Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs
(73 reviews)
Price: $265.00
In Stock
Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs
Item # RM-020
Retail:$296.99
Our Price: $265.00
You Save: $31.99
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (73)
- Q & A (0)
- Photos
Roadmaster Tow Bar - RM-020
- Fits Roadmaster Base Plates - Crossbar
- Fixed
- Coupler Style
- 5000 lbs
- Roadmaster
- Standard
- Stores Separately
- Steel
Simple and affordable: without all the bells and whistles, this tow bar is perfect for the occasional traveler. Super-durable with a reinforcing crossbar and arms that are sealed against the elements. Folds down for storage.
Features:
- Safely bring your vehicle along behind your RV
- Full-length crossbar provides maximum strength and support
- Foldable design makes it easy to store
- Strong, corrosion-resistant tow bar is built to last
- Sealed arms guard internal components against the elements
- Sturdy steel construction resists corrosion
- High-tech powder coat finish provides durability
Specs:
- Fits: most Roadmaster Crossbar-Style base plates
- Will not work with Direct-Connect base plates
- Can be used with either etrailer or Demco base plates with adapter (sold separately)
- Application: 2" ball
- Crossbar length: 33-1/2"
- 31" From center of mounting hole to center of mounting hole
- Weight capacity: 5,000 lbs
- Weight: 38 lbs
- Limited lifetime warranty
Note: When attached to Roadmaster Classic base plates, the crossbar on this tow bar will remain permanently attached to your towed car. If you want to be able to remove the crossbar, you'll need to use either XL or EZ Series base plates, and you will need to purchase Roadmaster's Quick-Disconnect kit (RM-201 - sold separately).
Fits etrailer and Demco Base Plates with Adapter
| Base Plate | Adapter |
|---|---|
| etrailer | Invisible: e99037 Classic: e98984 |
| Demco | Tabless: DM9523128 or DM9523036 Classic: DM9523036 |
What You Need to Flat Tow
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
020 Road Master Tracker A-Frame, Coupler-Style Towbar for 2" Hitch Ball - Vehicle Mount - 5K Rating
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs - RM-020
Average Customer Rating: 4.8 out of 5 stars (73 Customer Reviews)
Simple and affordable: without all the bells and whistles, this tow bar is perfect for the occasional traveler. Super-durable with a reinforcing crossbar and arms that are sealed against the elements. Folds down for storage.by: Dennis V.08/11/2014
I purchased both the parts of the tow system. I just purchase a Jeep Grand Cherokee (99) to pull behind our motorhome for week end trips. We just returned from the first week-end with access to a vehicle to move around the area, and short trips to town. It adds a wonderful dimension to the experience. This system allowed us to pull this vehicle with our motorhome, and I can say it pulled as if there was nothing behind me. It was quick to hook up, and easy to un-hook. My labor time to install was about 2 1/2 Hours, and went smoothly. This is a wonderful product, and works as desired. I have attached photos of the After installation, and the camp-site we stayed at, (proving we made it)
by: Good Basic Tow Bar04/13/2019
I've used this tow bar for my little Kia Rio5 Toad behind my 32' Itasca Class A motorhome. Reliable, easy to attach and remove, good construction. Had good experience recent trip from Seattle to Death Valley (7 percent grade in places!) and southern Arizona, over 4,000 miles round trip. It passed the acid test: driving I-5 south in Oregon, traffic suddenly came to a screeching halt ahead of us. We stopped with inches to spare from the car ahead of us. The TOAD stayed right behind, no jack knifing, etc. Good product.
Good Basic Tow Bar
4/14/2020
Great. Use it for towing all the time. Have a tent trailer and a small flat bed for dump runs and what not. Tip: make sure you pay attention to how the light wiring is supposed to run past the bar. Get some good large zip ties.
by: John09/08/2023
Quick "free" ship (24 hours), easy install (once substrate work on vehicle completed, only takes 10 minutes), quality appears excellent.
