Trailer Wiring Harness Installation - 2017 Nissan Titan N40975 Video

Even though your 2017 Nissan Titan doesn't have the tow package it should still have the standard round connector to install trailer wiring behind the rear bumper. Part #N40975 includes the 7-way and 4-way connector that plugs right into your…

The Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers #63080 is the closest thing we have found to what you are seeking. This plastic part does serve as an anti-rattle and will reduce that wear from the softer metal. There…

The pin on your Titan's 7-way trailer socket that should carry the 12V power feed for your trailer is the pin located at the 1-o-clock position as you view the socket. Please refer to the linked photo that I have prepared for you. If you have no…

Yes the Curt Nissan Relay kit part #C57000 will work as the needed relays for your 2021 Nissan Titan for the tow package wiring.

We do carry the wiring harness you need. For a 2004 Nissan Titan that does not have a towing package, you will need the Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector, #N40975 that you have referenced. The harness comes with the…

Basically they are the same connector with just a slightly different part number. We carry the part #HM40975 and if you ordered the 40974 from someone else (not recommended haha) you'd get the same thing which just a different part number on the…

Yes, the Hopkins 7-way/4-way kit part #HM40975 does fit the factory plug behind the bumper of your 2020 Nissan Titan. The harness would have enough length to reach and install as well. You could cut a hole to mount it or you could use the included…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

You seem to be looking in the correct location for the factory brake controller port on your 2011 Nissan Titan. The white plug with the brake controller tag attached to it that you mentioned finding is what you are needing. As you referenced, it will…

Yes, there is only one type of 7-way blade connector. I am attaching a help article about wiring that may be of interest to you.

For your 2018 Nissan Titan XD, there is not a confirmed fit trailer hitch receiver meaning the manufacturer has not yet tested your vehicle for a fit. I reached out to my tech contact at Curt and also did some research and have found no changes in…

I only see one picture that you sent in and it shows an OBDII connector which is not what you need to connect to for a brake controller. The harness you need is the part #3050-P. The harness it plugs into will be located under the dash, to the left…