bing tracking image
  1. RV Vents and Fans
  2. Ventline
  3. Vent
  4. Roof Vent
  5. No Fan
  6. 14W x 14L Inch
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Item # V2092SP-28
Retail:$88.26
Our Price: $55.60
You Save: 37%
RV Vents and Fans
Shipping Weight: 5 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank. Great Prices for the best rv vents and fans from Ventline. Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White part number V2092SP-28 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (662)
  • Q & A (0)
  • Photos

Ventline RV Vents and Fans - V2092SP-28

  • Vent
  • Roof Vent
  • No Fan
  • 14W x 14L Inch
  • White
  • Ventline
  • Manual Lift
  • 4-1/2 Inch
  • Plastic and Metal

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.


Features:

  • Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure
  • Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Polar White interior trim piece (or garnish) is included
  • Made in the USA


Specs:

  • Included garnish fits roofs 1-7/8" to 3" thick
    • Garnish leg length (depth): 2-1/8"
    • Garnish color: Polar White
    • Other garnish sizes are available (sold separately)
  • Cover color: white
  • Rough opening size: 14-1/4" wide x 14-1/4" long
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10-3/4" Open
  • 2-Year limited warranty



Note: Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.


V2092-28 roof vent



Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Attach interior garnish piece with #8 screws.


V2092SP-28 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White





Customer Satisfaction Score:


Customer Reviews

Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - V2092SP-28

Average Customer Rating:  4.7 out of 5 stars   (662 Customer Reviews)

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.

by:

Shipping was above average, very quick.
Product
was what I expected, HOWEVER The last one I purchased from another co. Included all the required screws. I was miffed when I opened the box and saw no screws, and the directions which I do not need were for a different application. Overall pleased.



by:

Was missing the retaining clips on both items. The old ones were ok.

Etrailer Expert

Katrina D.

3/20/2024

Let me get you over to customer service anyway. I know the old ones will suffice, but they should still know how it arrived to you.



by:

What I'd like to know is how ETrailer got my Roof Vent stuff to me so quickly. Not only that, but I get a note right after I ordered referencing a prior order (for the same thing...different trailer) and I'm saying to myself, "These folks take customer service to another level." Everything ordered was in the box and delivered intact.



by:

Easy installation and operation.



by:

Fit the old opening just fine. Easy install, I had to install backwards because of the roof slope on my A-Frame trailer.



by:

Great product, perfect product without the handle



by:

This was a great vent for my family's pop up camper that was passed down the family to me. The vent cover in the middle of the camper was broke into peices and was covered up for many years. No damage was down from the rain so I was thankful. This vent is great and It was real simple to install. And works perfectly and is for sure brand new in the box. Note: it did not come with screws, so you will need to get those along with your caulk tape and caulking of your choice. The instructions calls for size #8 screws. I used 1" long self tapping screws which worked perfectly for the job.

Thanks etrailer.com your fast shipping and reasonable prices, which got my camper as good as new now. I will be using you guys from now on, if anymore parts are needed in the future.



by:

Thank you! Just what I needed.



by:

Delivery was timely and arrived complete and intact. The Vent dome kit fit perfectly and I was able to install the assembly in a short time with excellent results. I will definitely return to e trailer for future projects.



by:

Trailer roof vent was of high quality and was self installed with no problems. Very pleased with etrailer.com.



by:

Everything worked out perfectly!



by:

this rating is for the service, have not installed the roof vent, the service and ordering process were outstanding, i had the item in hand 3 days after placing the order. Thanks for the quick turn-around, if i need anything else for my trailer you are definitely the first choice for me



by:

Easy to install ( I highly recommend a good quality elastomeric caulk) the dome is a light weight plastic, had I known I would have spent more money for a heavier fiberglass unit.



by:

Good product, easy to install.



by:

Was very pleased with the service and quick response. It got here sooner than promised and have already gotten it installed. It was used in the conversion of an enclosed utility trailer.



by:

Received the vent faster than expected, installed is and work great! Removed the old vent and installed this unit, fits great and the screen is much better than the old one. Great price, fast delivery, installed easily.



by:

So easy to install. Did it in one half hour.

