4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
(209 reviews)
Price: $29.19
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
Item # 18252
Our Price: $29.19
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (209)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 18252
- Universal Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
- 6 Feet Long
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with the included quick-splice connectors
- Bonded wires are color coded (see wiring configuration below) and labeled
- Included circuit tester helps ensure wiring is correct during installation
- Includes durable, molded-rubber, standard female output socket
Specs:
- Harness length: 72"
- Max amperage: 7.5 amps per circuit
- Wire gauge: 18
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use the included tester to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
18252 Tekonsha Pontiac Sunfire Wiring Harness with Pontiac Sunfire End 4-Pole Connector Kit and Circuit Tester - 6' Long
20252 Alternate
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2012 Ram 1500 without factory trailer connector
- 2010 - 2012 Ram 2500 without factory trailer connector
- 2010 - 2012 Ram 3500 without factory trailer connector
- 1992 - 1999 Oldsmobile 88
- 1980 - 1996 Oldsmobile 98
- 1980 - 1984 Oldsmobile 98 Sedan
- 1997 - 1997 Ford Aerostar
- 2005 - 2009 Buick Allure
- 2005 - 2009 Buick Allure
- 1985 - 1989 Chevrolet Astro
- 1985 - 1994 Chevrolet Astro
- 1990 - 1994 Chevrolet Astro Extended Body
- 1990 - 1994 Chevrolet Astro Standard Body
- 2005 - 2005 Lincoln Aviator
- 2005 - 2005 Lincoln Aviator without factory trailer connector
- 1977 - 1981 Chevrolet Bel Air
- 1995 - 2005 Chevrolet Blazer
- 1995 - 2005 Chevrolet Blazer
- 1999 - 2001 Chevrolet Blazer without factory 7-Way
- 1982 - 1986 Pontiac Bonneville
- 1982 - 1986 Pontiac Bonneville Sedan
- 1991 - 2004 Oldsmobile Bravada
- 1991 - 1994 Oldsmobile Bravada
- 1989 - 1991 Ford Bronco Full Size
- 1978 - 1979 Ford Bronco Full Size
- 1978 - 1979 Ford Bronco Full Size with Standard or Step Bumper
- 1963 - 1972 Chevrolet C/K Series Pickup
- 1963 - 1972 Chevrolet C/K Series Pickup 6 Foot Bed with Standard Bumper
- 1963 - 1972 Chevrolet C/K Series Pickup 8 Foot Bed - Deepdrop Bumper
- 1963 - 1972 Chevrolet C/K Series Pickup 8 Foot Bed with Standard Bumper See All Vehicle Fits
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Alternate product found
Customer Reviews
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps - 18252
Average Customer Rating: 4.6 out of 5 stars (209 Customer Reviews)
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.by: Vincent05/30/2019
2014 Smart fortwo
Thanks to the video I did not have a problem installing the trailer wiring on my 2014 Smart Fortwo.
Thanks
by: Tim C10/26/2019
Awesome product never any issues use along easy install practically don’t need instructions
by: Eric 05/22/2023
Chevrolet Corvette
This harness worked great for my Corvet te.
by: Michael11/07/2022
Worked great for 6 mo. Ish. I’ve had the right side wire become loose/break so occasionally the right side will randomly choose to quit working but (at least for me) that’s not a huge deal with how little I use my trailer. solid purchase overall.
Katrina B.
11/18/2022
I have contacted the manufacturer and the have suggested that the wiring harness should be checked for a good connection, it sounds like the harness may not be connected correctly.
by: Brian03/14/2019
First thing I noticed were the online videos that can be saved to a file. nice! also noticed the instructions for assembly of the tow bar was small and difficult to read, (my mechanic was crying throughout the installation) There were no instructions on the wiring kit installation, even a photo of the wire to wire color placement would have helped, but my mechanic went on line and got the photo from an outside source - thus the 4 stars, not five. - other than that it worked out very well, the products are solid, well made, and superbly engineered. everything was inside! thanks !
Mike L.
3/15/2019
We have a link to the installation instructions as well as some install videos on the product description page.
by: Timothy04/06/2023
Each trailer is the best. Very easy to order from. Also, Sherry was very helpful and friendly.
by: Russell04/03/2017
2006 Ford Focus
The installation documentation, along with the video aid, was very helpful and easy to understand. It helped a lot, and made the installation fast and easy. I like it a lot, and I appreciate the support I got on a minor issue which was easily and quickly taken care of.
