bing tracking image
  1. Accessories and Parts
  2. Optronics
  3. Trailer Lights
  4. Wiring
  5. Plugs and Pigtails
  6. Two Wire
Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug

Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug

Item # A49PB
Our Price: $4.92
Accessories and Parts
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights. 1-800-940-8924 to order Optronics accessories and parts part number A49PB or order online at etrailer.com. Free expert support on all Optronics products. Great prices and Fastest Shipping for Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (100)
  • Q & A (0)
  • Photos

Optronics Accessories and Parts - A49PB

  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Optronics
  • Two Wire
  • 10 Inch Long
  • Right Angle Pigtail

This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights.


Features:

  • Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics backup and utility lights
  • Right-angle design of plug allows wiring to run down from the light rather than straight out of the back
  • Male-pin, 2-prong PL-3 molded plastic plug connects to back of trailer light
  • 2-Wire pigtail
    • White wire for ground
    • Red wire for power
  • #10 Ring terminal on ground wire
  • Approximate wire length: 10"


Optronics A49PB Right Angle 2-Wire Pigtail Dimensions

Pigtail is a direct replacement for:

  • Uni Bond PT6020
  • Truck Lite 94992
  • Grote 67010
  • Peterson 421-49


A49PB Optronics Right Angle 2-Wire Pigtail for Trailer Back Up and Utility Lights - 2-Pin PL-3 Plug

Alternate part number: A-49PB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug - A49PB

Average Customer Rating:  4.9 out of 5 stars   (100 Customer Reviews)

This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights.

by:

Ordered Monday, delivered on Wednesday. Did install today. Lights look in the garage, lake test Monday before sunrise.
Same brand as tail/stop lights on my trailer. Same quality look.

Dean L.

4/15/2024

Very pleased with the output on unimproved ramps. Plenty of light to back down safely in pre dawn conditions. Absolutely recommand as an upgrade in your trailer.



by:

After a year of using these in the saltwater as backup lights for my boat trailer they are still going strong



by:

They have everything you could possibly for your trailer and towing needs



by:

Right product for the job



by:

Excellent fit, high quality, and already dielectric greased!



by:

I recently purchased all new LED lights for a 28 year old Ranger Boat trailer I own. I had to add a 5th blue wire for the back up lights along with a new 5 wire plug. Everything came from etrailer and was an amazing, easy conversion from the old to the new. My new tail lights are amazing with the built in back up lights! Nothing but compliments from people who have seen them.
Your company was a pleasure to work with. You have a customer for life! Thank You!



by: 08/10/2022

packaging of taillights where loose causing them to get scuffed and scratched during shipping, quality and visibility of lights are excellent and pigtails really good, if lights would be individually packaged and taken better care of i would give 5 stars



by:

Great, Good quality, plenty of wire to work with.



by:

I was able to replace my existing lights with these that include the back-up light feature. Exact fit and work better than expected. Now I can see behind my 5th wheel when backing up the rig. The light harness along with the light fixture more than met all my expectations.



by:

Recently it was time to replace/ upgrade my boat trailer rear lights. I found exactly what I was looking for at etrailer. The parts I ordered were well described and fit exactly right for my application. I also ordered the wire pigtail connectors as I was adding lights with an integrated backup lamp. Installation was a breeze and all the parts seem to be high quality. I will definitely buy more items of etrailer in the future. Thanks for the parts.



by:

I am greatly impressed with the quality and durability of this connector. It's sturdiness has already been tested and it passed beyond its oem predecessor!!

Jon C.

7/20/2017

Its still attached to the trailer thus making it great product. The oem part failed which is why I needed a new one.



by:

Product worked exactly as described... made for an easy conversion of my original LED tail lights to upgraded models that feature integrated backup lights.



by:

Worked great! Need it to install GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes - Oval - Clear Lens - BUL111CB



by:

These were a great option for the limited space available on my trailer. I find myself pulling my trailer at night frequently, and I'm not sure how I made it so long without reverse lights.



by:

while shipping was on the slow side the item Ipurchased was exactly the right fit and was of excellent quality at a great price.I highly recommend etrailer if shipping time is not an issue,their prices are good and the parts are of good quality.



by:

Had to buy these when adding reverse lights to back of utility trailer. They work well in the led lights.
Easy to install and of good quality. No complaints.



by:

I made this purchase for my son's boat trailer. I ordered on the Monday before Thanksgiving and it arrived the day before. Everything arrived as expected and well packed.



by:

