Erickson Chrome Protector Sleeve Review Video

You have a Class I trailer hitch and what you are describing is a stop that was intentionally punched in the receiver of the hitch. It is there to prevent the use of Class II accessories that could lead to the hitch being overloaded. Your bike rack…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

It sounds like you would like to carry 2 Hobie Mirage Outback Kayaks on your Yakima Overhaul bars. The Yakima Overhaul comes with crossbars that measure 68" long x 3" wide x 1-1/2" thick. From my research the Hobie Mirage Outbacks are…

Without knowing the size of your trailer I cannot adequately answer whether or not it will work for your situation. Securing the kayaks, safely, in the trailer would be your greatest challenge. It is safer to attach and secure the kayaks to a…

You really could use either one of the 68" #Y01158 or 78" #Y01159 bars, but I have a feeling that the 78" bars are going to stick out a little bit too far, so I do recommend going with the 68" Yakima HD Bars #Y01158. Obviously…

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

We had the chance to install the Rhino Rack roof rack you have #RRVA118B-2, #RRRLKVA, and #DK438 on a very similar 2016 Honda Fit and we found that the feet fit to the inside of the channel you mentioned. Check out the picture I attached to see this.…

You do not need to use the Curt Cam Buckle Stabilizing Strap #18050 with the Curt Trailer Hitch Receiver #C11473 that fits your 2017 Toyota Prius. Curt did previously require the use of the strap with accessories like bike racks to maintain the…

We have not had a chance to do a specific video of the 2008 model coupe. We are at the mercy of our customers who come in for installs to determine what year, makes, and models we are able to shoot videos for. I was able to attach the installation…

I was able to find your order and your Curt Class I Trailer Hitch Receiver #C11430 is rated for the torque on your hitch in all driving conditions including inclines. Please make sure you are using the required Curt Trailer Hitch Support Strap #18050…

With cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I…

The Bulldog Winch Ratcheting Wheel Tie-Down Strap #BDW20362 is designed to connect to a D-Ring type of connection point so you wouldn't need to install an e-track on your trailer. For your application I recommend installing the Brophy D-Ring Tie…