Meredith

8/15/2023

After ordering the wrong one customer service was awesome and finally installing the correct one, it works great. It was easy to install too.



by:

Appears well made and easy to install. One of the great things is Etrailer sells repair/replacement parts so you don't have to replace the whole unit if something breaks or wears out. Nice unit and great price



by:

Easy installation. Great for daytime light, and ventilation.



by:

These were exactly what we were looking for to replace our existing yellow speakers. Perfect fit in our 2006 Kodiak Hybrid. Quick delivery and reasonable price.



by:

Due to packing of shipment, heavy items were put on top of vent and vent plastic was cracked



by:

Material could be a bit stronger but does the work! Good bang for the buck



by:

Everything was great. Loved doing business with you.



by:

I bought this vent to replace the one in my Pace American cargo trailer. The only alteration needed was to trim 1/2 inch off the inside trim, my roof was thinner. I found butyl tape & sealant at Lowes to complete the job. Vent looks great & I like the knob better than the crank, doesn’t stick down to snag stuff.

Ronald

5/25/2020

1 year later I wouldn’t change a thing, works great, looks great!



by:

I was pleased and surprised when installing the new vent, that it was not only a perfect fit in the opening in the camper roof, but the screw holes in the flange lined up precisely with the holes from the previous unit I had removed! This may be because there is some kind of industry standard on hatch flange layouts, or I just got lucky. But boy, did that make the install simple and fast. I ran out of my Dicor Self-leveling sealant, before getting completely around the unit, but the job is virtually done and the new vent looks great!

Robert

11/14/2020

Sorry, but the camper has been parked for a long time. But no question, the new vent is fine: no leaks, functions well. Thanks!