Good plug. Have bought several. etrailer.com ships same day and they are great people to do business with.



by:

Excellent service and attention to detail. I would highly recommend purchasing from etrailer. Prices are great and they have a wide selection of information that helps with the purchase decision. Very impressed.



by:

I suggest using part of a pool noodle to ensure the connection stays tight, in the enclosier.
I used this in pole lights on a boat and they did rattle free , before I used the noodle mod.



by:

Simple part. Fit the optronics lights that we have well.



by:

Standard 2 wire light plug, works well



by:

Great product would buy again also highly recommend buying from e trailer fast shipping got what I ordered in 2 days



by:

well made unit, did not utilize, but would buy again



by:

Right angle plug was a perfect fit. Arrived when it was scheduled. Great follow up customer service. I'll do business again with etrailer!


25
100
Show More Reviews

See what our Experts say about this Optronics Accessories and Parts

  • Compatibility of Optronics Backup Lights, Grommet and Mounting Bracket
    I can confirm for you that each of the parts you referenced will fit and work together. The GloLight LED Backup Light # BUL111CB, PVC Grommet # A70GB, and Trailer Light Mounting Bracket # BK70BB are all compatible with one another. The only other part you would need is the 2-Wire Pigtail for Optronics Trailer Lights # A49PB. I've added links to video reviews of each of these parts for you to take a look at as well.
    view full answer...
  • Recommended Bright Back Up Light For A Utility Trailer
    The Optronics LED Trailer Utility Light - Submersible - 3 Diodes # UCL55CB will be 15 lumens, so it can work as a back-up light, but it will not be very bright. However, the Optronics Miro-Flex LED Utility Light - Submersible - 9 Diodes # UCL50CB will measure almost exactly the same (2" diameter x 1-3/16"), but as it has 9 diodes it will be 44 lumens. This is the light I would go with. If you do not already have them, the Right Angle 2-Wire Pigtail # A49PB and 2" Round Grommet # A54GB...
    view full answer...
    Image 1 for
  • Rewiring Boat Trailer for 7-Way to Use LED Lights
    There are a number of things you will need if you want to re-wire your boat trailer to use LED lights and you should start with Junction Box # 3375601100 and 7-Way # HM20041. Keep in mind you will also need Ring Terminals # 44-5310A and Loom Clamps # A0500 For LED lights I highly recommend checking out the LED Trailer Tail Light # STL57RB (Driver's side) and # STL56RB (Passenger's side). These are submersible lights with a total of 40 diodes and have mounting holes that are 2" center to...
    view full answer...
    Image 1 for
  • Looking for LED Version of # AL91RB Mini Rectangular Clearance/Side Marker Lamp
    You bet we do! For the LED version, you'll need part # AL91RB. The lamp can be grommet mounted using # A91GB or surface mounted using a self grounding base like # A91BB for black/ # A91CB for chrome or a standard base like part # A91BOB for black/ # A91OB for chrome. If you use a self grounding base, use the single wire pigtail, part # A91LW or for the standard base, use the two wire pigtail, part # A49PB.
    view full answer...
  • Looking for Way to Mount Optronics Backup Light # BUL10CB on Ranger Trail Boat Trailer
    In order to mount the Optronics Backup Light, # BUL10CB, on your Ranger Trail Boat Trailer, I recommend using the Rubber Grommet, # a70gb, and Trailer Light Mounting Bracket, # BK70BB. A wiring harness, part # A49PB for a right angle plug and part # A45CB for a straight plug, will also be needed for the Optronics Backup Light, # BUL10CB. I have included a few short videos for you to check out.
    view full answer...
  • Plugs Needed for the Fusion LED Trailer Tail Light # STL211RCB
    At first I thought that this light had 2 places for the 3 terminal plugs but if you check out the attached picture of the Fusion LED Trailer Tail Light # STL211RCB you can see that one plug has 3 prongs (for tail light functions) and one plug has 2 prongs (for reverse light function). If you are just needing standard plugs then you would use part # A45CB for the 2 prongs and part # A45PB for the 3 prongs. These are also available at right angles with parts # A49PB and # A47PB respectively.
    view full answer...
    Image 1 for
  • Submersible LED Trailer Light Recommendation to Provide Standard Functions and Back-up Lights
    In order to have the tail light functions that you requested, you would have to go with two separate lights. I recommend taking a look at the Wesbar Wrap Around Tail Lights. For the 8-function left hand side, part # 271595, and part # 271594 for the right hand side of your trailer. These lights will serve as a stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license plate illuminator on the driver's side light. Next you would need to add a back-up light like...
