Is SumoSprings SS26MV Same as TSS-107-47

Question

Question:

Is the SS26MV a replacement number for the TSS-107-47 part on Supersprings’ website that they list for 5000-8000# spring over axle?

asked by: Rod B

0

Expert Reply:

Yes, the SumoSprings # SS26MV is the same as the TSS-107-47 that you mentioned.

expert reply by: Jameson C

0

Answer 1

It appears that your u-bolt plate on your 2021 Grand Design Reflection 31MB, will work with the SumoSprings Trailer Helper Springs #SS26MV. The plate itself including the bends does not appear to be larger than 3/4" nor does the width appear…

view full answer...

Answer 2

The SumoSprings Trailer Helper Springs item #SS26MV require 5-5/16" - 6-1/2" of clearance. This is from the top of the spring plate to the bottom of your trailer. Since you are right at 5" you should be ok once you jack…

view full answer...

Answer 3

I reached out to the manufacturer, SuperSprings, who said a leaf spring plate (U-bolt plate) that is 4 inches in width with 3 inches in between bolts is absolutely compatible with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket -…

view full answer...

Answer 4

If your 7K axles have overslung leaf springs (sits atop the axle), the SumoSprings TSS-107-47 which we sell as part #SS26MV would for well for you. The kit includes a line relocation kit in case there's a wiring harness, water or gas line in the…

view full answer...

Answer 5

The SumoSprings kit part #SS26MV would work great on your tandem axle trailer that has 5,200 lbs and cushioned equalizers. This will give you additional support and smooth out the ride quality as well. This kit is also listed as TSS-107-47 which…

view full answer...

Answer 6

Yes, the SumoSprings Trailer Helper Springs #SS26MV does work with your spring plate design. What you have is the standard design as the bends help provide additional support for the plate.

view full answer...

Answer 7

Because they are maintenance free, less expensive and easier to install than shocks, I'd definitely recommend going with the SumoSpring option. They'll work with your existing leaf spring suspension to help dampen the suspension, but will…

view full answer...

Answer 8

The Lend-a-Hand Extra Large Folding Grab Handle for RVs - Black with Black Foam Grip - Aluminum #AM-533 have brackets that have three holes in each. I went out to our warehouse to measure for you and the holes from top bracket to bottom bracket are…

view full answer...

Answer 9

Yes, unfortunately! If some rapscallion happened to close the Lend-a-Hand Extra Large Folding Grab Handle for RVs #AM-533 over your door while you were still inside, you'd effectively be trapped. You can see at the 0:50 mark in the video attached…

view full answer...

Answer 10

The Lend-a-Hand Extra Large Folding Grab Handle #AM-533 has a distance of 19.5" from the bottom of the top mounting bracket to the top of the bottom mounting bracket. It appears that the measurement Stromberg has on their site is in reference to…

view full answer...

Answer 11

The Stromberg Carlson shim kit, part #5991-SM, is just one shim. It's kind of misleading since it's called a kit but if you need two you do need to order two of them.

view full answer...

Answer 12

When installing the Sumo Trailer Springs #TSS-107-40, is very important as the Trailer SumoSprings provide the maximum level of vibration reduction and damping with the 1/4”-1/2” preload. That being said, the measurement is extremely close and after…

view full answer...

Is SumoSprings SS26MV Same as TSS-107-47

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching