Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"
(110 reviews)
Price: $300.96
In Stock
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"
Item # 41990-16
Retail:$465.49
Our Price: $300.96
You Save: $164.53
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (110)
- Q & A (0)
- Photos
Draw-Tite Heavy Duty Receiver Hitch - 41990-16
- 16000 lbs GTW
- 2 Inch Hitch
- Class V
- Draw-Tite
- 16 Inch Drop
- Weld-On
- 44 Inch Wide
- 1600 lbs TW
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 16" Tall, weld-on mounting brackets included.
Features:
- Universal-fit trailer hitch lets you tow a trailer with your heavy-duty or commercial vehicle
- Designed for full-size trucks with long wheel bases and heavy-duty suspensions
- Computer-aided steel construction ensures strength and durability
- Oversize safety-chain loops are easy to access
- Tested Tough - safety and reliability criteria exceed industry standards
- Weld-on installation with included side brackets
- Can also be bolted-on
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Cross tube dimensions: 44" wide x 3" deep x 3" tall
- Bracket height: 16"
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- Not for use with weight distribution systems
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
41990-16 Draw-Tite Ultra Frame Service Body Receiver with 16" Bracket - Universal - Class V - 2"
Installation Details
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" - 41990-16
Average Customer Rating: 4.8 out of 5 stars (109 Customer Reviews)
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 16" Tall, weld-on mounting brackets included.by: Eric07/29/2023
Very solid and heavy duty. All of the parts were nicely painted. The only bummer was the way it was packaged. The large heavy parts were loosely placed in a poor quality box with a half ass tape job. The heavy box tune stuck out of the box. I am very happy with this product.
by: Kerry 02/24/2024
Quinn was very helpful in finding the right hitch for my box truck
Also he researched everything and responded within 24 hours
Good job
by: Jerry G04/11/2017
Great product. Welded it on an M923 military truck to be able to haul conventional trailers and with a receiver pintle hitch I can haul any military trailer, big or small.
Thanks.
by: Jeff b.07/03/2016
This hitch is exactly what is needed for hauling something that requires a receiver hitch behind a class 8 tractor. I tow my Tracker behind the tractor to take it to service unhook, go home, and return to pick up finished repair. No more double trips.
by: James01/15/2023
Item is as shown. Shipping was almost a tragedy. The box was on my front porch this morning with one end torn open as though with a forklift and the Tubular portion of the hitch sliding out the hole, The interior box with the brackets was absolutely mangled as well and the cushion boxes also falling out the exterior box. I worked on getting everything to fit the frame of the Thomas bus I'm attaching it too and it looks like its a winner. Several points on the brackets had the powder coat knocked off while in transit, but that was easily fixed with some good old Rustoleum.
by: Mark09/26/2021
The website is cute enough that you can select you vehicle and year but the cuteness ends there. I assure you will be sent a hitch that won’t fit. Never used and I’ll sell it for half price but honestly I have no idea what it will fit because it sure won’t fit a 2016 Winnebago forza as described. Wish you better luck in your purchase.
by: Paul07/18/2022
Ordered a specific model for 2015 sprinter
Service was great, pre drilled holes don't line up. No installation instructions, very disappointed.
Sierra K.
7/20/2022
This hitch is a weld on. Let me know your wheel base and if you have a standard bumper on your 2015 Sprinter and I will get you the right hitch.
Paul
7/20/2022
Thank you... We bought another hitch from curt...
by: Cody 12/19/2019
A+ product, works as intended. Super thick mounting brackets.
Cody B.
12/20/2020
Works as intended for custom installation
by: Tony03/09/2018
very heavy duty looking , have no worries that it won't work for a long time. Wished the truck it's going on came as fast.
Tony
3/9/2019
install was easy ,strongest hitch ever bought very happy!
by: Hilltop Garage, Wilmington DE03/03/2022
This hitch is Heavy Duty!! If you're looking for a Class 5 hitch to mount on the back of a Big Rig or RV, this is it. Bolt holes help with positioning and mounting. Drop brackets are not welded in place allowing custom fit for your application. Receiver tube must be welded to drop brackets. Highly recommend this product.
by: Rob Berry01/06/2017
The hitch receiver is very stout, the welds look good, the finish is rugged. Very solid.