Russell
4/4/2018
The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!
by: Johnny12/16/2018
2007 Ford Focus
This was a pain in the rear end. Wires were not labeled and the tester was useless. Had to go to online for some instructions (none included with kit). Took a long time to get it wired to the car.
Mike L.
12/17/2018
On the product page, we have a link to the instructions as well as a couple of install videos.
by: Tom08/23/2021
1990 Dodge Van
Took me almost a year to actually get to installing this on the van, but wanting to use the trailer was a strong motivator. Its just a basic wiring set with quick connect clips in a bag. The fact that I was installing this on an extended camper version of the van this was designed for complicated the install, but "fortunately" there were enough rust holes that I could drill where I need to drill. Wires were long enough for the job (exactly the length needed) and the clips came pre-filled with silicone grease. Nice. Came with no instructions, but the on-line installation video is *excellent* and guided me thru the entire process. Overall, it was a convenient way to buy and install a wiring harness on my older van. Only two minor complaints:
* Did NOT include a weather-proof cap for the plug, which hangs outside by the hitch. I took the one included with the wiring kit for my Suburu (from etrailer) since that plug is stored inside the vehicle.
* The 12v circuit tester did NOT work. Fortunately I had my own tester.
by: David06/01/2019
1984 Jeep CJ-7
I got a 4-wire harness to connect my jeep to a utility trailer. The harness worked perfectly.
The connectors were good--surprisingly, they were stuffed with noncorroding gel so that the jeep's wires are protected. There were no specific instructions for the hookup, but simply removing the taillight lenses showed which color wires to splice.
The supplied tester failed to function, but that wasn't a problem at all--I didn't really wish to poke additional holes into the wires anyway.
Took a half hour to complete.
by: Kyle03/23/2017
2001 GMC Sierra
Has held up great over a year so far. I recommend wrapping the wiring in electrical conduet to help make the set up last even longer like I have
Kyle
3/23/2018
Perfect!
by: Timothy09/17/2022
1992 Dodge Van
Over all good experience
Missed the bolt package in my delivery but it was sent out right away... Friendly customer service... Hitch went on without a hitch. Great product..I will use this company again.. Thank you
by: TJ06/27/2013
2006 Chevrolet Malibu
I watched the video online to install the wires and did it all by myself. Product arrived in good condition.
Tj
12/26/2014
No problems, whatsoever! Good product for the price. I especially loved the fact that one could watch the video online on how to install it. Thanks!
by: Matt F03/09/2020
Product as described and very easy to install. In my case it didn't work, because the original wiring on my truck apparently is bad and I couldn't figure out what was faulty, so I ended up getting another harness that plugs into existing tail light harness, which worked great.
by: John11/13/2021
The box of contents I received was partially damaged and the boxes inside not properly secured and wrapped and damaged inside.There was a hole in the box and am missing one elecrical connector. Everything else was O.K.
Jenny N.
11/16/2021
I will have our customer service team reach out to you.
by: Jeff G.06/10/2017
2005 Ford Focus
I installed this wiring kit along with a hitch. This was pretty easy to install, and the directions were easy to follow. The hardest part was pulling up the the liner in the hatch back area to get to the wires.
by: Tony 05/30/2023
Their customer service is amazing and within a few day my order was here.
by: Mike D.05/06/2020
I needed a hitch and wiring harness to pull a small trailer for hauling lumber. The harness was easy to install and has worked without any problems over the past year.
by: Stan05/24/2018
1998 Chevrolet Blazer
Only thing that needed to be changed was wire connectors. Type included with the plug are easy to install (no insulation stripping, just clamp) but are not reliable. Throw those away and use standard crimp butt splices. Plenty of wire included, so I cut to more convenient length, spliced, and taped 8 inches on both side of splice. Tester is a nice touch, save in your tool box after installation.
by: big chicken07/03/2015
2003 Ford Focus
Perfect & simple as one, two three then your done. Thanks etrailer
Super Fast delivery from etrailer 5 star*
Big C.
7/27/2016
Everything is still working great.100 satisfied with the hitch and all I purchased.
by: Stephen09/19/2018
Exactly what I was looking for. Great price and fast shipping.
Stephen A.
