Lift Spacers for Firestone Ride-Rite Air Helper Springs - 6" Spacers - Qty 2

See what our Experts say about this Firestone Accessories and Parts

• What Size are the Air Bags for Firestone Ride-Rite Red Label for a 2019 Ram 2500
  For your 2019 Ram 2500 the correct Firestone Ride-Rite Red Label air bag kit is part # F2706. The air bags in the kit have a maximum diameter of 7.52 inches at the widest point, compressed height of 3 inches, and extended height of 8.91 inches. However if your truck is lifted a spacer may be required to make up for the additional height. I have attached a photo of where to measure, and once you find that distance you can choose from the following if a spacer is needed. 6-1/2" - 7-1/2"...
  view full answer...
  
• Recommended Suspension Enhancement for a Lifted 2011 Toyota Tundra
  This will depend on how your 2011 Toyota Tundra was lifted. If it was a body/frame lift, then the SumoSprings # SSR-610-54 will work. This style of lift does not affect the suspension and basically keeps it stock, for the lack of a better word. However, if it was a suspension lift that was done, then they will not fit. This style of lift creates too much of a gap for the # SSR-610-54 to supply any kind of support. That being said, you are not completely out of luck with a suspension lifted...
  view full answer...
• Do I Need Lift Spacers with Firestone Ride-Rite Air Springs?
  You will need to add spacers, since you're right on the edge of the requirements, but the # F2366 would not be the correct size. Firestone has put together a chart/list that you can use to help you determine what kind of spacer you need. Since the distance between your brackets is 6-1/2", you should use the Firestone Lift Spacer # F2356 according to the chart/list below. Distance between top and bottom bracket: 6-1/2" - 7-1/2" - Lift Spacer # F2536 7-1/2" - 8-1/2" - Lift Spacer # F2366 8-1/2"...
  view full answer...
• Suspension Enhancement Recommendation for 2015 Chevy Silverado LTZ with 6" Lift
  For that much of a lift the only option is an air bag setup like the Firestone part # F2430 and a 6 inch spacer kit part # F2374 for your 2015 Chevy Silverado 1500 LTZ. The other suspension enhancement kits do not have options that allow for compensating for a 6 inch lift.
  view full answer...
• Recommended Firestone Air bag Kit For a Lifted 2002 Ford F-350
  The Firestone Ride-Rite Air Helper Springs # F2590 will definitely fit your 2002 Ford F-350 Dually, but the lift will need a few extra parts to get it installed. First and foremost, the stock jounce bumper spacers must still be on the vehicle for installation. From there, you will need to select the correct spacer to coincide with the amount of lift you have on the vehicle like the Firestone # F2366. This does not mean a 2 inch lift uses a 2 inch spacer, however. You will need to go off...
  view full answer...
• Will Firestone F2582 Ride-Rite Air Helper Springs Change Ride Height of 2019 Ford F-150
  At the 5psi minimum recommended by Firestone, installing their # F2582 Ride-Rite kit will not change your existing ride height, as long as your suspension isn't worn and is in good working order. If the suspension is worn, it could slightly raise the ride height. Also, you might need a lift spacer depending on how much lift has been added. If the lift is less than 1-1/2 inches, you won't need a lift spacer, according to Firestone. If the lift is greater than 1-1/2 inches, you will need...
  view full answer...
  
