WeatherTech Rear Floor Liner Review - 2012 Jeep Wrangler Unlimited Video

Products Featured in this Video

Review of the WeatherTech Rear Floor Liner on a 2012 Jeep Wrangler Unlimited

All right, today in this 2012 Jeep Wrangler Unlimited, we're going to do a test fit of WeatherTech floor liner and the second row. This will be part number WT441052. The WeatherTech liners are custom mold to precisely fit the vehicle and stay in place. The shape, the channels and the moldings all work to keep dirt and debris contained in the liner and not in your carpet. Now you see there's about… see more >

Info for these parts were:

Video Edited:

Chris R

Test Fit:

Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular

Videos

Help Articles

Expert Answers

Canine Covers Vehicle Cargo Area Mat Review

WeatherTech Cargo Liner Review - 2014 Jeep Wrangler Unlimited

Choosing the Right Trailer Wiring

Choosing the Right Brake Controller

Lippert Center Point Trailair Air-Ride Suspension Upgrade Review

Roadmaster Direct-Connect Base Plate Kit Installation - 2019 Jeep Wrangler Unlimited RM-521453-5

Blue Ox Aftermarket Off-Road Bumper Adapter Review

Curt Custom Base Plate Kit Installation - 2017 Jeep Wrangler Unlimited

Roadmaster Direct-Connect Base Plate Kit Installation - 2017 Jeep Wrangler Unlimited

How to Choose the Right Trailer Hitch Class

Trailer Wiring Diagrams

Brake Controller 7- and 4-Way Installation Kit (ETBC7)

Choosing the Right Suspension Kit for Your Truck and Trailer

Stability Control for Heavy Duty Vehicles

5 Things to Know About Weight Distribution Hitches

RV Sway Control, Stabilization, and Suspension Enhancement

Determining Trailer Tongue Weight

Rooftop Cargo Carriers

Trailer Tire Sizing

Brake Controller Installation: Starting from Scratch

Performance Chips and Modules

Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement for Demco Master Cylinder 05680-C for Drum Brakes

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Replacement For Fulton Drop-Leg Stabilizer Jack

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does Air Dam get Permanently Removed to Install Base Plates on a 2012 Jeep Wrangler Unlimited

Looking at the installation instructions for base plates #RM-521448-5 you will need to remove the air damn, trim it according to the instructions, and then reinstall it. Trimming is needed for proper installation of the base plates.

view full answer...