Recommendation to Reduce Aluminum Ball Mount Wear Due to Steel Hitch Receiver

Question

Question:

I have seen a number of complaints stemming from aluminum tow hitches gouged by a steel receiver. Obviously the steel is harder than the aluminum. Is there any sort of plastic sheath available to take up the space between the aluminum hitch stem and the steel receiver. Seems like a pretty easy thing to come up with. Thanks

asked by: Don H

1

Helpful Expert Reply:

The Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080 is the closest thing we have found to what you are seeking. This plastic part does serve as an anti-rattle and will reduce that wear from the softer metal. There isn't a plastic sleeve reducer for the inside of the receiver as that would break down and eventually either change towing capacity or create rattle.

expert reply by: Jason S

1

click to enlarge

Answer 1

What is probably happening is that the collar around the receiver opening on the Curt hitch has a very thick powder coat that is preventing the Draw-Tite QSP #63080 from fitting properly. If you were to sand away some of the powder coat on the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and…

view full answer...

Answer 4

The Draw-Tite Max-Frame Trailer Hitch Receiver #76020 for your 2023 Mazda CX-9 is no longer compatible with the J-Pin 63201. Draw-Tite stopped making their receivers compatible with this pin in 2021 and we have long sold through all those…

view full answer...

Answer 5

No, it doesn't but I have a less expensive one that does. For your 2023 Mazda CX-9 you will want the Draw-Tite Hitch item #76020. This hitch is custom fit and bolts to your Mazda with included hardware. I really like this hitch because it…

view full answer...

Answer 6

Based on the dimensions you mentioned the correct Dexter EZ Flex kit you would need is the part #K71-654-00 which is compatible with what you have and will do a great job improving ride quality.

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The underbody panel you're referring to can be placed back on, but you'll have to trim it around the etrailer Trailer Hitch Receiver - Custom Fit #e87AR in order to get it to fit. It is a bit challenging with this vehicle so most…

view full answer...

Answer 9

The height of the Draw-Tite Hitch #75876 from the bottom of the receiver to the top of the mounting brackets is 10-11/16 inches. I attached a picture I made below to illustrate where it is measured. Ground clearance can vary from car to car due to…

view full answer...

Recommendation to Reduce Aluminum Ball Mount Wear Due to Steel Hitch Receiver

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching