I ordered them within minutes of each other. So I have to wait until next week now. Once I get things together I can make an accurate assessment. Probably the only gripe of mine is that I have to wait now. Thanks for the follow up.
by: John 05/15/2024
Very good quality and easy to install I highly recommend this company for all your trailer needs
by: Shannon04/29/2018
I ordered the hub and idler set, my trailer came with 15x5 hubs and I ordered 15x4.5 rims. Since they wouldn't return my rims I ordered the correct hubs from etrailer. Got my box only had one seal slightly damaged. Installing was a breeze and happy with my purchase... Website was very user friendly as my first plan was to do a 6lug but I talked myself out of it. Thanks etrailer good job, nice company to deal with.
by: Buck.04/15/2024
Fast service. Help us work through getting good replacement parts. Thank you.
by: Lawrence11/11/2023
I ordered an easy grease trailer hub and drum assembly to replace the one on my 14 foot cargo trailer which was damaged by a defective magnet. The one I ordered fit perfectly. Since it came pre-greased, it saved quite a bit of time because I did not have to pack the bearings and press in the seal.
by: Brian07/10/2023
Missing parts, one of the two kits I ordered was already opened an missing the caps
Rebecca N.
7/13/2023
It is a bummer that it arrived missing the grease caps. I will have our Customer Service team reach out to you.
by: Keith 03/20/2024
drums and brakes went together perfectly. Amy J was a big help.
by: Mike06/03/2017
This is my second order. I ordered for the rear axle first. The parts looked good. So ordered for the other axle. The seals are robust and double seal design. But the bearing are China bearings. Would have liked to seen timkin or the like but are serviceable. The break kit fit well and looks good. We will see how they do on my 2500 mile round trip thru the mountains with a small truck loaded on it. The operators both times were very friendly and knowledgeable about their products. Keep up the good work and I'll keep buying!
Mike
6/3/2018
Put about 3000 miles with zero issues. They performed better than expected. I have ordered several items since then and the operators are all knowledgeable and all ways willing to do what they can to ensure a proper order and that Im satisfied with my order
by: Allen09/11/2023
Received the hubs very quickly. They were well greesed and ready to go. They look well machined. I did have one lug nut that had something wrong with the threads. I might could have used it, but since it would not thread on by hand I did not want to try it since it might damage the stud. I went on line and did a chat with etrailer. Thier customer service is top rated. They shipped me out another lug nut. This is why I do business with etrailer. They understand the needs of the customer and understand the products they sell.
I installed the hubs this weekend and took the trailer for a test pull. Needed to adjust the brakes up a little, but all was well.
by: Albert B05/15/2024
13,737 miles to Fairbanks from Ft. Myers and bank, still going good.
by: David 02/07/2024
Service was great and the shipping was fast. As always etrailer out performs its competitors.
by: Walter 07/23/2023
Perfect fit for the corresponding e-trailer brake assembly. Even comes with lug nuts, but I didn’t use them because they are a size up from whats on the rest of my trailer wheels. Same thread, just different lug wrench size. Personally, e-trailer, I’d forgo including the lug nuts and instead, include the mounting hardware with your e-trailer brake assemblies.
by: Jimmy 05/09/2024
Great product
by: Jimmy 05/03/2024
Love these hubs
by: Robert08/17/2023
Came quicker than expected. Missing hardware though. Box was damaged.
Katrina D.
8/25/2023
I am sorry to hear that your order was missing the hardware. I see that our customer service department has sent you a reshipment. Once you receive your new order I would love to see your updated feedback.
Ben M.
9/5/2023
Got the order. Good to go. Adam took good care of me.
by: Artie05/21/2024
Pre assembled/greased bearings,awesome!
25
564
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Parts Needed to Add Brakes to 3,500 lb Trailer AxleFirst you'd want a hub to add brakes to your cargo trailer that has 3,500 lb axles. For that the most common solution is the hub part # AKHD-545-35-EZ-K. This fits 3,500 EZ lube spindles and has the very common 5 on 4-1/2 inch bolt pattern for wheel attachment. If instead you have a 6 on 5-1/2 inch bolt pattern you'd want the part # AKHD-655-35-EZ-K. Then for brake assemblies you'd want the self adjusting assembly kit part numbers # AKEBRK-35-SA. Then for a brake mounting flange you'd...
view full answer... - Reducing Overall Trailer Weight By Replacing Beam Axle with Timbren Axle-Less SuspensionA standard beam axle made for a leaf spring suspension will vary only slightly more in its actual weight, depending on its carrying capacity, than two Timbren axle-less systems of different capacities. This is because as weight ratings increase a beam axle tends to have a larger diameter and more steel, which makes it heavier. With Timbren kits there will be a bit less of a weight difference. For instance, Timbren 3500-lb-rated kit # ASR35HDS02 has a shipping weight of 152-lbs, while their...
view full answer... - Do Trailer Hubs # AKHD-545-35-EZ-K and # AKHD-550-35-K Fit Same SpindleBoth hubs you mentioned fit the same size spindle so they would be interchangeable, but since you want a 5 on 5 inch bolt pattern the hub/drum you'd want is the part # AKHD-550-35-K actually. I also attached a help article on converting a trailer to electric over hydraulic drum for you to check out as well.