25
662
Show More Reviews

See what our Experts say about this Ventline RV Vents and Fans

  • Replacement Trailer Roof Vent Recommendation to Replace a Brotherhood Roof Vent
    The Ventline Ventadome Trailer Roof Vent # V2092SP-28 that you referenced is going to be your best option. Most likely when you remove the old vent from your trailer the roof opening is going to be either 14 by 14 inch or 14-1/4 by 14-1/4 inch and this will install easily in it's place Worst case scenario you would have to slightly enlarge the hole to get the vent to fit. I attached an install video for you to check out as well. For an install kit you would want the part # 344270KITW....
    view full answer...
  • Is The Ventline Ventadome Trailer Roof Vent V2092SP-28 White?
    I was able to confirm that the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28 you were looking at is white in color. The # V2094SP-28 has a white lid, but uses a birch white trim which is an off white color. I included videos for both of the products mentioned for you to take a look at.
    view full answer...
  • Recommending a Vent and Screen For Van
    There are products you can use in conjunction which will keep both the rain and bugs away. The Camco RV and Enclosed Trailer Roof Vent Cover with Detachable Louvered Screen, # CAM40431, will keep the moisture out while sitting atop the Ventline Ventadome Trailer Roof Vent, # V2092SP-28, which has a screen to stave off whatever bugs may try to squirm their way in.
    view full answer...
  • Replacement For Discontinued Northern Breeze Vent
    The Northern Breeze trailer vent has been discontinued, and as such there are few replacement parts available now, and that includes the screen. While I know it is not exactly what you wanted to hear, the best option available is to replace your Northern Breeze vent. The good news is that these vents fit standard cut outs of roughly 14" x 14" and are economical of you go with the simple manual-crank vent. For that I recommend checking out the Ventline Ventadome Trailer Roof Vent # V2092SP-28. Or...
    view full answer...
    Image 1 for
  • Replacement Roof Vent Lid for Trailer with Missing Lid
    Since the style of roof vent you have does not have a lid replacement available your best option is a new vent assembly with the part # V2092SP-28. For an install kit you'd then want the part # 344270KITW which comes with sealant and mounting screws.
    view full answer...
  • Replacement Roof Vents and Vent Lids for 2008 Jayco Octane Toy Hauler
    Sorry about Mother Nature giving your trailer a beating. We have both complete standard 14 x 14-inch roof vents as well as just replacement lids in many colors and in the most popular hinge designs. If you care to just replace the lids only (and not have to tear out all three whole vent assemblies) you can refer to the linked photo that shows the four common hinge types for 14 x 14 roof vents. Just match your hinge type and then select that one on the page for replacement lids that I...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Roof Vent Replacement For A 65 VW Camper
    When you say 16.5" x 16.5" outside frame diameter I'm assuming you mean that you measure the flange of the vent and not the actual vent size. If so, then your vent is most likely going to fall into the 14" to 14-1/4" range. The Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28 you were looking at will fit this size opening and will allow air to circulate in your 65' VW Camper. If you would prefer one with a fan then I recommend the MaxxAir Mini Deluxe...
    view full answer...
  • Recommended Replacement Roof Vent For 1981 StarCraft Starmaster 1906 LT
    For a roof vent, the standard size is 14-1/4 by 14-1/4 inches. If you want to replace the entire vent, I recommend the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28. I also recommend the Installation Kit # 344270KITW. For a powered option, I recommend the Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White # V2119-601-00. This will give you a powered lift and fan. If you are only looking to replace the lid, you...
    view full answer...
    Image 1 for
  • Replacement Roof Vent Lid for 2007 Haulmark Trailer
    I do not have any information about which particular vent Haulmark used on their trailers, but you can easily determine which replacement lid you need. The easiest way to do this would be to provide me with any manufacturer and model number information you might be able to find. With this information, I can check with the various manufacturers for a replacement lid. If you cannot find any info on the remaining vent, you will need to measure the existing vent. When measuring for a replacement...
    view full answer...
    Image 1 for
  • Recommended Vent Replacement for Sundowner Horse Trailer Tack Room
    I believe the tack room vent on your Sundowner is smaller than standard size vents and we don't have anything to fit your current vent. I had another customer a while back that measured their Sundowner and it was 13x13 inches so not a standard size. If you wanted to enlarge the hole and go with a different vent all together we have the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28 which is a very popular option and would give you the standard...
    view full answer...
    Image 1 for
  • Recommended Roof Vent Upgrade To Replace Broken 12x12 Vent Lid
    I have a replacement option but you are correct that we do not carry any 12x12 vent lids. The 12x12 vent lid is an odd size that is difficult to find replacement lids for so I recommend changing your vent to the more common 14x14 vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28 that has easy to find replacement parts to make life easier in the future. The Ventline Ventadome # V2092SP-28 has a white lid, but if you prefer a smoke lid you can use # V2092SP-29 Installing...
    view full answer...
  • Will the Ventline Ventadome Trailer Roof Vent # V2092SP-28 Fit a 2006 Keystone Montana