9/19/2019
Works great!
by: Gene08/15/2014
Your product was easy to install and works fine. However, one thing that I think would be a good idea, would be to include a set of installation instructions with the product. I didn't know that the metal tabs on the connectors had to be pushed all the way down before snapping the plastic hinge over the top of the tab. A friend of mine informed me of that.
by: Mike K05/24/2018
2013 Ford Edge
Worked perfect. I used it to extend the pigtail on my tow dolly. etrailer has great shipping & service. Have bought from them many times.
by: K Sally06/07/2017
Hummer H3
Everything was sent according to order and mailed extremely quickly. Product was easy to use on a Hummer H-3 for a trailer hitch.
25
209
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- How To Convert Euro 7-Pin to US 4-Way Trailer ConnectorThe brake and turn signal circuits on a Euro 7-Pin Trailer Connector are separate whereas the brake and turn signals circuits on a US 4-Way Trailer Connector are combined. Therefore, you'll need a converter if adapting from the 7-Pin to a 4-Way, the Roadmaster Brite-Lite Wiring Converter part # RM-732 is what I recommend. This will wire directly into a 4-Way like the 4-Pole Hardwire Kit with Circuit Tester part #18252.which comes with a circuit tester that you will need as you can't simply...
view full answer...
- Replacement Installation Hardware for Draw-Tite # 36105 on 1985 Chevy Caprice Station WagonWe can certainly help you with that! You'll need the replacement hardware kit, part # RHK. Follow the link I've provided. When you're on the product page, type the part number # 36105 and the manufacturer Draw-Tite into the proper fields. Hitch installation hardware is a one-time use item only. If you'll be using the hitch for towing, you'll want to check your owner's manual to determine the towing capacity. You'll need the following to complete your towing system: 4 pole trailer connector,...
view full answer...
- Installing 7-Way Connector On 2004 Ford ExpeditionIf you have a 4-way connector at the rear of your 2004 Ford Expedition, you will need to use an adapter to give you a 7-way connector. I recommend using the Hopkins Adapter 4 Pole to 7 Pole and 4 Pole, part # 37185. As the enclosed photo shows, you would plug this into your existing 4-way connector and with additional wiring have a 4-way and 7-way connector. If additional wiring is needed when installing this adapter, I recommend using our jacketed, 2-wire 10 gauge wire, part # 10-2-1....
view full answer...
- Recommended Proportional Brake Controller for 1964 Chevrolet C/K Series PickupTo install a brake controller in your 1964 Chevy C/K Series pickup, you will need the install kit # ETBC7, the 4-pole trailer connector kit, part # 18252, and a brake controller. While we offer many different brake controllers, I would recommend the proportional-type controller by Tekonsha, the Prodigy P2, part # 90885. This proportional controller has an internal sensor that can detect how quickly and at what intensity the tow vehicle is braking, and will send the appropriate amount of...
view full answer... - Hitch and Weight Distribution Recommendation for 1972 International Trucks Scout II with Step BumperYou raised some great questions.When a trailer hitch like the Curt Class III # 13580 says "Not Rated for Weight Distribution" it means that the hitch cannot be used with any style of weight distribution (WD) system. This could be due to the size of the brackets on the hitch. (In this case, the brackets are very narrow where they mount to the truck frame.) Another reason may be that the manufacturer has tested the hitch with WD and found that either the hitch or the vehicle did not perform...
view full answer...
- Curt Hitch Recommendation for a 2000 Chevy Corvette Convertible with Quad Tip ExhaustYes, since the quad tip exhaust you have on your 2000 Chevy Corvette is part of the stock exhaust system the Curt Hitch part # C11034 that you referenced would work for you. For trailer wiring you would want the # 18252, for a ball mount # C45521, # A-82 for a 2 inch ball, # A-80 for a 1-7/8 inch ball
view full answer... - Will the Curt Class III 2 Inch Hitch # 13412 Fit a 1985 Jeep CJ-7 with a 20 Gallon Gas TankI spoke with my contact at Curt and he said that the Curt Class III 2 Inch Hitch, part # 13412 will fit a 1985 Jeep CJ-7 with a 20 gallon gas tank. I am including a link to the installation instructions for the Curt hitch. You may also be interested in purchasing the following products to complete your towing setup: Draw-Tite Ball Mount, part # C45030 Pin and Clip, part # PC3 Tow Ready 2 Inch Hitch Ball, part # 19247 Tow Ready 1-7/8 Inch Hitch Ball, part # 19260 Draw-Tite Wiring Harness,...