    view full answer...
  • Recommended 2" Diameter Submersible White LED Light
    The best option for a 2" diameter, submersible, WHITE LED light is going to be the Miro-Flex LED Utility Light item # OPT57FR. These won't be stamped DOT approved because they are not reverse lights. We don't have any options that are. You will want to check with your local highway patrol office to see if you can run white lights on the side of your trailer. To help with your installation you can use the 2-Wire Pigtail item # A45CB or the Right Angle 2-Wire Pigtail item # A49PB.
    view full answer...
  • Availability of 6 Inch Long Oval Red and White Light Assemblies
    The closest options we have available to what you are looking for are the Red GloLight LED Trailer Light # STL111RB and the White GloLight LED # BUL111CB. Both light assemblies can be paired with the PVC Grommet # A70GB and feature a sonically sealed, waterproof housing and lens that is submersible. The red light assembly can be used with the 3-Wire Pigtail # A47PB and the white assembly will work perfectly with the 2-Wire Pigtail # A49PB. The light assemblies measure 6-1/2 inches long,...
    view full answer...
  • Recommended 4 Inch Diameter Clear LED Back-Up Lamp w/ Pigtail and Grommet
    For a standard 12-volt electrical system, I'd recommend the Optronics # BUL11CB. The # A49PB right-angle plug is compatible with the lamp, and you'd need the # A45GB grommet. For a 24-volt electrical system, use the # BUL23C24B lamp, which is compatible with the same plug and grommet mentioned above.
    view full answer...
  • Wiring New Trailer Connector with Reverse Light Signal to 2015 Trailstar Tandem Axle Trailer
    The easiest way to add a reverse light circuit to your TrailStar trailer is to tap into the reverse light circuit on your 5-pole, IF that is the assigned function. Often boat trailers with surge couplers have an electric reverse lockout feature that allows you to back up the trailer without having to first get out of the truck to manually engage a lockout (which prevents the brakes from actuating as you back up against the coupler). If your trailer coupler has an electric lockout feature...
    view full answer...
  • Reverse or Utility Lights to See When Backing Up Cargo Trailer
    If your trailer has a 7-Way connector and the vehicle side has the center pin active when the vehicle is in reverse then you can install backup lights on the trailer and wire them to the center pin. You can use 2 of backup light # BUL12CB 2 of grommet # a70gb 2 of bracket # BK70BB And 2 of pigtail # A49PB If you do not have a 7-Way but just a 4-Way instead you could wire a utility light such as # TLL48FB in with the running light wire on the trailer and have the utility light run on a...
    view full answer...
  • Recommendation of Turn Signal and Parking Light for Off-road use
    I recommend the amber trailer turn signal and parking light # ST70AB as it's sealed and waterproof. The rubber grommet # a70gb will provide shock mount protection extending the life of the lamp. The Optronics # MCL157AB could possibly be used as a turn signal but not recommended. The grommet you referred # A56GB would work as it will provide shock protection especially that you will be off-road. It will seat properly once the light is plugged into the grommet. The LED equivalent is amber...
    view full answer...
  • Suitability of Optronics LED Trailer Back-Up Lamp # BUL11CBX for a Boat Trailer
    They certainly can. The Optronics # BUL11CBX is completely sealed and waterproof. They'd be perfect for a boat trailer. You'd also need either a right angle pigtail, part # A49PB or a straight pigtail, part # A45CB. Also keep in mind that although the lamps are waterproof, your trailer wiring might have junction points that aren't. This is why I recommend you unplug the boat trailer before backing into the water.
    view full answer...
  • LED Reverse Light for Trailer with Limited Space
    One option for a DOT approved LED reverse light is Sealed, 6" Oval, LED Trailer Utility Light, Adhesive Mount, 10 Super Diode - Clear Item # BUL78C3MB. It is 7-9/16" x 3-5/16" x 3/4". You mentioned there isn't a lot of space available. How much space do you have? There are not a lot of DOT approved reverse lights available so another option is to use light # BUL10CB with grommet # A70GB and bracket # BK70BB and pigtail # A49PB. Then you can mount the light in the bracket off of the frame.
    view full answer...
  • Brightness and Installation of the Optronics LED Backup Light # BUL22CB on a Boat Trailer
