Recommended Vent Replacement for Sundowner Horse Trailer Tack Room
Question:
I purchased one from your site - and apparently its not the right one. I measured it it and it seems just under 14x14. With the attached photo can you help me the correct part? I also took a picture of the one I ordered which said it was 14x14 but definitely does not fit.
asked by: DeeAnn L
Expert Reply:
I believe the tack room vent on your Sundowner is smaller than standard size vents and we don't have anything to fit your current vent. I had another customer a while back that measured their Sundowner and it was 13x13 inches so not a standard size.
If you wanted to enlarge the hole and go with a different vent all together we have the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28 which is a very popular option and would give you the standard size that has replacement parts readily available as needed. This is the standard size that is often referred to as 14 by 14. I recommend the Installation Kit # 344270KITW to give you everything you need for an easy install.
Products Referenced in This Question
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- LaSalle Bristol
more information >
Product Page this Question was Asked From
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White
- RV Vents and Fans
- Vent
- Roof Vent
- Manual Lift
- 4-1/2 Inch
- No Fan
- 14W x 14L Inch
- Plastic and Metal
- White
- Ventline
more information >
Continue Researching
- Shop: Replacement Race for 14125A Bearing
- Search Results: 14125a
- Shop: Weld-On 2" Diameter Pipe Mount Tube for Pipe Mounted Trailer Jacks
- Shop: Replacement Race for 25580 Bearing
- Shop: Pro Series Square Jack with Footplate - Drop Leg - Sidewind - 28-11/16" Lift - 5,000 lbs
- Search Results: 25580
- Search Results: 387a
- Shop: Replacement Cap for etrailer and Ram Square, Direct Weld, Sidewind Jack - 10K
- Shop: Replacement Trailer Hub Bearing - 25580
- Search Results: 10~51
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Search Results: stl009rb
- Article: Trailer Wiring Diagrams
- Search Results: 15123
- Search Results: 67048
- Shop: Gooseneck Hitch
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Hitch Extension for Towing a Boat on a Truck with an In-Bed Truck Camper
- Q&A: Can I Use Both the 7-Way and 4-Way Connectors at the Same Time on a 2015 Chevrolet Silverado
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Reese Extension/Reducer # RP45292 Compatibility with Class V Factory Hitch on 2013 Ram 2500
- Q&A: Taillight Replacement for Trailer with SAE Number 1ST P2-84-DOT
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: What To Look For When Buying Ratchet Straps
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Replace an RV Roof Vent Cover
- Article: How Harvest Hosts Is Becoming the New Standard of the Camping Industry