view full answer... - Trailer Hitch Recommendation for a 2005 Chevrolet Mailbu Maxx for Use With an Allen Bike RackThe only hitch made for your Malibu is the Curt Trailer Hitch, # 12280. It is rated for 350 pounds of tongue weight and 3500 pounds of towing. This is a Class-2 hitch with a 1-1/4 inch receiver opening. You will need to make sure the bike rack you plan to use fits in a 1-1/4 inch receiver. If you plan to tow, you will need a ball, like # 19258, and wiring # 18252.
view full answer... - Trailer Wiring Harness For A 2005 Ford F-350 Super Duty With Spliced WiresThe 4-Pole Hardwire Kit with Circuit Tester # 18252 will splice into your existing wiring on your 2005 Ford F-350 Super Duty. This wiring harness will power your trailer's signal lights. The tail light, stop and turn functions are printed on the wires. The wire is 18 gauge bonded wires. If your 2005 Ford F-350 Super Duty has a factory 7-way you can use The 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End # HM40975, which will give you both the 7 round and 4 flat...
view full answer... - Is There A Wiring Adapter For Tekonsha Prodigy P2 For a 2010 Ford Expedition? The Wiring Adapter # 3035-P will allow you to simply plug in the Tekonsha Prodigy P2 # 90885 on a 2010 Ford Expedition that came with either a factory 4-way or 7-way. If the truck does not have any of the factory wiring the controller will have to be hard wired in with the Wiring Kit # ETBC7 and a 4-Way # 18252.
view full answer... - What are the Weight Capacities of Curt Trailer Hitch # C12225 for a 2003 Pontiac Grand PrixThe Curt Trailer Hitch, # C12225, has a tongue weight capacity of 350 pounds and a gross trailer weight capacity of 3,5000 pounds. This is a Class I hitch with a 1-1/4 inch receiver opening. I have included a link to the instructions for this hitch below. You may also be interested in the 4-Pole Hardwire Kit Including Circuit Tester, # 18252, which will provide you will a 4-flat trailer connector at the rear of your vehicle.
view full answer... - Parts Needed To Tow a Towmaster Trailer with Electric Brakes with a WinnebagoThe Dexter Predator brake controller # 58-8 would be a good fit to power the trailer brakes on your Towmaster trailer. You would need to hard wire the brake controller to the Winnebago, connecting the wires coming from the back side of the brake controller as follows. The brake controller wire functions are: White: Ground, attached to a clean piece of unpainted metal. Black: 12v lead, attached to the positive battery terminal on the Winnebago with a 40amp circuit breaker. Blue: Electric...
view full answer... - Could 4-Way Get Tapped Into Diode Wiring of Jeep being Flat Towed for Trailer Towed Behind DinghySounds like you are trying to power the taillights of your trailer as it is being flat-towed behind an RV and Jeep. Connecting 4-way wires to the diode kit you have with something like the part # 18252 would accomplish this.
view full answer... - Will The Curt Class V Two Inch Hitch # C15445 Fit A 2004 Ford 350 Cab And Chassis?Yes, the Curt Trailer Hitch, # C15445, will fit on the 2004 Ford 350 Cab And Chassis. I have provided a link to installation instructions for you to review. To complete your towing setup, you may want to consider the following items. etrailer.com Ball Mount Kit, item # EBMK2416 Hitch Lock, item # e98880 4-Pole Hardwire Kit, item # 18252 Brake Controller Installation Kit, item # ETBC7 Brake Controller, item # 90195
view full answer... - Recommended Trailer Hitch and Wiring Harness To Pull Trailer with 5th Wheel It is certainly possible to pull a trailer behind a 5th wheel which is know as triple towing. In order to do this you'll first need to start with a trailer hitch if you don't already have one. For this, I recommend the Adjustable Width Trailer Hitch Receiver for RVs part # 13703 as it's our best, most popular option. In regards to wiring, the 4-Pole Hardwire Kit with Circuit Tester part # 18252 is what I recommend using which splices into the wires behind the tail light on the trailer.
view full answer... - Recommended Trailer Hitch and Wiring for 2006 Ford MustangThe trailer hitch I recommend for a 2006 Ford Mustang Curt Trailer Hitch Receiver part # C11312 which is a confirmed fit for V6 models. Then for a trailer wiring harness, the 4-Pole Hardwire Kit with Circuit Tester # 18252 would work well for you. In order to complete the towing setup, you'll need the Draw-Tite Drawbar part # 3592 (Use in the rise position) and the 1-7/8" Hitch Ball part # 19256 or 2" Hitch Ball part # 19258. This setup will give you a hitch ball height of around 15" which...