• Spacer Kit Recommendation for a 2004 Ford F-150 with Ride Rite Firestone Suspension and 6 in Lift
  The correct spacer kit you will need to use with a Firestone Ride Rite System part # F2350 that you plan to install on your 2004 Ford F-150 would be the part # F2374. The # F2506 is for vehicles that have a 2 inch lift.
  view full answer...
• Spacer For Firestone Air Bags On A Lifted 2008 GMC Sierra 2500
  The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle Item # F2250 are compatible with your 2008 GMC Sierra 2500. Having a lift does require spacers to install air bags. If you have a 7" lift on your truck in reality it may only be lifting the back of the truck 6" while the front is actually at 7". To determine the correct spacer needed you need to measure the distance between the top of your lower jounce bumper contact plate on your axle and the bottom of your upper...
  view full answer...
• Firestone Air Bag Kit Recommendation for 2016 Ford F-250
  For your 2016 Ford F-250 we have the Firestone kit part # F2597 which will work great, but we don't have a way to install these with an 8 inch lift. The tallest lift we have a spacer for is 6 inch like the part # F2374. Basically the only option we have would be for you to go down to a 6 inch lift and then use the spacer # F2374.
  view full answer...
• Picking Out Spacer Kit for Firestone Air Bag Kit that Fits 2013 GMC Sierra 1500
  Since not all 6 inch lift kits are the same what you'll need to do first is install the Firestone kit part # F2430 and then measure the distance between the upper and lower brackets of the kit. Distance between top and bottom bracket: 6-1/2" - 7-1/2" - Lift Spacer # F2536 7-1/2" - 8-1/2" - Lift Spacer # F2366 8-1/2" - 9-1/2" - Lift Spacer # F2367 9-1/2" - 10-1/2" - Lift Spacer # F2370 11-1/2" - 12-1/2" - Lift Spacer # F2374 Typically 6 inch lifts require the # F2370 so I'd almost guarantee...
  view full answer...
• Rear Air Bag Recommendation for 2003 Ford F-250 With 6-Inch Lift Kit
  Finding a compatible rear-axle air bag kit for your 2003 F-250 with 6-inch lift will hinge on whether your truck has a body lift or a suspension lift. If its a body lift, then you can use rear-axle kit # F2550 (that fits both 2WD and 4WD versions) without the need for spacers. If your truck has a suspension lift then you will need to add spacers # F2374. For reference I have linked several articles on Firestone air spring kits, including one that addresses the upgrade option of using...
  view full answer...
• Spacer Kits for Firestone Air Bag Kit on Truck with Lift Kit
  We have lift spacers designed to be used on lifted trucks with our Firestone kits like the part # F95FV which take up the extra space created by the lift kit so that the air bags engage like needed. We have 2 inch spacers # F2366, 4 inch spacers # F2370, and 6 inch spacers # F2374.
  view full answer...
• Can Air Bag Kit Install on 2015 Chevy Silverado 2500HD with 6 inch Lift Kit
  For the Firestone Ride Rite kits that fit your 2015 Chevy Silverado 2500HD like the part # F2613 we have 6 inch spacers to take up the space created by the lift kit like the # F2374 which is a 6 inch spacer.
  view full answer...
• Firestone Air Bag Kit and Compressor Recommendation for 2017 Ford F-250 with 6 inch Lift
  Firestone has 6 inch spacer kit for use with their kits as part # F2374. But you have to determine first if your lift is all suspension or if it's a body lift and suspension lift combination which is most common on lifts of your size. Basically the spacer you'll need is the amount the suspension height changed. So let's say your lift was a 4 inch suspension lift with a 2 inch body lift. Then you'd need the 4 inch spacer part # F2370. I also attached a link to a page that has all of the...
  view full answer...
• Does Jounce Bumper of 2016 Ford F-250 Remove to Install Firestone Ride Rite
  You do not need to have the jounce stop installed on your 2016 Ford F-250 to install the Ride Rite kit part # F2582 as removing the jounce is actually the first step when installing this kit. Since you have a lift kit though you will need a spacer kit to take up the extra room created by the lift. For example if you have a 2 inch lift you'd want part # F2366, 4 inch lift part # F2370, 3 inch lift part # F2367, or 6 inch lift part # F2374.
  view full answer...
• How to Use Air Lift LoadLifter Air Bags on a 2015 GMC Sierra 2500 with 6 Inch Lift
  Yes, the Air Lift LoadLifter 7500 XL Air Helper Springs part # AL57538 will work on your 2015 GMC Sierra 2500. However, you don't need to use the 7500 XL system nor would I advise it. Instead, I recommend the Air Lift LoadLifter 5000 Air Helper Springs part # AL57338. The 7,500 lb and 5,000 lb weight capacity you see is for pin/tongue weight, not gross trailer weight as the the pin/tongue weight is the only part that is directly over the top of the airbags. They will however both do an...
  view full answer...
• Can Firestone Ride Rite Kit Install on Truck with 6 inch Lift
  Yes, Firesone makes lift spacers like the part # F2374 which allows their air bag kits like the part # F2582 to fit on vehicles with lifts. The spacer # F2374 is a 6 inch spacer which would be what you need if your lift raised the suspension of your truck 6 inches. A lot of times a 6 inch lift really lifts about 5 inches so if that's the case for you you'd instead want the part # F2373 for a 5 inch spacer kit.
  view full answer...
  