Still need "hitch up" restraint, safety cables and wiring harness.
by: Mike 03/25/2024
AS described and functioned as intended.
by: Russ04/15/2017
Ordered base plate/tow bar for s10 blazer. Good quality parts all necessary hardware is included instructions were easy to follow installed on my truck in about 2 hours. Ordering and shipping was fast and followed up by email from etrailer.
by: Jeff06/04/2017
Less than 5 miles on the tow-bar at this point, having completed only the "proof of concept" journey around the neighborhood. Simple bar, simple instructions. Keep the toad/dinghy brackets loose until the cross-bar is mounted and snugged - THEN tighten the toad mount brackets.
by: Tim04/23/2021
Fairly easy to install base plate. Left all bolts / nuts loose, slid tow bar in to align while tightening up. Ready for motorhome.
by: Crawford C.04/23/2023
Was disappointed that the cross bar isn't easily removable from the base plate. This totally negates the ability to use the twist and lock feature of the base plate to get a clean look on the front of the car when not towing. I will have to unbolt the cross bar every time in order to not have this ugly mess on the front of my toad! I wasn't made aware of this when ordering. Other than that, it tows and functions well.
by: Guy04/08/2022
I HAD A FOLD AWAY SOLD IT.. I HAVE TWO LOCKS TO GO WHERE THE PINS ARE..I WILL PUT THE PINS WHERE IT WILL HOLD IT UP.. THIS WILL STAY ON MY CAR.. I WILL GET A LOT OF USE OUT OF THIS..
by: Marcus03/18/2020
1) The unit arrived very quickly.
2) Instructions were not clear as to whether or not the spreader bar was required with the Roadmaster base plate I had previously purchased for the 2003 Explorer. There is no obvious to way for the pieces to attach without extensive drilling. This base plate is the style that allows us to remove the front pieces. But it dosen't seem to be compatible with the Roadmaster tow bar I bought. Clearly the tow bar attaches easily to the base plate but I was concerned about what additional stresses would be on the car frame ( if any ) without the spreader.
3) The clearance at the attachment points seemed a bit large and I expect chatter, but no real problem. My guess is that these points have extra clearance to allow for some twisting as the tow vehicle tilts one way while the towed vehicle tilts another.
4) All in all I expect the unit to work well but this review ( as most are ) was requested immediately. So at this time I have no over the road experiences to evaluate.
Marcus
3/19/2021
During the year since I purchased this tow bar we have towed the explorer from the Canadian border in the Rockies to the Mexican border in the southwest. Hundreds of those miles are over unpacked roads in the mountains. We have had ZERO problems. And would certainly recommend the product.
by: Don T07/07/2015
I already have a "StowMaster" tow bar for my 1999 Chevy Tracker, but found that it interfered with my 4X4's ability to approach and climb steep slopes; It also weighed over 60 pounds,reducing my carrying capacity and producing a harsh ride.
The "Tracker" tow bar weighs less than half as much and increases my approach angle while improving the ride.
etrailer described the "Tracker"bar perfectly, suggested the appropriate quick disconnect kit,offered it for less than anyone else and shipped it quickly!
Whatever my future automotive needs I WILL go to them first (and this comes from a retired professional career mechanic/shop foreman).
Don T.
7/6/2016
Okay! Its been a year now totalin around 7000 miles, covering 6 western states, on everything from freeways to dirt desert tracks and everything in between. I wouldnt change a single word of my original review. To add: there are no signs of wear or need for repair. Even the paint is still perfect. The most satisfying purchase of the year.Add another star!
by: Henry S06/13/2017
I purchased both the "Tracker" tow bar and the base plate kit, and had the base plate installed by my local mechanic. I was able to install the tow bar attachment plate to the base myself, using a 1/2" drive torque wrench. We've made several trips, some as long as 1200 miles, through mountains and flatlands, on interstates as well as US highways, State roads, and county roads, and have never had a problem with performance. We are very satisfied.
Henry S.