Rob B.
1/6/2018
Im still pleased with this hitch. The finIsh had held up well.
by: Jay W02/14/2017
The hitch was a replacement for my Motorhome but had to return because it wouldn't fit the frame due to little room. The hitch arrived quickly which gives me the opportunity to determine my next step. The hitch is exactly as described and well made. The folks at etrailer were great and very helpful making the return easy. Thanks again.
by: Heath12/03/2014
Excellent product. Strong and worked great for my application.
by: Jerry E.11/08/2014
Incredibly fast shipping. Very pleased with the product. It appears to be well built and solid. Very happy customer. I would recommend this hitch in a heartbeat!
by: Todd04/15/2013
Great quality, very heavy duty, multiple mounting options depending on your application. this receiver was a great value
by: Ben06/03/2019
Hitch showed up on time. It’s very heavy duty. etrailer rep helped out with some questions. etrailer honored a price match guarantee. Everything went great.
by: Brian05/04/2022
Really great! The piece came just in time for us to get it installed and head out on tour in our bus! Would not have been possible without Edith's help- absolutely wonderful experience and I would order again in an instant. Great equipment at a reasonable price with awesome service- THANK YOU!!
by: Patrick 07/29/2022
It is a large step above the norm…
by: David 11/10/2022
The Hitch fits the needs I needed it fo r.
by: scott s01/24/2015
Great everything that is needed to make it fit my work truck and make it stronger in the towing area where it was lacking
by: Eugen11/16/2023
by: Ransy05/13/2015
Super fast shipping, great products and support.
by: Ray J04/21/2015
Product as described with prompt delive ry
by: Anna 09/14/2022
25
110
Show More Reviews
See what our Experts say about this Draw-Tite Heavy Duty Receiver Hitch
- Availability of High Capacity Weld-On Hitch for Class C Motorhome on Ford E450 Cutaway Van ChassisWe might have a solution for you, but you'll need to do some measuring at the rear of your motorhome to see if it will work. The Draw-Tite # 41990-16 is a Class V hitch, which has a GTW capacity up to 16,000 lbs and a tongue weight capacity of up to 1600 lbs, when correctly installed exactly according to the instructions. In order to determine if this hitch would work for you, the outside to outside dimension between your frame members needs to be less than 44 inches. You'll also need...
view full answer... - Recommended Trailer Hitch Receiver For 1991 International 4700 W/ Low Profile ChassisI do have an option for you, but there is not a custom fit trailer hitch receiver option for your 1991 International 4700 with a low profile chassis. Based on the picture you provided your truck appears to be pretty low to the ground and the 16" tall brackets the Draw-Tite Universal Hitch # 41990-16 has would more than likely put the hitch too low. Instead the Draw-Tite # 41990-07 would be a better option as it only has 7" tall mounting brackets. The brackets can be trimmed to get the...
view full answer...
- Recommended Class V Trailer Hitch Receiver With 16000lb Towing Capacity For 1998 Tioga MotorhomeThe only option to put a trailer hitch receiver on your 1998 Tioga Class C Motorhome is going to be the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 that has a 7" weld on mounting bracket or the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 that has a 16" weld on mounting bracket as there is not a custom fit option that has the 15000lb capacity you are looking for. Both of these universal fit Class V heavy duty trailer hitch receivers will...
view full answer... - Availability Of Trailer Hitch Receiver For 1988 Jeep Grand WagoneerI have an option for you, but there is not a custom fit trailer hitch receiver confirmed to fit your 1988 Jeep Grand Wagoneer. The only option is to install a universal trailer hitch receiver like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 that has 16" brackets that a local fabrication shop can custom fit to your vehicle. I included a video of the # 41990-16 for you to take a look at.
view full answer... - Trailer Hitch for a 2004 Coachman RV to Tow a 5,000 Pound TrailerFor your RV and the 5,000 pound trailer I recommend using an RV hitch that is rated for weight distribution such as # C13701 or # C13702 and to use a weight distribution system. This is because the hitches max out at 5,000 pounds with the exception of these 2 (when used with weight distribution). But to use either of these you would have to get the tongue weight down to 600 pounds or less, even when using weight distribution, to be able to tow the trailer. If you cannot get the tongue...