    I have some information that will help you determine if the Ventline Ventadome Trailer Roof Vent, # V2092SP-28, will fit on your 2006 Keystone Montana trailer, but these vents are not tested on specific trailers. To determine if this vent will fit your trailer, you will want to measure the rough opening of your current vent. You can expose the rough opening by removing the ceiling garnish and screen from inside the trailer. This vent fits a square rough opening of 14-1/4 inches x 14-1/4...
    view full answer...
  • Best Priced Replacement RV Roof Vent Lid for 1973 Holiday Rambler
    The most economically priced roof vent option we have for the standard 14 inch by 14 inch roof vent opening you have is the Ventline part # V2092SP-28 which would work great. There isn't a way to drill or rivet just a roof vent lid to a vent assembly like you mentioned.
    view full answer...
  • Replacement Roof Vent Lid for Hallmark Trailer
    For some reason I'm not able to open your picture but if it looks just like the one in the answer you mentioned then you have a standard sized roof vent with a continuous hinge. The hinge is a metal hook sort of shaped like "J" that runs the majority of the length along one side. I've attached the picture from the answer page you mentioned. The correct replacement lid is # BV0554-01 in white or # BV0554-03 in smoke. For a full replacement vent you can use # V2092SP-28. Or if you want...
    view full answer...
    Image 1 for
  • Replacement Trailer Vent for 2011 Palomina Puma Travel Trailer
    We do not have any vent covers or vents in the 13x14 inch measurement. I recommend replacing your current vent with a standard size vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28. This will allow you to have all the replacement part options as they are needed in the future. This is a very popular option that many trailer manufacturers use. You will need to expand your rough opening slightly and then use the Installation Kit # 344270KITW. Unfortunately the photos did...
    view full answer...
  • What Size Roof Hole Does Ventline Vanair Roof Vent VP-543SP Fit
    The Ventline Vanair Trailer Roof Vent w/ 12V Fan # VP-543SP that you referenced requires a 6-1/4 inch diameter hole to install. Since you have a larger diameter hole currently what you could do is get maybe a piece of sheet metal that is larger than your opening and cut the smaller 6-1/4 inch hole in it for this to attach to. Or if you don't mind opening the hole even larger you could cut a 14-1/4 inch by 14-1/4 inch hole and install a roof vent like the part # V2092SP-28 which is a standard...
    view full answer...
  • Depth of RV Roof Mount Vent for installing through the roof
    I went out to the warehouse and the thickness of the rough opening in the roof for installing this vent can be from 1-7/8 inches to 3 inches.
    view full answer...
  • Pin Functions and Locations for Vehicle and Trailer Side 7-Way Connectors
    I have included a picture that shows how both a vehicle side and trailer side 7-Way are pinned. Ignore the colors and just look at the functions since, like you said, there isn't a standard color code. I have also included a link to the help article that contains the pictures.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Garnish for a Ventline Trailer Roof Vent
    It sounds like you are talking about the ceiling garnish. I have included a link to the ones that we carry to the right. But they are all 14-1/4 inches square. This is the measurement of the part that fits in the opening though, not the overall width so one of these garnishes is likely to fit if you have a Ventline roof vent.
    view full answer...
  • How to Determine Which Replacement Vent Lid for 2005 Lowe's 6x10 Utility Cargo Trailer
    It sounds like you're just needing a replacement vent lid. If just the existing lid is damaged, you can just replace the lid instead of the entire assembly. In order to determine the correct replacement vent, you'll first need to examine what's left of the old vent cover and the vent itself. Look for any brand name or part numbers. Most roof vents are made to fit an opening that is approximately 14-1/4 x 14-1/4. This size is often referred to as 14 x 14. The old vent in your trailer is...
    view full answer...
  • Availability of Replacement Parts for Ventline Rounded Dome Trailer Roof Vent
    The Ventline product you reviewed, part # V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank assembly, a removable screen, and a white plastic 2-1/8-inch-deep garnish (interior trim ring). Please note that this part requires an installation kit, part # 344270KITW, which consists of mounting hardware and a urethane caulk sealer. If your...
    view full answer...
    Image 1 for
  • Replacement Ventline Roof Vent for 2005 Freightliner MB Sprinter with Ventline Vent
    To pick out the correct garnish length you need to measure the thickness of the roof on your trailer. The part # VA0445-28 is a 4-1/8 inch tall garnish. It looks like you have a part # V2092SP-28 installed and it would be easiest to just use this as a replacement for what you have since the cost is pretty decent. The included garnish with this kit measures 3 inches and could be trimmed shorter if needed.
    view full answer...
    Image 1 for
  • Will Trailer Roof Vent, Part # 60758 Fit Roof That is 2-1/2 Inches Thick
    The interior trim piece on the Ventline Trailer Roof Vent, part # V2092SP-28, fits roofs 1-7/8 inches to 3 inches thick. This unit should work just fine for you. I have included a link to a video review of the vent for you.
    view full answer...
  • Will This Camco Roof Vent Fit 14" x 14" Opening?
    The Camco # CAM40480 that you referred to will fit your 14"X14" roof opening as long as you roof thickness is between 1-1/4" to 2-1/4" thick. If you roof is thicker you may be able to use the Ventline # V2092SP-28 which will work with roofs 1-7/8" to 3" thick. However the Ventline uses a 14-1/4"X14-1/4" roof opening, so you may need to trim the opening a little.
    view full answer...


< Previous
123. . .9



Do you have a question about this RV Vents and Fan?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Raymond P
Written by:
Raymond P
Employee Kathleen M
Updated by:
Kathleen M
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Adam Y
Updated by:
Adam Y
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Robert C
Installed by:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.