Flange Wheel Nut - 5/8"

See what our Experts say about this Dexter Accessories and Parts

• Will 4.75 Pilot Hole Fit with 4.75 Hub for the Dexstar Dual Wheel with Offset # AM20783
  Generally if the hub has studs on it then it is stud piloted but if you secure the wheel to the hub using bolts then it is hub piloted. Since you are using dual wheels it changes things a little bit. The Dexstar Dual Wheel with Offset # AM20783 that you referenced is designed to fit on a dual wheel setup that is hub piloted. This means that the studs come through the back side of the hub and extend through both wheels and you use a 5/8" flange nut, like part # 95188, to secure it. Hub...
  view full answer...
• Does Dexstar Steel Dual Trailer Wheel # AM20790 Require Flange Nuts
  With the Dexstar Steel Dual Trailer Wheel # AM20790 Dexstar requires the use of flange nuts in the size of 5/8"-18 like part # 95188. I can't recommend an acorn style of nut.
  view full answer...
• Flange Lug Nut Recommendation for Trailer Wheel that is for Wheel Piloted
  For trailer wheels that are wheel piloted like it sounds like you have what you'd need is a flange wheel nut like the part # 95188 which is for stud diameters of 5/8 inch.
  view full answer...
• Recommended Trailer Wheel Compatible with 2015/75R-17.5 Tires
  The Taskmaster Vesper Steel Modular Trailer Wheel # TA65VR will not work with your Goodyear Tires because it is the incorrect size. This wheel is 16 inches and your tires call for a 17.5 inch wheel. For that similar look your will instead need the Taskmaster Modular Wheel w/ +0.08 Offset - 17-1/2" x 6-3/4" Rim # TA35ZR. You will also need the Flange Wheel Nut - 5/8" # 95188 for installation to your lug bolts. I've also linked the page to all your 17-1/2 inch wheel options with the 8...
  view full answer...
• What is the Correct Lug Nut to Use with a Wheel Retaining Ring on Dual Wheel Axles
  As long as your dual wheel has a flat surface where the Flange Wheel Nut # 95188 would rest against, like what the Dexstar Dual Wheel # AM20790 has, then you would use this flange wheel nut in the place of a nut with a 90 degree cone. Attached is a review video of the flange wheel nut for you to check out. In the video we pull a wheel out to demonstrate the flat surface area the nut would install on. If you are using a wheel retaining ring, like the part # 33-52-1, then you would still...
  view full answer...
• Can Dual Wheel Trailer Change From 16-1/2 to 16 Inch Wheels
  You can change from 16-1/2 inch to 16 inch wheels for a dual trailer wheel set up. You will need a new tire size though as tires need to have the same inner diameter of the wheel in order to fit. So long as you have an 8 on 6-1/2 bolt pattern, you can use the following dual wheel 16 inch wheels. - Load Range E (3,100 lb Capacity): Provider ST235/80R16 Trailer Tire with 16" Silver Dual Wheel # TA95FR This is a hub-piloted wheels so you will need wheel nuts to mount them, 8 of the Flange...
  view full answer...
• What is the Overall Flange Diameter of Dexter Flange Wheel Nut # 95188
  I went to our warehouse and pulled a sample of Dexter 5/8-inch flange wheel nut # 95188 so that I could measure its dimension for you. The overall outside diameter of the flange (the widest part) is 1-9/16-inches. The overall length is 1-inch. These dimensions are shown on the linked photo that I prepared for you.
  view full answer...
  
• Is Dexter Flange Wheel Nut 95188 Sold Individually
  Dexter Flange Wheel Nut # 95188 is sold individually so you will need to order the specific quantity you want when placing your order. The nut has an inside diameter of 5/8-inches,18 threads per inch and it is shown in the linked photo.
  view full answer...
  
• Can Trailer With 10,000 lb Axles Switch from 16-1/2 to 17-1/2 Inch Wheels and Tires
  Yes, you can switch from 16-1/2 inch to 17-1/2 inch wheels and tires on your equipment trailer with 10,000 lb axles. You just need to make sure the wheels have the same bolt pattern and work with the wheel bolts size of your hub and you're good to go. For example, the Provider 215/75R17.5 Radial Tire with 17-1/2" Silver Mod Wheel # TA95ZR has a 4,805 lb capacity, an 8 on 6-1/2" bolt pattern and needs a hub with 5/8" wheel bolts. I have added a link below to our entire selection of 17-1/2"...
  view full answer...
• Lug Nuts Needed for a 16 Trailer Wheel
  If you are looking for lug nuts for the 16" Lionshead Steel Dual Wheel - 16" x 6" - 8 on 6-1/2 - 4.75" Pilot - Silver Item # LHHA420 that you referenced then you need the 5/8" Flange Wheel Nut # 95188. For a standard 16" wheel like the Dexstar Silver Modular Trailer Wheel # AM20760 you would need a 60 degree coned lug nut like part # CE11050. For a vehicle you may need different lug nuts as trailers can sometimes use different lug nut sizes than passenger vehicles.
  view full answer...
  
