Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at this spring seat for typical 3,500 pound round trailer axles with a 2 3/8" diameter. The spring seat is a necessary component of your trailer suspension system when mounted with a 1 3/4" or 2" wide leaf spring. It adds extra support and provides proper positioning for the axle. It's made from a durable steel construction. It would weld onto a 2 3/8" diameter axle which is a typical 3,500 pound axle. It sits on top of a 1 3/4" or 2" side leaf spring. The cutout on the flat side would surround the raised knob on the leaf spring to prevent turning in or shifting.
It simply provides that extra support and secure positioning for the trailer axle. Please note that two spring seats are required for each axle. A few measurements to go over with you real quick starting with the overall length. It's going to give us a measurement of 4" long. Overall width, it's going to measure about 1 7/8" wide. Height is about 1 1/4" tall, and this opening right here of this rounded area at the widest point, that's going to give us a measurement of about 2 1/8".
That's going to do it for today's look at the spring seat for typical 3,500 pound round trailer axles with a 2 3/8" diameter.
Average Customer Rating: 4.8 out of 5 stars (203 Customer Reviews)
The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal.
Thanks
Worked great for my camper axle
Spring perches as described
Great to get these high quality suspension parts to finish the axle modification on my travel trailer. The thick gauge of the metal makes it easy to weld the parts in place. I appreciate that they were available without having to buy a entire axle tube assembly!
Russ
6/6/2023
Sturdy material made this Seat easy to weld on, and it wont collapse under load. Glad they are available.
Mike L.
7/6/2023
Helpful Links
When I recieved the product I was ready and excited to get it installed. I had to do an axle flip to gain frame clearance on my custom jeep trailer build and needed new axle perch mounts. After I triple stitch welded the steel It was a perfect fit, and a year later no problems and holds great.
Perfect for installing updated axle in my 54 Chevy 3100. Thanks for the quality product and quick service.
Fit great exactly what I needed.
Everything looks good haven’t started p roject
So when the order arrived I received only one spring seat to do an axle and when I called customer service the young lady was rude and made me feel stupid for not seeing the fine print that said I only get 1/2 the materials to do one spring. This year I have vowed to stop doing business with these type of companies that charge high prices and use underhanded tactics to do business. I will not be returning this because they want me to pay shipping and I also will not be ordering anything else due to the way they treat customers like they have the monopoly.
Sierra K.
1/19/2022
A manager will reach out to you.
So far so good , installation went well, used it several times with a good load no problems yet
These worked like they should with the axle and u-bolts.
I bought springs, mounts and Tailight kit to fix up a rusty utility trailer. I cut, weld scraped and painted for the better part of a month in spare time. The springs and mounting instructions on e trailer are excellent. Only issue/shortcoming are the tail lights. Wire just pushes in and spring loaded strip holds them. I soldered and sealed the connection with silicone. So far that salt covered roads haven't hurt it in winter. The folks at etrailer are very helpful and prices are a good value.
Great price, arrived in a very timely manner, quality of materials is great. I'm very happy with mu shopping experience.
Exactly what was needed.
This product fit perfectly to the axle I had.
I didn't get a good picture but if you look closely you can see one of them.
I used the seats to reposition my springs from the lying under the axle of my TT to sitting on top of the axle. This gave me about 4.5 in of additional much needed ground clearance.
The cut and sizing of the seats was spot on and made for and easy axle flip.
I opted to use these and the U-bolt and plate kit instead of the Dexter spring over kit and saved about $50. I did the entire job start to finish in 3 hours.
One thing to note is that if you are looking to flip the position of your axles from the top to the bottom like I did. You are also going to have to lengthen your brake lines also.
Very satisfied with the product. I recently purchased 2 new dextor axles locally which came with springs mounted underneath. My application required the springs to be mounted on top of the axle and so I intended to remove the springs, flip the axles over, and bolt the springs back on. Unfortunately I realized this could not be done due to the axle tube being factory cambered (bent slightly upwards) and so i then searched and found these spring seats at a reasonable price and fit perfectly. It was by far easier to leave the original seats in place as guides and weld these new seats on. Also of note these seats are slightly larger than the factory Dextor seats. Thank you etrailer.com for a great product and quick shipping.
Product is an excellent, cost efficient way to get the ground clearance needed for your single axle camper. I gained 5.5 inches of clearance at the lowest hanging plumbing parts which allows me to pull my camper over water bars and roadside swales. Also, had to upgrade to a two-step staircase to accommodate access to camper with the new height.
Simple install if you have access to a welder. No other parts/materials needed.
These are an awesome upgrade to your trailer with 13" tires
These went on a Coleman tent trailer. This is the big one with all the stuff making it heavy. The old load range C tires look like it was run on the sidewalls of the tire as the trailer is heavy. The new load range D tires with the extra 15 psi (65) made the difference. Looks normal now. I also ordered the 3,500 axle leaf spring perches. Going to weld them to the top of the axle to mount the springs above the axle. This gains 4.25" lift. Needed as it drags just going out of the driveway lol
Rebuilding a home made trailer, we used it to haul large round bales. Needless to say was getting pretty rough. We are planning on using it to haul our UTVs now so we are down grading from a 15000 lb trailer to a 10000 lb trailer. We purchased 3 used 3500 lb axles and with the kits we purchased from you it has made the swap over very easy, everything fit prefect, Thanks
Trailer definitely rides smoother and better over rough roads.
2 3/8" spring pads, welded on. Were great for swapping axle over to axle under setup. Achieved 5 1/4" lift making my fifth wheel taller. Tall enough for a newer truck with taller stance.
Seems to be a perfect replacement to the original - maybe in the spring time I'll get them installed.
William
12/28/2020
Absolutely Fantastic
Have not installed it yet so I can't review the product. I can tell you that etrailer's customer service is top notch. I called about a shipping delay after I placed my order. They assured me it would only be a day and not a week like my order confirmation said. Called back the next day and my order was already shipped. Good people to do business with.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob T.
2/26/2024
Perfect!