view full answer... - Recommended Trailer Hitch And Wiring For A 2005 MCI D4000 Bus Since there isn't a custom fit hitch you'll need to use an adjustable width hitch like # 41990-16 and weld it to the frame. Your next step would be the wiring, for this you'll need to splice into the tail lights of your 2005 MCI D4000 bus with the 4-Pole Hardwire Kit with Circuit Tester # 18252. From there you can install the Universal Installation Kit for Trailer Brake Controller # ETBC7 to give yourself a 7-way for your tow bar wiring from your towed vehicle to connect into.
view full answer... - Availability Of Trailer Hitch Receiver For 1990 Ford Conquest 24 Class C CamperI have an option for you, but there is not a custom fit trailer hitch receiver confirmed to fit your 1990 Ford Conquest 24' Class C Camper. The Draw-Tite # 75703 is designed to fit the passenger van versions of your 1990 Ford Van, but the frame is different for the Cab and Chassis models used for the campers. Instead you may be able to install a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07 with 7" tall mounting brackets...
view full answer... - How To Install Trailer Hitch Receiver On 1982 Toyota PickupI may have an option for you, but there is not a custom fit trailer hitch receiver confirmed to fit your 1982 Toyota Pickup. To install one I recommend using a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 with 7" tall mounting brackets or # 41990-16 with 16" tall mounting brackets. Each of these options work with frames that are up to 44" wide, but will need some fabrication to fit your frame, and will need to be welded to the frame by a...
view full answer... - Recommended Trailer Hitch for 2001 Ford F350 Shuttle BusI do have some options for you but there are only universal fit hitches for this application which require either welding or drilling and bolting on. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 is what I recommend using as it gives you the option of either weld-on or bolt-on and the long brackets allow you to customize them to your exact setup and needs.
view full answer... - Trailer Hitch Solution for Fitting Box Truck/Service Body TruckFor box trucks and service body trucks the best option for a hitch is the Draw Tite part # 41990-16 which was designed to have a flexible enough install that it can be installed on your style of vehicle.
view full answer... - What Universal Hitch do You Recommend for My 2002 International 3800/IC School Bus?From the specs I have available for your 2002 International 3800/ic bus, there are a few different manufacturers for that particular model. With that being said, I could not determine the frame width of your particular model you have. In order to know for sure if the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - 2" # 41990-16 will work on your bus, it needs to have a frame that does not exceed 44 inches wide. I recommend measuring your bus's frame in order to determine...
view full answer... - What Heavy-Duty Trailer Hitch Receiver Will Fit 1993 Fleetwood RV With Chevy P30 ChassisThe Reese Trailer Hitch, # 41940, is designed for Chevy, Ford and Dodge 34 inch frames. To make sure it will fit your Chevy P30 chassis, you want to make sure that you measured from inside of the C-channel frame rail to the inside of the C-channel frame rail on the other side and see if it measures 34 inches. Also this heavy duty hitch has a gross towing weight of 15,000 lbs. and a tongue weight of 1,500 lbs., but you do have to remember that the weight you can tow is limited to what...
view full answer... - Recommended Trailer Hitch for a Isuzu Box TruckYes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 is exactly what you are looking for as it has very tall side brackets which will be more than enough to get the receiver tube down under the rear bumper, adjustable width up to 44", and a class v 16,000 lb weight capacity. The side brackets can be further modified to sit directly under the bumper if you desire for a better overall look. Please note, there are no custom fit options for your vehicle which...
view full answer... - Hitch Solution for Transit BusWhile we don't have anything that would bolt right up without some modification we do have service body hitch solutions like the Draw Tite part # 41990-16 which comes with 16 inch drop brackets and it will require welding.
view full answer... - Trailer Hitch For A 2007 Freightliner Champion Transit Bus Though we do not have a custom towing hitch for your 2007 Freightliner Champion Transit Bus but we do have Draw-Tite Weld On Hitch # 41990-07. This hitch is weld on and will fit frames up to 44 inches. If you need a hitch with more of a drop I recommend The Draw-Tite Hitch # 41990-16 which has 16 inch brackets this hitch requires welding as well. I recommend the work be done by a certified experienced welder. I attached a review video link below.