• Firestone Air Bag Spacers Needed for 2014 Ford F-350 with a 4" Lift
  You actually may not even need that much of a spacer. Since the air bags themselves take up some space Firestone has put together a formula that you can use to help you determine what kind of spacer you need. To figure out the needed spacer simply measure the distance between where the brackets would be and choose from the following: 6-1/2" - 7-1/2" - Lift Spacer # F2536 7-1/2" - 8-1/2" - Lift Spacer # F2366 8-1/2" - 9-1/2" - Lift Spacer # F2367 9-1/2" - 10-1/2" - Lift Spacer # F2370 11-1/2"...
  view full answer...
  
• Spacers to Install Firestone Ride-Rite Air Helper Springs on 2007 Chevy Silverado with 6" Lift
  The Firestone Ride-Rite Air Helper Springs # F2250 are a great option to add suspension enhancement to your 2007 Chevrolet Silverado 2500HD Classic. You can accommodate the 6 inch lift that your Silverado has by using the Lift Spacers for Firestone Ride-Rite Air Helper Springs # F2374 which are for vehicle with a 6 inch lift. You can verify that these will fit by making sure that the distance between the upper and lower brackets are between 11-1/2 inches and 12-1/2 inches. Another great...
  view full answer...
• How to Determine the Type of Lift Spacer Needed
  The correct way to measure for a lift spacer is when the truck is on the ground without any added weight in the bed of the truck. You will want to measure from the bottom of the top bracket to the top of the bottom bracket where the air bags attach. Space From Top To Bottom Bracket: 6.5" to 7.5" - part # F2536 7.5" to 8.5" - part # F2366 8.5" to 9.5" - part # F2368 10.5" to 11.5" - part # F2373 11.5" to 12.5" - part # F2374 These lift spacers are designed to be placed on the bottom bracket...
  view full answer...
• Will the Firestone Ride-Rite Systems Work on a 2007 Nissan Titan with 6 Inch Lift
  In order to use the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2355 on a 2007 Nissan Titan with a 6" lift you'll need to add some lift spacers to the bags. Typically for a 6" lift you'll need the Lift Spacers for Firestone Ride-Rite Air Helper Springs - 6" Spacers - Qty 2 # F2374, but you'll want to confirm that the distance between where the upper and lower brackets mount the frame is between 11.5" and 12.5". If you've got a different distance between the...
  view full answer...
• Air Spring Recommendation for a 2002 Ford F250 with a 6 inch Lift Kit
  Since you have a 6 inch lift kit on your 2002 Ford F-250 you would need the Lift Spacers for Firestone Ride Rite Air Springs part # F2374 to go along with the Firestone Ride-Rite Air Helper Springs # F2550. This kit is confirmed to work on vehicles that have gooseneck hitches installed so it should work well for you, but since your setup is custom I would recommend you check out the installation instructions I attached and compare them to the hitch you have to see if the mounting hardware...
  view full answer...
• How to Make the Firestone Ride-Rite Air Helper Springs Work with a 2002 GMC Sierra with 6" Lift
  Since you have a 6" lift on your 2002 GMC Sierra you will need a lift spacer in order for the Firestone Ride-Rite Air Helper Springs to work. If you tell me what chassis you have (1500, 2500, 3500), whether it is a light-duty (LD) 6-lug or heavy-duty (HD) 8-lug, and whether it is 2 or 4 wheel drive I can confirm if the kit you have is the correct one for your vehicle. The correct way to measure for a lift spacer is when the truck is on the ground without any added weight in the bed. You...
  view full answer...
• Will The SumoSprings SSR-610-40 Fit A 2018 Tundra With 1.25 Rear Lift Shackles
  I spoke to SuperSprings and their SumoSprings Solo Custom Helper Springs # SSR-610-40 may work on your 2018 Tundra, but you will need to measure something to make sure as they are designed for stock ride height. When the # SSR-610-40 is installed, it will measure 6.25" tall. Typically there will be a gap that is anywhere from .25" to 1" from the top of the spring to the bottom of the frame where it will make contact. They said that a gap that is larger than 1", they may not work very well....
  view full answer...

Do you have a question about this Accessories and Part?