6/19/2018
Still working as designed, a year later. Im satisfied!
by: Clint 08/10/2023
Excellent. This is my second one. Use it for driveaway and put alot of miles on the first one. Lasted for 3 1/2 yrs and countless miles.
by: Tom04/14/2018
Works good after one year..i use bungee cord to hold bar up vertically on my kia car,then try yo line up to motorhome hitch ball. Takes some practice when you are alone,but the price and quality is good.
Tom S.
4/14/2019
Still working great, put on kia car yesterday to hookup and head north.
by: Shawn08/06/2022
The package was delivered fine and great timing. Missing four bolts but everything else was there. How in the world would four bolts be missing in something like this. That’s kind of ridiculous. Now I had to buy my own bolts so how does a person get credited for something so frivolous that should have not ever been forgotten .
Katrina B.
8/12/2022
Let me get you put into the right hands. I have sent your information over to our customer service department for them to get in touch with you about the missing bolts.
by: Robert 03/05/2020
I purchased the tow bar and base plate so we could flat tow our 2017 Ford focus. I was able to install the base plate myself in about 3 days only because I took my time.
Hooking up to our Motorhome is easy and we don't have any problems with the car going down the road.
When we get another vehicle I will get another Roadmaster Base Plate.
by: Louis G07/23/2019
Excellent fitting and strong tow bar that is insures safe and towing behind my RV.
Louis G.
7/24/2020
Excellent
by: Jack H.10/30/2016
This is a very good tow bar, and is the thirdroadmaster bar I have owned. My previous bars
were roadmaster falcon 2 bars. The tracker bar in a pain in the butt to hook up.
Save your sanity and buy a falcon 2, a breeze to hook up.
by: Dean01/30/2018
The Roadmaster Tracker Tow Bar mounts on the Roadmaster Plates very easily and really looks nice on my 2017 Jeep Cherokee limited.
by: Carl W.02/09/2015
Got the hitch and additional parts to connect to the base plate I had already purchased from etrailer. The installation took a little longer than I expected, but regardless, all of the parts were there and it fit perfectly!
Great products - heavy duty - quick shipping - all of the parts were there!
Thanks for making my purchase a great one.
by: Dennis03/18/2022
etrailer rocks. Very helpful helping me order what I thought I wanted. Tracker to bar and mounting acc. are very heavy duty and fit well. Thank you etrailer and Towmaster.
by: Mike H.04/20/2020
Cross Bar measurement was off ("NO" accident/damage to vehicle) it works great, not a problem using over the past year. They made OUTSTANDING effort to get it right, so We were able to take Tow Vehicle on the Trip.
THANK YOU etrailer
by: Steve 11/20/2021
Very fast shipping. I haven't installed product yet.
Steve
11/21/2022
This a a good solid tow bar that simply does the job.
by: Chris B03/26/2015
Haven't actually used it yet, but will for around 2 weeks in about 10 days. Could be a little awkward getting it lined up on the ball maybe. We'll have to wait & see. Seems strong enough though. It's heavy. Although it doesn't fold & stow on the car, it's easy enough to remove & it will fold flat for easier storing.
by: Richard H10/20/2016
Tow about 5K a month , probaly have 40k on it only issue I've had was swing bolt by hitch broke.
25
74
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar
- Can Roadmaster Base Plate Kit RM-521453-4 Be Used with Tracker Tow BarYes, the Roadmaster base plate kit part # RM-521453-4 that you referenced is compatible with the Roadmaster Tracker tow bar part # RM-020.
view full answer... - Most Inexpensive Tow Bar and Base Plates for a 2008 Jeep Grand CherokeeIt sounds like you're looking for a cost effective tow bar and base plate setup for a 2008 Jeep Grand Cherokee and if that's the case we have some great options. The most cost effective option would be to go with the Roadmaster Crossbar-Style Base Plate Kit part # 1427-1 so you could use the Roadmaster Tracker Tow Bar part # RM-020. There are no options to use the Curt Tow Bar on this vehicle.
view full answer... - Parts Needed to Flat Tow a Toyota RAV4 2004The owners manual of a vehicle is always the final authority for flat towing procedures. For your 2004 Toyota Rav4 if the owners manual does not state that a lube pump is required then you wouldn't need to use one. I found the article you referenced and the Rav4 that was referenced was an older model (1996) so the fit information would be different most likely. The first thing you will need to flat tow your vehicle is the correct base plate for your vehicle. For that you would want the...
