Saris Bike Racks Swing Away Hitch Extender Review Video

The Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches #S94FR and Saris Swing Away Hitch Extender #SAR36VR will work well together. This is definitely the setup I recommend on your Mercedes Sprinter Van RV since you would like access to…

I had the Saris Swing Away Hitch Extender for Bike Racks - 2" Hitches #SAR36VR measured and have some diagrams below that will help. I will say that the hinge will measure about 23 inches from the center of shank and will not extend past your…

The distance from the hitch pin of the Flint Hill Goods cargo carrier #FHG49ZR to the nearest edge of the carrier is 8-1/2 inches. The distance from hitch pin hole to outside edge of the carrier is 30-1/2 inches. The inside dimensions are 58-3/16…

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

The hooks on the Blue Ox 7' Safety Cables #BX88196 are 0.53" in diameter. The opening inside the hook is 0.83" and the width of the hook is 1.91". I have included an image of this so you can verify if you will be able to fit it…

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

If you are trying to get the swing away adapter that is closest to the vehicle's bumper, here are the measurements to the closest part of the rack from the shank receiver pinhole: Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks #PVP20B:…

In order to transport a girl's bike (or any bike with alternative style frames) to a hanging rack like the Malone Runway 4 Bike Rack #MAL72VR, you will just need a bike frame adapter bar. I recommend the Kuat #UB01 because of how easy it…

It is safe to tow with a hitch extender like the Curt #C45796, but it is important to note that using any type of adapter, including an extender, reduces the weight capacity of your hitch by 50 percent.

From the center of the hitch pin hole to the upright portion of the Saris swinging hitch adapter #SAR36VR the measurement is 9 inches so this would easily clear past your spare since it is 7-3/4 inches out past the rear hitch pin.

I have included a picture showing Draw-Tite front mount receiver #65076 installed. It and the Curt hitch install in pretty much the same place.

The Yakima BackSwing #Y02483 is 41 inches from hitch pin hole to the furthest point of the receiver tube when open. It is 31-1/2 inches from the hitch pin hole straight out to the inside edge of the receiver tube. It is 22-3/4 inches from inside edge…