view full answer... - Recommended Axle To Replace Damaged Axle On 60s Camper TrailerI have an option that may work for you, but we do not have a traditional axle that matches the dimensions you provide. Instead I recommend going with the Timbren Axle-Less Suspension system. There are a few different options depending on the axle rating of your current axle. For a 2200lb option we have the # ASR1THDS01 which uses Braking Assemblies # AKEBRK-35-SA, and Hub and Drum Assemblies # AKHD-545-35-EZ-K. For a 3500lb option we have the # ASR3500S05 which uses the same Braking...
view full answer... - Picking Out Replacement Hub for 1996 Elite Ski Boat TrailerActually both of the hubs you referenced will fit and work great as a replacement for what you have on your trailer currently. Since this is a boat trailer application I'd recommend the # AKHD-545-35-G-EZ-K since it is galvanized and will fight corrosion better than the # AKHD-545-35-EZ-K you mentioned as well.
view full answer...
- Parts Needed to Add Brakes to Trailer with 3,500 lb AxlesFor your tandem axle 2016 C and M trailer, the 3,500 lb axles make it easy to add electric brakes. You will need to use 10 inch assemblies. My recommendation is the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA for each axle. These assemblies will work well for your axles and are self adjusting. Then I recommend using the Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K...
view full answer... - How To Find Correct Replacement Hubs for 2015 Ranger Boat TrailerI have a few options for you to help with replacing the hubs on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the hubs based off industry standards. For example, a 3,500 lb axle uses L68149 and L44649 bearings like what comes with the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles part # AKHD-545-35-EZ-K. The other option would be to take the...
view full answer... - How To Match Up Hub And Bearings For KH71744 On TrailerWe will need some more information in order to track down a new hub to fit your assembly K-H 71744. Pull off your old hub and look for numbers stamped into the bearings. If you do not see the numbers then you will need to use 4" Carbon Fiber Digital Caliper # PTW80157 or similar tool to measure the spindle (see photo). You will also want to verify the weight rating/capacity of your axles. Now that you have the essential information you can click on the link I attached regarding trailer...
view full answer...
- Replacement Hub/Drum for Aluma Enclosed Trailer Based on the info you listed it sounds like you have a 3,500 lb trailer axle and your wheels have a 5 on 4-1/2 inch bolt pattern so for a replacement hub/drum that is pre-greased and ready to install if needed you would wan the Easy Grease Hub part # AKHD-545-35-EZ-K and you'd be set.
view full answer... - Picking Out Replacement Hub for Trailer with 3,500 lb AxleThanks for all of the info and pictures! From that I can tell you do have a 3,500 lb axle/hub since the spindle dimensions match a number 84 spindle. So for a hub/drum the # AKHD-545-35-EZ-K would be what you'd want or for an idler hub you'd want the part # AKIHUB-545-35-G-EZ-K.
view full answer...
- Problem with Adjusting Lippert Forward Self Adjusting Brakes As we do not carry the Lippert brakes, I cannot say for sure what is going on as I have not had the chance to mess with them before. However, if you had say an etrailer.com Left Hand Self-Adjusting Electric Trailer Brake Assembly # AKEBRK-7L-SA, I would say it is most likely one of two things. First, something has become disconnected on the brake. This does happen every now and then and can be confirmed by removing the hub/drum. If this has happened, you can most likely just reattach the...
view full answer... - Replacement Hub Bearing Kit for Tru Ryde 3.5K Brake DrumFrom what I found online, you have a standard 3500 lb capacity axle which uses a spindle compatible with a L68149 inner and a L44649 outer wheel bearing. If they're not marked as such on the side of the bearing cages, you can confirm this by using a digital caliper like # PTW80157 and measuring the inner diameter of your bearings. The inner bearing should have an inside diameter of 1.378 inches, the outer bearing would have an ID of 1.063 inches. If this checks out, the correct replacement...
view full answer... - Could Timbren Axle Less Kit Fit Triton Elite 101 TrailerThe Timbren axle less kit part # ASR1THDS02 that you referenced can install be bolting to the trailer frame or by welding to it. It is compatible with the Triton Elite 101 trailer frame you have as well. As long as your trailer had 3,500 lb axle hubs on it prior they would transfer to this kit as well. Otherwise you'd need new hub/drums with the part # AKHD-545-35-EZ-K. Your spindle would need to have had a diameter of 1.378 and 1.063 inch for the current hubs to fit the Timbren.
view full answer... - How to Determine GAWR of 2-1/2-Inch Square Axle By Using Bearing NumbersTrailer axles made from square tubing tend not to be weight-rated as consistently as round axles. In other words there is more potential variance in the weight rating of a square axle; two axles of the same dimensions could easily be rated differently. A 1-1/2-inch square axle could be rated for 1800-lbs, 2000-lbs or 2200-lbs. A 2-1/2-inch square axle could be rated for 3500-lbs or possibly more. You can get close to the axle rating if you know the bearings used in the hubs and/or the...