view full answer... - Can I Flat-Tow My 1993 Chevrolet Geo TrackerI did some research and found that your 1993 Chevrolet Geo Tracker is able to be flat-towed or towed with all 4 wheels on the ground. You will want to check with your dealership as the 2WD and 4WD models vary as to additional parts needed to be flat-towed. The item you selected, RoadMaster Tracker Tow Bar, part # RM-020, would work as a tow bar for your Tracker. If you will be towing your vehicle often, I would recommend a non-binding tow bar like the Falcon All Terrain Tow Bar, part...
view full answer... - Base Plate Kit, Tow Bar, Safety Cables, and Light Kit Recommendations for a 1995 Jeep CherokeeWe have two base plate kits available for your 1995 Jeep Cherokee. Both base plate kits are only for models that do not have a brushguard. First is the Roadmaster Standard Base Plate Kit, # 1402-1. But if it were my Jeep, I would go with the Roadmaster XL Base Plate Kit, # 1418-1. The XL series brackets attach to the towed vehicle frame and provide attachment points for tow bars. The visible portions of bracket can be removed when not towing. Please note that trimming of spoiler, air...
view full answer... - Can a 2008 Honda CR-V be flat Towed Behind and RV Using a Tow Ready/Reese Tow Bar 63180I would actually advise against using Tow Ready tow bar # 63180 for a couple of reasons. First, this tow bar is rated for a maximum of 45 miles per hour which is fine for short hops around town but useless for highway use. And second there are base plates required, # 40602, but they are going to require major modifications to the bumper and need to be reinforced so professional installation is recommended. The other option is to use custom base plates # RM-521559-4 with an adapter # RM-025...
view full answer... - Inside Dimensions of the Replacement Swivel Collar # RM-900010-00I went to the warehouse and found that the Replacement Swivel Collar # RM-900010-00 measures about 1-5/8" on the inside. This part is a direct replacement for the Roadmaster Tracker Tow Bar # RM-020.
view full answer... - Will Draw-Tite Tow Bar Work On 2002 VW BeetleI do have an option for you but the Draw-Tite Tow Bar part # 63180 isn't designed to be used with base plate, the bracket that comes with is supposed to be welded to a steel bumper or you can bolt it to the core support with bumper removed in some cases. For a cost effective compatible setup, I recommend the Roadmaster EZ Base Plate Kit part # 521225-1 with Roadmaster Tracker Tow Bar part # RM-020.
view full answer... - Availability of a Roadmaster Base Plate to Reese Tow Bar Adapter for Flat Towing a 2004 Ford FocusIt is possible that you will be able to use the Reese tow bar with the Roadmaster base plates, # 52491-1. If it is the Tow Ready Tow Bar by Draw-Tite, Hidden Hitch, and Reese, # 63180, you will need Roadmaster base plate to Tow Ready tow bar adapter, # RM-025. In order to make the base plate arms removable, you will also need quick disconnects, part # RM-201. I have also included a link to our series of articles on flat towing a vehicle. You should keep in mind that the Tow Ready tow bar...
view full answer... - Parts Needed to Flat Tow a 1996 Toyota RAV4 Behind an RVIn order to flat tow your 1996 Toyota RAV4, all wheel drive with manual transmission, I have found that you will need to have a transmission lube pump installed. For other towing requirements for your vehicle, be sure to consult the owners manual. There are several other components that are needed to flat tow a vehicle starting with base plates. Base plates provide a safe and secure attachment point for a tow bar. You can use XL Base Plates, # 1142-1. For a tow bar, you will need one that...