    I have attached a video demonstrating the brightness of the Optronics LED Backup Light, # BUL22CB, for you to check out. This light is waterproof and will work well on your boat trailer as a reverse light. Along with this light, you will want the Two Wire Pigtail, # A49PB. The end of this plug is molded rubber that, along with dialectic grease, will help seal the plug from water and moisture. To attach this light to your trailer, you will need the grommet, # A70gb. If you will not be...
    view full answer...
  • Recommended 4 5/16" Clear Lens Light For Utility Box
    I may have an option but we do not have a matching white/clear lens light like the 4 5/16" Miro-Flex LED Trailer Tail Light # STL23RB you mentioned. The closest option we have is the ONE LED Backup Light # BUL003CB which is 4 5/16" and offers a water proof design with a clear lens and a single white LED diode. You will also need the 2-wire Connector # A49PB and Mounting Grommet # A45GB. I included a video of the ONE LED # BUL003CB for you to take a look at.
    view full answer...
  • Outside Diameter of 2 Inch Round Grommet
    The outside diameter of the 2" Round Grommet # A54GB you referenced is 2-3/4". This grommet is used with 2" round lights such as the GloLight LED # MCL155RB (Red) or GloLight LED # MCL155AB (Amber). You will also need a 2-wire pigtail to complete the installation of these lights; either # A46PB for a 6" lead or # A49PB for a 10" lead. I have added links to video reviews of these parts for you to check out.
    view full answer...
    Image 1 for
  • Adding Extra LED Reverse Lights to a 2015 Subaru Forester
    I recommend using LED back up light # BUL10CB which is actually DOT approved as a backup light. With it I recommend grommet # a70gb, mounting bracket # BK70BB, and wiring harness # A49PB. On the wiring harness the white wire is the ground and will attach to a clean, bare metal surface. The red wire is for power and would need to be spliced into a reverse light wire behind a tail light on your 2015 Subaru Forester. You will need to attach the new light red wire to a longer strand of wire...
    view full answer...
  • Brightest LED Backup Lights Available That Fit Oval Hole On Trailer
    The GloLight LED Backup Light for Truck or Trailer # BUL111CB that you mentioned is going to be your best option if you are looking for the brightest backup lights in the oval recessed mount style. This product does not offer specs for lumens; I did contact Optronics to verify. They did, however, confirm with me that this LED backup light is going to be the brightest one available. It has 22 diodes, which is more than any other light in this configuration/style. This is DOT compliant. The...
    view full answer...
  • Replacement LED Marker Lights for Floe Pro 100 14 Foot Snowmobile Trailer
    From all the photos I saw online, it looks like Floe used grommet mounted 2-1/2 inch marker lights and standard 6-1/2 by 2-1/2 inch oblong taillights. If that's the case, for the amber 2-1/2 inch I would recommend # MCL59AB and # MCL59RB for the red marker light. The lamps use a standard # A55GB grommet to mount. The grommet is a fit for a 3 inch diameter rough opening. The lamps are designed to be used with a 2 pin pigtail like part # A49PB. I wasn't able to find a photo showing the...
    view full answer...
  • Brighter Trailer Tail Lights to Replace Bargman 92 Series Tail Lights
    There are brighter lights available for your current Bargman 92 Series lights, but none that have a reverse light function. So to replace your current lights with brighter LEDs you will need the LED Trailer Tail Light - Driver's Side # 328-003-81LM1 and LED Trailer Tail Light - Passenger Side # 328-003-81M1. That's the closest available for your mounting width, and I have added a link to a video install for you to check out. Additionally, you could just add separate reverse lights if...
    view full answer...
    Image 1 for
  • What Gauge Is The Wiring For The Pigtails That Connect To GloLight LED Backup Light # BUL111CB?
    The Pigtails # A45CB and # A49PB for the GloLight LED Backup Light # BUL111CB both use 18 gauge wiring. The Deka Heat Shrink Butt Connectors # DW05743-5 will allow you to make your wiring connections water tight. For the plugs you will need to use Dielectric Grease # 11755 to keep moisture out of the connectors and prevent wiring shorts.
    view full answer...
  • DOT Approved Trailer LED Reverse Light and an LED Interior Trailer Light
    Optronics light # BUL78CB is a utility light so it is not DOT approved to be used as anything other than that. For the interior of the trailer it will work fine, it doesn't have to be DOT approved since it isn't a tail, marker, reverse, brake, or turn signal light. It is about as tough as any other trailer light that you would find but I would not expose it to repeated impact from cargo. the lens or flange would eventually crack. If you are looking for a DOT approved reverse light with...
    view full answer...


< Previous



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.