• Rotating Flange vs Non-Rotating Lug Nuts
  I spoke with one of my contacts at Taskmaster. I was advised that wheels like the 17-1/2 inch Taskmaster Steel Dual Wheel # 1750275WD4 can use any lug nut on them as long as they are flanged.
  view full answer...
• Flange Nut Recommendation for Provider ST235/85R16 Radial Tire w/ 16" Vesper Silver Dual Wheel
  To secure the Provider ST235/85R16 Radial Tire w/ 16" Vesper Silver Dual Wheel # TA46FR to your trailer you need a 5/8"-18 flange nut and for that I recommend part # 95188.
  view full answer...
• Lug Nut Nuts for Dexter 10K Axel
  For the Dexter 10K axles a 5/8" wheel nut # 95188.
  view full answer...
• Can Standard Lug Nuts be Used With the Taskmaster TA69VR?
  The Taskmaster Provider 215/75R17.5 Radial Tire w/ 17-1/2" Solid Center Wheel - Offset - 8 on 6-1/2 - LR H # TA69VR is designed to be used with and requires the use of flange nuts instead of the standard conical style lug nuts. Typically an 8,000 pound axle will use 5/8"-18 studs as the 1/2"-20 stud will usually denote a hub/drum that will be used on up to a 7,000 pound axle. With that being said, I recommend upgrading your hub/drum to go with this tire and wheel set-up. If you have brakes...
  view full answer...
  
• Difference Between Dexstar Dual Wheel Part # AM20783 and Lionshead Steel Dual Wheel Part # LHHA420
  The Dexstar Dual Wheel part # AM20783 and the Lionshead Steel Dual Wheel part # LHHA420 are two very similar wheels with a few key differences. They are both 16" diameter x 6" wide wheels with a 8 on 6-1/2" lug pattern. However, the Lionshead wheel has a 3,500 lb weight capacity whereas the Dexstar wheel only has a 3,100 lb weight capacity. Another noticeable difference is that the Dexstar wheel is made in the U.S.A. and the Lionshead wheel is not. In order to install either wheel you will...
  view full answer...
• What Size Lugs Do I Need for the 17-1/2 Inch Taskmaster Solid Center Wheel TA45ZR
  You will want to use a 5/8" lug for the Taskmaster Solid Center Wheel w/ -0.19 Offset item # TA45ZR. You'll need to use a 5/8" Flange Wheel Nut like item # 95188 to secure the wheel to your trailer's hubs.
  view full answer...
• What Are The Torque Specs for 5/8" Lug Studs and Flange Nuts
  It looks like you recently purchased some Kodiak Wheel Bolts # K58WB316 and 5/8" flange nuts # 95188 from us, so thank you for being a loyal customer! What you'll want to torque those to will depend on the construction of your wheels and the size of the lug studs. For steel wheels with 5/8" studs and flange nuts you'll want to use 275-325lbs/ft of torque when tightening your lug nuts.
  view full answer...
  
• Correct Lug Nuts for the Taskmaster Steel Dual Wheel # 1750275WD4
  The 17-1/2 inch Taskmaster Steel Dual Wheel # 1750275WD4 requires the use of a 5/8 by 18 lug nut that is flanged. This is found as part # 95188 on our site. The part # 6-118 that you referenced is designed for use on semi trucks with 22.5 and 24.5 inch wheels and has metric measurements so it may not fit as well depending on your mounting bolt size.
  view full answer...
• What Size Socket Fits Flange Wheel Nut - 5/8" Item # 95188
  I went out to the warehouse with a handful of sockets to see which size fits over Flange Wheel Nut - 5/8" Item # 95188. It takes a 1-1/8 inch socket. I have linked a video review of this nut for you.
  view full answer...
• Lug Hole Dimensions of 17-1/2 Inch Taskmaster Solid Center Wheel
  The Taskmaster Solid Center Wheel LT2524SP (discontinued and replaced by the part # TA45ZR) has a 5/8" lug hole size. You'll need to use a 5/8" Flange Wheel Nut # 95188 to secure the wheel to your trailer hub.
  view full answer...
• Spare Wheel for a 2014 Thor Chateau 22E Motorhome
  We have three different wheels available for your 2014 Thor Chateau 22E motorhome that will work but you need to verify your pilot hole size to determine the correct fit. I have no way of knowing what size you currently have. Dexstar Dual Wheel with 4.75" Pilot Hole item # AM20783 Lionshead Steel Dual Wheel with 4.75" Pilot Hole item # LHHA420 Dexstar Dual Wheel with 4.88" Pilot Hole item # AM20790 We only carry trailer tires so you will need to have a tire mounted by your local tire...
  view full answer...
• 16" Dual Wheel For Inner or Outer Mounting
  We were not familiar with the term "coin in coin out" but are guessing that you mean the wheel can be used as an outer or inner wheel. If so we have the Dexstar # AM20783 16" Dual Wheel. Steen wheel with 8 on 6.5 bolt pattern and 4.75" pilot hole, powder coated white on a hub piloted design using Dexter Axle # 95188 flange wheel nuts. Select # AM20783 for white finish with 4.88" pilot. If you need a different wheel spec' just email me back with the details.
  view full answer...
• Which Lug Nuts To Use On A 10K Dexter Axle
  The Trailer Wheel Lug Nut # 6-109 will not work with Dexter 10 K Axles, Instead you will need the Flange Wheel Nut # 95188. These lug nuts are commonly used on hub-piloted trailer wheels. The flange nut fits a 5/8 inch wheel bolt. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you in your towing endeavors.
  view full answer...
• Do I Need to Replace My Lug Nuts When Replacing Steel Wheels With Aluminum Wheels
  Unless your current steel wheels use a flange wheel nut like the # 95188, you won't need to replace the lug nuts when you switch to the Aluminum Hi-Spec Series 6 Trailer Wheel # AM22652B. With that being said, if your current lug nuts are showing signs of corrosion, you may want to consider replacing them. If you do need to replace your lugs, for 1/2"-20 lug studs I recommend using the Americana Trailer Wheel Lug Nut - Stainless Steel - 1/2"-20 - Qty 1 # AM26NR for 1/2 inch lugs or Chrome...
  view full answer...

Do you have a question about this Accessories and Part?