view full answer... - Base Plates and Tow Bar Compatible with a 2003 Ford RangerWe do have two possible options for a 2003 Ford Ranger. First are base plates # 483-1, which will fit the XL and XLT models. Second is # 477-1 which will fit the Edge model with a tow hook. The base plates for a 1997 Ford Ranger, # 435-3, will not fit on a 2003 Ford Ranger. If you need a tow bar, I recommend the RoadMaster Tracker Tow Bar, # RM-020. With this tow bar, to make the XL extensions removable, you would also need Roadmaster Tow Bar Quick Disconnect Kit, # RM-201.
view full answer... - Base Plates, Tow Bar, Safety Cables, and Wiring to Flat Tow a 2007 Chevy Impala LTZYou will be able to flat tow your 2007 Chevy Impala LTZ using a tow bar. You will first need to install base plate kit # 523133-1 (only works on models with 3.5 liter motor). You will then need a tow bar compatible with EZ style base plates. I recommend the RoadMaster Tracker Tow Bar, # RM-020. (To be able to remove the EZ base plate front extensions, you will need to use Roadmaster Tow Bar Quick Disconnect Kit, # RM-201.) Next, you will need safety chains, or cables, and a light kit...
view full answer... - Base Plates and Crossbar Needed for Roadmaster RM-020 Tracker Tow Bar on 1992 Geo TrackerFor starters, you'll need a base plate kit like # 118-3 which is a fit for 2 door Geo Tracker models only. From the photo you provided, it appears you're missing the crossbar that the # RM-020 uses, unless you already have it an it just wasn't shown in the photo. A replacement crossbar is available as part # RM-025. The Tracker tow bar would typically be permanently installed on the vehicle, but it can be removed by removing the drawbars of the # 118-3.
view full answer...
- Modifications Necessary for Flat Towing 2003 Buick Rendezvous Behind RVAccording to my research, the 2003 Buick Rendezvous cannot be flat towed unless a transmission lube pump has been installed. This would hold true for either the FWD or the AWD model. We don't carry transmission lube pumps, but you should be able to find one easily by doing a Google search. The # RM-020 Roadmaster Tracker tow bar you referenced would work, as its 5000 lb capacity is sufficient to tow your Rendezvous. For a base plate, I'd recommend the Roadmaster # 3107-1. This base plate...
view full answer... - Parts Needed to Flat Tow a 2011 Jeep Wrangler Behind an RVThe first thing you will want to do is consult the vehicle owners manual to determine how the vehicle should be towed and if any additional equipment or special procedures are required. There are 5 items you will need to flat tow a vehicle. First you will need base plates. There are several options for a 2011 jeep Wrangler depending on the bumper you have. I have included a link to them for you. The next item you will need is a tow bar. If you go with Roadmaster base plates, the most...
view full answer... - Can the Roadmaster Quick Disconnects be Used with EZ Brackets on a 2009 Toyota Yaris 3 Door HatcbackTo complete the tow bar setup, you will need a tow bar, base plates and by your reference to part # 201, I take it you are wanting the quick disconnects. You mentioned you have the Roadmaster Tracker Tow Bar, part # RM-020, that is compatible with XL, EZ and Standard style Roadmaster base plate kits. Roadmaster EZ base plate kit, part # 521181-1, will work fine with both your Yaris and your Tracker Tow Bar. With both of these components, you can use the Roadmaster Quick Disconnect kit,...
view full answer... - 2004 Ford Ranger Step-Side Pickup 2 wheel Drive Base Plate FitmentThe base plate that will fit your 2004 Ford Ranger step side 2 wheel drive extended cab truck is the Roadmaster Tow Bars for the Ford Ranger, part # 483-1, I have linked the page below. Along with the base plate you may also need the following: Tow Bar # RM-020 or # RM520 Tow Bar Wiring # RM-154, # RM-155 or #RM-2120 Safety Chains # RM-645 or # RM-643 There are also various accessories available for Tow Bars, which I have linked below. If your 2004 Ford Ranger is the Edge...
view full answer... - Base Plates, Tow Bar, Safety Cables, and Wiring to Flat Tow 1991 Mazda Miata MX-5The first item you will need to flat tow your 1991 Mazda Miata are base plates. We carry two different options of base plates for your vehicle. First are the XL Plates, # 711-4. These have removable drawbars held in place with a pin and clip. With the drawbars removed the base plates are virtually invisible. For these, trimming of the spoiler, air damn, grille, or plastic fascia may be required for installation. The other option are Standard Plates, # 711-2. These are fixed brackets and...