view full answer... - Recommended Trailer Hitch Receiver For 1989 Ford E-150 With Step BumperFor your 1989 Ford E-150 van with step bumper, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75703. This will give you a trailer hitch receiver that is close to flush with your step bumper for easy access. I've attached a photo to assist in the look and a video to assist in the installation. If you don't already have the trailer wiring, I recommend the 4-Pole Hardwire Kit with Circuit Tester # 18252 which will allow you to hardwire your...
view full answer...
- Is There a Trailer Hitch Available for the 1987 Ford Crown VictoriaI have a solution for you, but the Curt # 13707 is not a confirmed fit on your 1987 Ford Crown Victoria. Instead you'll want to use the Draw-Tite Max-E Loader # 41116 which has a 2" receiver and does not require any drilling into the frame of the vehicle for installation. To complete your towing setup you will need a few other items, like a wiring harness, ball mount and hitch ball. For the wiring kit you'll want to use the Tekonsha 4 Pole Hardwire Kit # 18252 (for combined 2 wire systems)...
view full answer... - Brake Control Installation Instructions for a 1996 Chevrolet C/K PickupYou will need to hard wire the Tekonsha # TK63VR, on your 1996 Chevrolet CK Pickup. Hard wiring is straight forward and fairly easy to do. We have instructions and a video that I have linked below for you. From the Brake controller here are your connections. White wire to negative battery post. Black wire through a 20-amp circuit breaker, item # PK54520 (included in kit), to the positive battery post. Red wire to the stop light switch wire behind the brake pedal, use a circuit tester,...
view full answer... - Brake Controller Recommendation for a 2015 Freightliner Coronado with Air BrakesFor your 2015 Freightliner Coronado with air brakes you can still use a regular electric brake controller if you have a brake light wire to splice into. The type of braking system on the tow vehicle will not determine the type of controller you can use. We do however have the Hayes Air Actuated Trailer Brake Controller # HA100400C which is designed for this application. A brake controller will have to be hardwired in since there isn't a plug and play harness for your truck. The first...
view full answer... - Troubleshooting Trailer Wiring on 2004 Ford Explorer Sport TracThe first thing I would check on the Explorer are the fuses (and relays) associated with its trailer wiring. I reviewed an online owner's manual but no information about the fuse box (power distribution box) is included so I suggest that you check the lid on the fuse box. Usually these will have a legend that tells you which fuses are related to towing functions. Check to make sure nothing has caused one of these to blow. A short in the trailer wiring could cause a fuse to blow. If all...
view full answer... - Installing Brake Controller on 1988 Chevy C70 TruckYour 1988 Chevy C70 isn't prewired for a brake controller, so you'll need to hard wire the controller. In order to do this, you'll need our brake controller installation kit, part # ETBC7 and a brake controller like the Tekonsha Voyager # 39510 Brake Controller. The kit includes a 7-way trailer connector, wire, hardware and circuit breakers you'll need to complete the installation. Due to the large size of the C70, I'd recommend getting an extra 20 feet of wire, which is sold by the foot...
view full answer... - Trailer Wiring Harness and Installation for a 2006 Ford Mustang GTIf you are trying to install lights like # STL8RB to your 2006 Ford Mustang the problem could be that the car has separate turn signal and brake lights while trailer lights have a combined turn signal and brake light circuit. On light # STL8RB, the white wire is ground, the green wire is stop and turn lights, and the brown wire is running lights. If you need to add trailer wiring to the car so that it can tow a trailer, you will need to use # 18252. I have included a link to the instructions...
view full answer... - Does the GM Brake Controller Adapter # 3015-S Fit on the 2005 GMC Safari VanThe GMC Safari Van is not equipped with brake controller wiring connector under the dash, like the GM full size truck and SUV is. Installing a brake controller on the Safari will require hard wiring a brake controller. We have a Brake Controller Installation Kit, item # ETBC7, that includes all of the wiring, circuit breakers and hardware needed to install a 7-Way trailer connector and a brake controller on your vehicle, as long as the factory 4-Way wiring is in place and working properly. We...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Sabrina W
Video by:
Alan C
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent S.
5/31/2020
Just fine.