view full answer... - Trailer Hitch for 1999 Ford F-350 Chassis With Custom Truck BodyWe do have trailer hitch options for your 1999 Ford F-350 chassis with a custom truck body; from my research it looks like the Royal custom truck body you referenced is a service truck body. If your 1999 F-350 has a frame that is up to 44 inches you can use the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07, which has 7 inch tall weld-on brackets or # 41990-16, which has 16 inch tall weld-on brackets. The correct height will depend on how much space you need to clear...
view full answer... - Is There A Class III Trailer Hitch For My 2009 Volkswagen EurovanI did some online research and the 2009 VW Eurovan was not sold in the US or Canada. Due to this, none of our trailer hitch vendors have a fit for this vehicle. There is an outside chance the CURT Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 13217, fits your vehicle. I am not sure if there is any difference between the frames of the last US version of this vehicle, 2003, and the frame of your 2009 model. You will assume the risk if you try to see if they are compatible....
view full answer... - Availability of Trailer Hitch for 1997 Chevy Express Cutaway With Mini Bus BodyFor a vehicle like your 1997 Chevy Express Cutaway Bus you will need a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This is a Class V hitch with a 2" receiver and 7" tall mounting brackets. If you think you will need more of a drop the # 41990-16 is also available with 16" brackets. We recommend taking it to a certified welder for installation.
view full answer... - Solution for Trailer Hitch Receiver on 2006 Bluebird All American FE School BusSince there are no custom fit hitches for your 2006 Bluebird All American FE School Bus you will need to use a universal hitch. I recommend one of the following: -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 (7" brackets) -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 (16" brackets) The only difference between the 2 is the size of the mounting brackets. Both have a 2" receiver and the same 16,000 lb max trailer capacity fitting frames up...
view full answer... - Trailer Hitch for a 2002 Ford F-350 with Knapheide Utility BodyUsually they put utility bodies like the one on your 2002 Ford F-350 on the cab and chassis versions of the truck (rather than the standard models that would come with a regular bed). You would need to look at the hitches for the cab and chassis models linked to the right. These hitches fit a frame width of 34 inches. This is measured from the outside of one frame rail to the outside of the other frame rail. If your measurement is 34 inches then you would look at the cab and chassis hitches...
view full answer...
- Could Draw-Tite Trailer Hitch 41990-07 Be Used As Front Mount Trailer Hitch On 1989 GMC P30 Van?There is nothing wrong with using the Draw-Tite Trailer Hitch Receiver # 41990-07 with 7" tall mounting brackets or # 41990-16 with 16" tall mounting brackets as a front mount trailer hitch receiver for your 1989 GMC P30 Step Van. You are correct that may need to do some modifications to get the hitch to fit, but as long as your frame is not wider than 44" this should not be a problem. I do recommend having a qualified welder weld the hitch to make sure it is structurally sound, and use...
view full answer...
- Can Draw Tite Service Body Hitch 41990 Fit Ambulance Build on 2007 Chevy ExpressFor what you are trying to do a fabrictor is going to be your only option for safe install. What I would recommend is take the cross tube part # 41990 to a qualified fabricator in your area and tell him what you are looking to do and he will come up with a way to install the hitch at the exact height you are looking for.
view full answer... - Recommended Trailer Hitch For A 1996 G30 Camper Van There unfortunately isn't a custom-fit trailer hitch confirmed to fit your 1996 G30 Camper Van since it's been modified from the original Van base. You would instead need to install an adjustable-fit trailer hitch like the Draw-Tite # 41990-07 (7" drop) or # 41990-16 (16" drop). These hitches can fit a frame width of up to 44" and would need to be welded onto the frame.
view full answer... - Trailer Hitch Receiver For 2005 Ford E-450 CutawayWhile we do have an option for a hitch for your 2005 Ford E-450 cutaway, there isn't a custom fit. So the best option is a universal service body hitch, which can either be welded or bolted on. The right one is going to depend on the height of mounting brackets that would be best for your van: - 7" Tall Mounting Brackets: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 - 16" Tall Mounting Brackets: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
10/7/2021
This receiver is a universal-fit trailer hitch that fits heavy-duty and commercial vehicles with frames up to 44 inches. Before purchasing this product I would measure the frame of your vehicle and also measure where the 16 inch tall, weld-on mounting brackets will be going to ensure that you have the room.