view full answer... - Will Timbren Heavy-Duty Axle-Less Trailer Suspension Fit 2009 Avan Aliner TrailerYes, the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 2,000 lbs # ASR2KHDS04 will fit your 2009 Avan Aliner. The system is universal and fits any frame width. This has a 2,000 lb capacity and works with 3,500 lb hub and drum assemblies like the # AKHD-545-35-EZ-K. Keep in mind, the Timbren Axle-Less suspension system may require additional support on your trailer. If your trailer does not have a crossmember above the spot where you want to install...
view full answer... - Troubleshooting Weak Electric Trailer BrakesUsing too small of wire to carry the brake circuit can cause a number of problems ranging from poor brake performance to the wires melting. I would recommend you replace your current wiring with the recommended gauge wire. We typically recommend 10 gauge wire. You should note that locking up trailer wheels is not an effective way to slow down a trailer. You would want your trailer brakes to brake hard enough that they would almost lock up but never lock up. There are several other reasons...
view full answer... - Parts Needed to Add Electric Brakes to Utility Trailer That Currently has Idler HubsThe first thing you'll want to do is make sure your axle has a brake mounting flange. If it's a 3500 lb axle, it should have one. Next, you'll want to pull one of your existing hubs and obtain the reference numbers from the inner and outer wheel bearing. Also, examine the grease seal and get the reference number off of that. If you can't read the reference numbers off the bearings or the seal, use a digital caliper to measure the diameter of the spindle where each bearing and the seal...
view full answer...
- What Size and Style Lugs Do Dexter 10 Inch Hub Assemblies Have?Based on the Dexter 10 inch hubs we carry, all have 1/2 inch diameter pressed in lugs. The screw in options are rare and only on a couple of the 12 inch drum assemblies we carry.
view full answer... - Replacement Bearings and Seals for a 2,900 Lb Axle on a 2013 Lance 1685 TrailerThank you for your axle serial number. I was able to use this to determine that you need an L68149 inner and L44649 outer bearing along with a 10-19 grease seal. For a complete kit we have the Bearing Kit for #84 Spindle part # BK2-100. If you want to replace the entire hub/drum assembly then you will need the etrailer Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K.
view full answer... - Axle Bearings Kit And Replacement Brake Assemblies/Drums for a 2020 Highland Ridge Mesa Ridge 26BHSThe Hub Bearing Kit # BK2-100 contains the bearings, races, grease seal, cotter pin and tang washer for one hub on your 2020 Highland Ridge Mesa Ridge 26bhs. The Seal Puller # PTW1219 and 7-Piece Installation Set for Bearings, Races, and Seals # PTW83020 will aid you in the removal and installation of the new components. If you find your brakes are worn we also have the Electric Trailer Brake Kit # AKEBRK-35-SA that is self adjusting like your original brakes. And the Easy Grease Trailer...
view full answer... - Correct Hubs-Drums and Brakes for Lippert 3,500 lb SpindleThe Lubed 4" Drop Spindle with Brake Flange for 3,500-lb Axle # LC12338, uses standard 10" diameter hubs and brakes, for which we have the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA. For the brake mounting hardware (nuts and lock-washers) you can use part # BRKH10B. The most common hub-drum assembly for this application is part # AKHD-545-35-EZ-K, with a 5 on 4-1/2 wheel bolt pattern. However, depending on the wheels you plan on using,...
view full answer... - Parts Needed to Add Brakes to 3,500 lb Trailer and Install Brake Controller in 2007 GMC SierraWe can definitely get your trailer setup with brakes as well as install a brake controller in your 2007 GMC Sierra as well. Since we basically know you have 3,500 lb axles on your trailer what you'll need is a set of hub/drums like the part # AKHD-545-35-EZ-K for if you have a 5 lug bolt pattern (you should) and then for brake assemblies you'd want the part # 23-26 for the left hand side and # 23-27 for the right hand side. From there you'll need to run wiring up to the trailer connector....
view full answer... - Karavan 2600 lb Single Axle Boat Trailer Electric BrakesTo add electric brakes to your Karavan US-2200-74-ST boat trailer, where Karavan has specified L44649 as the outside bearing and L68149 as the inside bearing, you will need the following parts. You can use the etrailer # AKEBRK-35-SA Electric Brake Kit including left and right assemblies. Add nuts and lock washers with part # BRKH10B. These brakes are self-adjusting and rated for use with axle weights up to 3500 pounds. There are lesser priced assemblies that are not self-adjusting. For...
view full answer... - EZ Lube Hub/Drum to Fit 84 Spindle part # TRU74FRThe etrailer Hub part # AKHD-545-35-EZ-K fits the 84 spindle you mentioned part # TRU74FR and has the EZ lube grease cap like you need as well. This hub drum comes with the very popular bolt pattern of 5 on 4-1/2 inch as well.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Chris R
Video by:
Zach D
Video by:
Jonathan Y
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
Test Fit:
Shane H
Test Fit:
Kevin C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
9/17/2022
Thank you for reaching out. I have sent this to our customer service team and they will be in touch about the missing pieces.