view full answer... - Using the Roadmaster Tracker Towbar Part to Tow a Ford Ranger Behind Motor HomeThe Roadmaster Tracker Tow Bar, # RM-020, will work to connect the Ranger to your Motor Home, but you will need to have Roadmaster standard, EZ or XL base plates fabricated installed on your Ranger. If you can tell me the year of your Ranger, I would be happy to give you all of your base plate options.
view full answer... - Parts Needed and Procedures for Flat Towing 2000 Jeep WranglerClevis rings are meant for recovering the vehicle when it is stuck, not for flat towing the vehicle. The safest way to flat tow the vehicle is by using a base plate kit that attaches to the frame of the vehicle. For the OEM double-tube bumper, I recommend the Roadmaster EZ4 # RM-521424-4 base plate kit. For the U-channel bumper or single-tube bumper, use # 1420-1. The Tow Ready tow bar you referenced would limit you 45 mph, so something like the Roadmaster Tracker, part # RM-020 would...
view full answer... - What do I need to Flat Tow A 2001 Ford Explorer in the Least Expensive MannerI am not sure if you will have to disconnect the drive shaft. This varies from vehicle to vehicle and drive line packages within that vehicle. Consult the Explorer Owner Manual to see what will be involved in flat towing your Explorer. The least expensive flat tow route I would recommend is using the Roadmaster Tracker Tow bar, part # RM-020. You will also need base plates that attach to the frame of the Explorer and provide a mounting location for the tow bar. Roadmaster XL Base Plates,...
view full answer... - Recommended Adapter To Flat Tow 2003 Jeep Wrangler With D-Ring Bumper MountsWe do have just what you are looking for. For your 2003 Wrangler you will first need part # RM-035-1 for 1-inch D-rings and part # RM-035 for 3/4-inch D-rings.. These adapters attach to the shackle mounts when the D-Rings are removed, and will work with any Roadmaster tow bars that mount on a motorhome. The tow bar I recommend is the Tracker, part # RM-020.
view full answer... - What are the Dimensions of the Roadmaster Tracker Tow Bar Base BarI went out to the warehouse and pulled a Tracker tow bar # RM-020 to take the measurements you have requested. The overall length (D1) is 34 inches. The distance between the 2 outer holes on center (D2) is 30 inches. And the distance between the holes on center (D3) is approximately 1-1/2 inches.
view full answer... - Recommended Parts for Flat Towing 2012 Chevrolet Equinox with 36-Foot Georgetown MotorhomeFlat towing a vehicle behind a motorhome requires 5 basic components: a tow bar, safety cables, and a lighting solution, base plates and supplementary braking system for the toad. You may care to glance at the linked article that covers each of these in detail. We also always suggest checking your owner's manual for any guidance related to flat towing the vehicle. I recommend staying with one brand of base plate and tow bar since doing so avoids the added cost and complexity of the adapters...
view full answer...
Do you have a question about this Tow Bar?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Updated by:
Lindsey S
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Amanda K
Video by:
Kathleen M
Installed by:
Cole B
Test Fit:
Randy B
Test Fit:
Robert C
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Wayne R.
10/9/2015
Hi.......I read your review of the Roadmaster Tracker tow bar and am considering purchasing this model. I have to admit, a major consideration is the affordability of this model. The RV dealers in my area are quoting me prices in the neighborhood of $4000 to outfit my RV to tow my Honda CRV. Base plate, tow bar, wiring, brake assist,,,,the works. Way over my budget, so am wondering if there is a more economical way to tow my vehicle.I am thinking of asking how much to only install a base plate on the Honda.... then going with this tow bar unit. I can get magnetic lights to use when I tow again, trying to keep the price down. Is this tow bar easy to connect and disconnect? Any feedback greatly appreciated. Thanks....Wayne